 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MHW913/D UHF Silicon FET Power Amplifier Designed specifically for the Pan European digital 8.0 watt, GSM mobile radio. The MHW913 is capable of wide power range control, operates from a 12.5 volt supply and requires less than 100 mW of RF input power. * Specified 12.5 V Characteristics RF Input Power 100 mW (20 dBm) RF Output Power = 14 W Minimum Gain = 21.5 dB Minimum Efficiency = 35% * 50 Input/Output Impedance * Guaranteed Stability and Ruggedness * Epoxy Glass Substrate Eliminates Possibility of Substrate Fracture * Circuit board photomaster available upon request by contacting RF Tactical Marketing in Phoenix, AZ. MHW913 14 WATT 880 - 915 MHz RF POWER AMPLIFIER CASE 301AB- 02, STYLE 1 MAXIMUM RATINGS (Flange Temperature = 25C) Rating DC Supply Voltage RF Input Power RF Output Power Storage Temperature Operating Case Temperature Symbol Vbias, VS2, VS3 Pin Pout TC Tstg Value 5.0 15.6 200 15 - 30 to +100 - 30 to +100 Unit Volt mW Watt C C ELECTRICAL CHARACTERISTICS (VS2 = VS3 = 12.5 Vdc, Vbias = 4.8 Vdc, TC = 25C, 50 system, unless otherwise noted) Characteristic Frequency Range Efficiency (Pout = 14 W) (1) Power Gain (Pout = 14 W) (1) Harmonic Output (Pout = 14 W Reference) (1) Input VSWR (Pout = 14 W) (1) Linearity -- % AM in Output Pout = 0.02 to 14 W; 135 kHz, 1.0% AM on Input (1) Output Power at Decreased Voltage (Pin = 100 mW, VS2 = VS3 = 10.8 Vdc) (1) (1) Adjust Pin for specified Pout. Symbol BW Gp 2fo 3fo VSWRin -- Pout 10 -- (continued) Min 880 35 21.5 -- -- -- Max 915 -- -- - 30 - 35 3:1 6.0 % Watt Unit MHz % dB dBc REV 3 (c)MOTOROLA RF DEVICE DATA Motorola, Inc. 1997 MHW913 1 ELECTRICAL CHARACTERISTICS (continued) (VS2 = VS3 = 12.5 V, Vbias = 4.8 V, TC = 25C, 50 system, unless otherwise noted) Load Mismatch Stress (Vsupply = 15.6 Vdc, Pout = 15 W; Load VSWR = 10:1, All Phase Angles) (1) Stability (Vsupply = 10.8 to 16 Vdc; Pout = 0.03 to 14 W; Load VSWR = 6:1, All Phase Angles) (1) Quiescent Current (With No RF Applied) (VS2 = VS3 = 12.5 Vdc, Vbias = 4.8 Vdc) Leakage Current (Pin = 0 mW, VS2 = VS3 = 12.5 Vdc, Vb = 0 Vdc) Bias Pin Current (Pout = 14 W) (1) Noise Power (In 30 kHz Bandwidth, 20 MHz above fo) (Pout = 0.03 to 14 W, VS2 = VS3 = 10.8 to 15.6 Vdc; Vbias= 4.8 Vdc) (1) (1) Adjust Pin for specified Pout. -- -- Isq -- IL Ibias -- -- -- -- 500 0.6 0.8 -70 mA mA dBm No degradation in output power All spurious outputs more than 60 dB below desired signal mA MHW913 BLOCK DIAGRAM OUTPUT POWER METER INPUT POWER METER REFLECTED POWER METER SPECTRUM ANALYZER 1 2 C4 C1 Z1 TEST FIXTURE C5 C7 C8 3 4 C6 C2 C3 C9 5 Z2 RF IN 20 dB DUAL DIRECTIONAL COUPLER Vbias 4.8 V VS2 12.5 V VS3 12.5 V RF OUT 20 dB