screws pdf Datasheet P12 Full Text Search --- IC-ON-LINE


	Part Number	Hot Search : SF20L R16V226 SSH108 1N5817 AD822 106K0 MAX32 NL17S
	Product Description
	Full Text Search

screws Datasheet PDF File

For screws Found Datasheets File :: 7527 Search Time::4.156ms
Page :: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | <12> | 13 | 14 | 15 |

				TE Connectivity Ltd
Part No.	411-18527 5-0744014-7
OCR Text	...nd remove the two die retaining screws from the tool jaws. 2 . move the wire and insulation crimper dies, with the chamfers facing the front of the stationary jaws. 3. insert a die retention screw (m4x25) through the jaw and die and tighten...
Description	This ERGOCRIMP Die is suitable to crimp the following crimp contacts
File Size	212.35K / 11 Page	View it Online	Download Datasheet

				TE Connectivity Ltd
Part No.	411-18269 2-744010-8 1-0519151-1 1-0519151-3
OCR Text	...nd remove the two die retaining screws from the tool jaws. 2 . move the wire and insulation crimper dies, with the chamfers facing the front of the stationary jaws. 3. insert a die retention screw (m4x25) through the jaw and die and tighten...
Description	This ERGOCRIMP Die is suitable to crimp the following crimp contacts
File Size	124.92K / 11 Page	View it Online	Download Datasheet

				MolexKits
Part No.	38780-0102 38780-0103 38780-0104 39100-0803 39100-0804 39531-1002 39531-1003 39531-1004 39544-3002 39544-3003 39544-3004 39970-0102 39970-0103 39970-0104 39533-2002 39533-2003 39533-2004 76650-0233
OCR Text	...er circuit sizes * Contacts and screws are recessed in the housing to help prevent short circuits * Rising cage clamp wire termination provides secure, reliable contact * Multiple PCB terminals distribute power more evenly, reducing "hot sp...
Description	PCB Header, PCB Through Hole, Screw Mounted, Vertical PCB Block
File Size	5.87K / 3 Page	View it Online	Download Datasheet

				SynQor Worldwide Headquarters
Part No.	PQ60033QTB35NKS
OCR Text	... (37.3) 1.47 NOTES 1) M3 screws used to bolt unit's baseplate to other surfaces (such as heatsink) must not exceed 0.100" (2.54 mm) depth below the surface of the baseplate 2) Applied torque per screw should not exceed 6in-lb. (0.7 N...
Description	High Efficiency, Isolated DC/DC Converter, with Baseplate
File Size	232.56K / 2 Page	View it Online	Download Datasheet

				TE Connectivity Ltd
Part No.	411-18235 0-744003-5
OCR Text	...nd remove the two die retaining screws from the tool jaws. 2 . move the wire and insulation crimper dies, with the chamfers facing the front of the stationary jaws. 3. insert a die retention screw (m4x25) through the jaw and die and tighten...
Description	This ERGOCRIMP Die is suitable to crimp the following crimp contacts
File Size	93.10K / 11 Page	View it Online	Download Datasheet

				Crydom Inc.,
Part No.	MCTC2425 MCTC2450 MCTC2490 MCTC4825 MCTC4850 MCTC4890
OCR Text	....5g) Thermally conductive Epoxy screws and Saddle Clamps Furnished, Unmounted Barrier Strip Screw Terminals 8-32 screws -20 in. lbs.(screws dry without grase) OUTPUT STATUS FUNCTIONS Description Initial Logic Supply On Operating (to 85 ...
Description	Microprocessor based temperature controller / SSR
File Size	1,372.54K / 6 Page	View it Online	Download Datasheet

				Amphenol Corporation
Part No.	P-MUSBR-AHD2-XX1XX
OCR Text	...t grommets, one cable tie, two screws & two washers. 2. screws & washers are supplied pre-assembled to the cover plate. screws will float & be captured by the cover plate to minimize loss of parts during use. the hood can be field or ...
Description	TO ORDER CABLE TIES SEPARATELY
File Size	243.42K / 3 Page	View it Online	Download Datasheet

				HIROSE ELECTRIC Co., Ltd. Amphenol, Corp.
Part No.	HR31-5.08P-5PC HR31-5.08P-5PD HR31-5.08P-5PDL HR31-5.08P-5SC HR31-5.08P-5SD HR31-5.08P-5SDL HR31-5.08PA-5PC HR31-5.08PA-5PD HR31-5.08PA-5PDL HR31-5.08PA-5SC HR31-5.08PA-5SC1 HR31-5.08PA-5SD HR31-5.08PA-5SDL HR31-5.08R-5PC HR31-5.08R-5PD HR31-SC-121 HR31-5.08P-5SC01 HR31-5.08R-5PDL HR31-5.08R-5PDL05
OCR Text	...ied. Connectors are attached by screws from the opposite side. Hirose HR31 Crimped and connected to terminal then fastened simply by inserting into housing. Plug height is 10.2 mm, allowing use of less space when mounting several connectors...
Description	5 CONTACT(S), MALE, POWER CONNECTOR, SOLDER, RECEPTACLE 5 CONTACT(S), FEMALE, POWER CONNECTOR, CRIMP, PLUG Interface Connectors for Factory Automation Network
File Size	255.76K / 7 Page	View it Online	Download Datasheet

				Sanyo Semicon Device
Part No.	LA4485
OCR Text	...of the holes in the IC tab. Use screws with heads equivalent to truss head machine screws and binding head machine screws stipulated by JIS for the mounting screws. Furthermore, washers must be used to protect the surface of the IC tab. Mak...
Description	5 W, Two-channel Power Amplifier with Very Few External Parts
File Size	494.95K / 20 Page	View it Online	Download Datasheet

				Amphenol Corporation
Part No.	P-MUSB-E551-XX
OCR Text	screws: 0.23 to 0.34 n.m (2.00 to 3.00 8. 1=with grey dust cover supplied 7. 4=no dust cover supplied 5=with black dust cover supplied series, rugged usb 0=no dust cover supplied single port, vertical pcb tails ordering code: m u s b - ...
Description	DUST COVERS MAY BE ORDERED SEPARATELY
File Size	67.47K / 2 Page	View it Online	Download Datasheet

For screws Found Datasheets File :: 7527 Search Time::4.156ms
Page :: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | <12> | 13 | 14 | 15 |