PART |
Description |
Maker |
125-0304-0 125-0311-5 125-0309-3 125-0302-4 125-03 |
KUPPLUNG PUSH PULL UEBERWURFKAPPE 16POL EINBAUBUCHSE PUSH PULL 16POL KUPPLUNG PUSH PULL UEBERWURFKAPPE 12POL EINBAUBUCHSE PUSH PULL 12POL EINBAUSTECKER PUSH PULL 20POL EINBAUSTECKER PUSH PULL 12POL STECKER PUSH PULL UEBERWURFKAPPE 12POL STECKER PUSH PULL UEBERWURFKAPPE 20POL KUPPLUNG PUSH PULL UEBERWURFKAPPE 20POL STECKER PUSH PULL UEBERWURFKAPPE 16POL EINBAUSTECKER PUSH PULL 16POL STECKER AUSSENGEWINDE 16POL EINBAUSTECKER PUSH PULL 8POL KUPPLUNG AUSSENGEWINDE 16POL STECKER AUSSENGEWINDE 20POL EINBAUBUCHSE PUSH PULL 20POL EINBAUBUCHSE推拉20POL STECKER AUSSENGEWINDE 6POL STECKER AUSSENGEWINDE 6POL EINBAUSTECKER PUSH PULL 6POL EINBAUSTECKER推拉6POL EINBAUSTECKER AUSSENGEWINDE 4POL
|
Molex, Inc.
|
L293C 1329 |
PUSH-PULL FOUR CHANNEL/DUAL H-BRIDGE DRIVER PUSH-BRIDGE DRIVER PUSH-PULL FOUR CHANNEL/DUAL From old datasheet system
|
ST Microelectronics STMICROELECTRONICS[STMicroelectronics]
|
MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ... Push-Pull Output Sub-Microamp Comparators The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package, The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package. The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ... The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... From old datasheet system IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
LTC1450CN LTC1450LCN LTC1450CG |
Parallel Input, 12-Bit Rail-to-Rail Micropower DACs in SSOP Quad, Micropower, Push-Pull Outputs, LinCMOS(TM) Voltage Comparator 14-TSSOP 0 to 70 Quad, Micropower, Push-Pull Outputs, LinCMOS(TM) Voltage Comparator 14-SOIC 0 to 70 PARALLEL, WORD INPUT LOADING, 14 us SETTLING TIME, 12-BIT DAC, PDSO24
|
Linear Technology Corporation Linear Technology, Corp.
|
MC-7852G MC-7852 |
CATV 18 dB PUSH-PULL AMPLIFIER
|
NEC Corp. NEC[NEC] CEL[California Eastern Labs]
|
DRF130111 |
MOSFET Push-Pull Hybrid
|
Microsemi Corporation
|
AG606 AG606-G AG606-PCB |
Push-Pull CATV Amplifier
|
WJ Communication. Inc.
|
FP204 |
Push-Pull Circuit Applications
|
SANYO[Sanyo Semicon Device]
|
S8740240GT |
GaAs Push Pull Hybrid
|
PDI
|
KR01-10J-12S KR01-10P-12S KR01-10J-12P KR01-10P-12 |
one touch push pull lock
|
Hirose Electric
|
SGM8704 |
Push-Pull Output Comparator
|
Shengbang Microelectron...
|
|