PART |
Description |
Maker |
ISRVGC0118 |
miniature chip type designed for surface mounting
|
IDEA.lnc.
|
IVGC0128 |
miniature chip type designed for surface mounting
|
IDEA.lnc.
|
JYOBC0118 |
miniature chip type designed for surface mounting and measure approximately 2.5 x 3 mm
|
IDEA.lnc.
|
JYGC0118 |
miniature chip type designed for surface mounting and measure approximately 2.5 x 3 mm
|
IDEA.lnc.
|
JDVGC0118 |
miniature chip type designed for surface mounting and measure approximately 2.5 x 3 mm
|
IDEA.lnc.
|
JYGC0128 |
right-angle bi-color miniature chip type
|
IDEA.lnc.
|
JDVGC0128 |
right-angle bi-color miniature chip type
|
IDEA.lnc.
|
JDGC0128 |
right-angle bi-color miniature chip type
|
IDEA.lnc.
|
303UC501E 303UC502E 303UC101E 303UC102E 303UC103E |
Miniature 3 mm surface mount chip-type cermet trimmer potentiometer
|
CTS Corporation
|
AM29824DM AM29826DM AM29822DM AM29822LMB AM29822DM |
9-Bit D-Type Flip-Flop Reference Design kit for the iP1206 a 300kHz, 30A Synchronous Buck Converter; A IRDCIP1206-B with Standard Packaging Intelligent Power Module. Gate Driver IC integrated with a half bridge FredFET Designed for sub 250W Motor Drive applications in a 9-Lead SIP. RDSon of 1.0 Ohm; A IR3101 with Standard Packaging 10位D型触发器 IR1150 Demo Board designed for use in continuous conduction mode boost converter applications for power factor correction and harmonic current reduction.; A IRAC1150-300W with Standard Packaging 10位D型触发器 Octal D-Type Flip-Flop 八路D类触发器
|
Toshiba, Corp. Electronic Theatre Controls, Inc. ITT, Corp. ATM Electronic, Corp.
|
C16006 |
Asymmetric IESNA Type I (short) beam designed for tilted poles
|
Ledil, Inc.
|