DUAL DIRECTIONAL COUPLER 10 dB MINIMUM ATTENUATION RF SIGNAL GENERATOR POWER TERMINATION C1, C2, C3 C4, C5, C6 C7, C8, C9 Z1, Z2 0.018 F 0.1 F 1.0 F 50 Microstrip Figure 1. MHW913 Test Circuit Diagram MHW913 2 MOTOROLA RF DEVICE DATA Typical Characteristics 25 25 VS2 = VS3 = 12.5 Vdc Pout , OUTPUT POWER (W) 902 MHz 15 f = 880 MHz 10 915 MHz 5 Vbias = 4.8 Vdc VS2 = VS3 = 12.5 Vdc 0 0 2 4 6 8 12 10 14 Pin, INPUT POWER (dBm) 16 18 20 Pout , OUTPUT POWER (W) 20 20 10.8 Vdc 15 10 5 0 880 Pin = 100 mW Vbias = 4.8 Vdc 885 890 900 895 f, Frequency (MHz) 905 910 915 Figure 2. Output Power versus Input Power Figure 3. Output Power versus Frequency 20 18 Pout , OUTPUT POWER (W) 16 14 12 10 8 6 4 2 0 10 11 Vbias = 4.8 Vdc Pin set for 14 W @ 12.5 Vdc 12.5 13 14 VS2 = VS3, SUPPLY VOLTAGE (V) 15 16 f = 880 MHz 60 50 915 MHz Pin , OUTPUT POWER (mW) 40 30 20 10 0 - 30 - 20 -10 f = 880 MHz 915 MHz Pout = 14 W VS2 = VS3 = 12.5 Vdc Vbias = 4.8 Vdc 0 10 20 30 40 50 60 70 TC, CASE TEMPERATURE (C) 80 90 100 Figure 4. Output Power versus Supply Voltage Figure 5. Input Power versus Case Temperature for Pout = 14 W 30 25 Pout , OUTPUT POWER (W) 20 15 10 5 0 - 30 - 20 -10 Pin = 100 mW VS2 = VS3 = 12.5 Vdc Vbias = 4.8 Vdc 0 10 20 30 40 50 60 70 TC, CASE TEMPERATURE (C) 80 90 100 f = 880 MHz 915 MHz Figure 6. Output Power versus Case Temperature for Maximum Input Power MOTOROLA RF DEVICE DATA MHW913 3 PACKAGE DIMENSIONS -A- Y G -B- 0.89 (0.035) M TA M NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION F TO CENTER OF LEADS. 4. REF INDICATES NON-CONTROLLED DIMENSION FOR REFERENCE USE ONLY. INCHES MIN MAX 1.890 1.910 1.170 1.190 0.350 0.376 0.018 0.022 0.120 0.135 0.165 BSC 1.600 BSC 1.055 BSC 0.336 0.360 0.225 --- 0.255 BSC 0.955 BSC 0.008 0.012 0.151 0.161 0.685 0.705 0.598 0.612 0.155 BSC 0.355 BSC 0.210 REF MILLIMETERS MIN MAX 48.01 48.51 29.72 30.23 8.89 9.55 0.46 0.56 3.05 3.43 4.19 BSC 40.64 BSC 26.80 BSC 8.53 9.14 5.72 --- 6.48 BSC 24.26 BSC 0.20 0.31 3.84 4.09 17.40 17.91 15.19 15.55 3.94 BSC 9.02 BSC 5.33 REF R J K 12 345 -S- Q 2 PL 0.50 (0.020) M TS N H V L W 0.25 (0.010) M TS M A M D 5 PL 0.64 (0.025) M TB DIM A B C D E F G H J K L N P Q R S V W Y E -T- SEATING PLANE F C P 5 PL 0.25 (0.010) M STYLE 1: PIN 1. 2. 3. 4. 5. CASE: RF INPUT +DC (BIAS) +DC (SUPPLY) +DC (SUPPLY) RF OUTPUT GROUND T CASE 301AB- 02 ISSUE G Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 303-675-2140 or 1-800-441-2447 JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. 81-3-5487-8488 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 INTERNET: http://motorola.com/sps MHW913 4 MHW913/D MOTOROLA RF DEVICE DATA |
Price & Availability of MHW913
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |