 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| INTEGRATED CIRCUITS 74LVC827A 10-bit buffer/line driver with 5-volt tolerant inputs/outputs (3-State) Poduct specification 1998 Sep 04 Philips Semiconductors Philips Semiconductors Product specification 10-bit buffer/line driver with 5-volt tolerant inputs/outputs (3-State) 74LVC827A FEATURES * 5-volt tolerant inputs/outputs, for interfacing with 5-volt logic * Supply voltage range of 2.7V to 3.6V * Complies with JEDEC standard no. 8-1A * CMOS low power consumption * Direct interface with TTL levels * High impedance when VCC = 0V DESCRIPTION The 74LVC827A is a high performance, low-power, low-voltage Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3V or 5.0V devices. In 3-state operation, outputs can handle 5V. This feature allows the use of these devices as translators in a mixed 3.3V/5V environment. The 74LVC827A is a10-bit buffer/line driver with 3-State outputs The 3-State outputs are controlled by the output enable inputs OE1 and OE2. A HIGH on OEn causes the outputs to assume a high impedance OFF-state. QUICK REFERENCE DATA GND = 0 V; Tamb = 25C; tr = tf 2.5 ns SYMBOL tPHL/tPLH CI CPD PARAMETER Propagation delay An to Yn Input capacitance Power dissipation capacitance per buffer Notes 1 and 2 CONDITIONS CL = 50 pF; VCC = 3.3 V TYPICAL 4 5.0 24 UNIT ns pF pF NOTES: 1. CPD is used to determine the dynamic power dissipation (PD in W) PD = CPD x VCC2 x fi ) (CL x VCC2 x fo) where: fi = input frequency in MHz; CL = output load capacity in pF; fo = output frequency in MHz; VCC = supply voltage in V; (CL x VCC2 x fo) = sum of the outputs. 2. The condition is VI = GND to VCC ORDERING INFORMATION PACKAGES 24-Pin Plastic SO 24-Pin Plastic SSOP Type II 24-Pin Plastic TSSOP Type I TEMPERATURE RANGE -40C to +85C -40C to +85C -40C to +85C OUTSIDE NORTH AMERICA 74LVC827A D 74LVC827A DB 74LVC827A PW NORTH AMERICA 74LVC827A D 74LVC827A DB 7LVC827APW DH PKG. DWG. # SOT137-1 SOT340-1 SOT355-1 PIN DESCRIPTION PIN NUMBER 1, 13 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 12 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 24 SYMBOL OE1, OE2 A0 to A9 GND Y0 to Y9 VCC NAME AND FUNCTION Output enable input (active LOW) