PART |
Description |
Maker |
EPM-PS1 |
The EPM-PS1 is a DC switching power supply designed for high reliability in a wide variety of applications.
|
List of Unclassifed Manufacturers
|
30KPA120A-HR 30KPA30A-HR |
The 30KPA-HR High Reliability Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events
|
Littelfuse
|
5KP180A-HRA 5KP85A-HRA 5KP48A-HRA 5KP15A-HRA |
The 5KP-HRA High Reliability Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events
|
Littelfuse
|
REC-10LA |
Precision Linear Transducers, Designed for Mount in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Designed for High Pressure Chamber of Small Cylinders, Equipped with Glass-Sealed Electrical Outputs
|
Vishay
|
REC-14LH REC-16LH |
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Unsealed, Designed for High Pressure Chamber of Cylinders, High Accuracy, Very Good Repeatability
|
Vishay
|
GD500SD |
The GD500SD is designed for low power rectification and high reliability. SURFACE MOUNT SCHOTTKY BARRIER DIODE SURFACE MOUNT SCHOTTKY BARRIER DIODE
|
E-Tech Electronics LTD GTM CORPORATION
|
980 980-TYPE |
980-Type Ultrahigh- Reliability Pump Laser Module 980-Type Ultrahigh- Reliability Pump Laser Module Ultrahigh-Reliability Pump Laser Module
|
AGERE[Agere Systems]
|
MCP100T-270I_TT MCP100T-300I_TT MCP100T-315I_TT MC |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3 The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d CPU / System Supervisors Microcontroller Supervisory Circuit with Push-Pull Output
|
MICROCHIP[Microchip Technology] Microchip Technology Inc. Microchip Technology, Inc.
|
KIC9321F-008 |
CMOS LSI Designed For FM/MW/LW Radio of PLL Frequency Synthesizer System(用于锁相环频率合成系统FM/MW/LW波段调谐的CMOS大规模集成电 CMOS LSI Designed For FM/MW/LW Radio of PLL Frequency Synthesizer System(用于锁相环频率合成系FM/MW/LW波段调谐的CMOS大规模集成电 的CMOS大规模集成电路设计调中波/龙运的锁相环频率合成系统的无线电(用于锁相环频率合成系统调频/中波/龙运波段调谐的的CMOS大规模集成电路)
|
KEC Holdings
|
NE56610 NE56610-42GW NE56610-45GW NE56612-45GW NE5 |
Family of devices designed to generate a reset signal for a variety of microprocessor and logic systems 家庭旨在生成一个微处理器和逻辑的各种复位信号系统设 Family of devices designed to generate a reset signal for a variety of microprocessor and logic systems 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5
|
NXP Semiconductors N.V. PHILIPS[Philips Semiconductors]
|