| PART |
Description |
Maker |
| B41858 |
Aluminum electrolytic capacitors Single-ended capacitors
|
TDK Electronics
|
| B43888 |
Single-ended capacitors
|
EPCOS[EPCOS]
|
| B41896D5108M000 B41896D5108M001 B41896D5188M000 B4 |
Single-ended capacitors
|
EPCOS
|
| B41889A3108M B41889A3108M000 B41889A3108M001 B4188 |
Single-ended capacitors
|
EPCOS
|
| B41886A5477M00 B41886 B41886A2108M00 B41886A2158M0 |
Single-Ended Capacitors Lowest Impedance
|
EPCOS[EPCOS]
|
| B41859F7108M00 B41859 B41859A2108M00 B41859A2158M0 |
Single-Ended Capacitors Very Low Impedance
|
EPCOS[EPCOS]
|
| B43857A4335M00 |
Single-Ended Capacitors High Reliability 单端电容高可靠
|
EPCOS AG
|
| B41820A6104M00 B41820A6105M00 B41820A7475M00 |
Single-Ended Capacitors Low Profile 单端电容超薄
|
EPCOS AG
|
| A759BQ106M1VAAE090 A759BQ106M1HAAE090 A759BQ106M2C |
Single-Ended Conductive Polymer Aluminum Solid Electrolytic Capacitors
|
Kemet Corporation
|
| B41895F6108M B41895F6128M B41895A7108M B41895A8827 |
Single-ended capacitors
|
TDK Electronics
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| MAX1286 MAX1286EKA-T MAX1287 MAX1287EKA-T MAX1288 |
150ksps / 12-Bit / 2-Channel Single-Ended / and 1-Channel True-Differential ADCs in SOT23
"150ksps, 12-Bit, 2-Channel Single-Ended, and 1-Channel True- Differential ADCs in SOT23"
150ksps, 12-Bit, 2-Channel Single-Ended, and 1-Channel True-Differential ADCs in SOT23 2-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO8
|
Maxim Integrated Produc...
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
Linear Technology, Corp.
|
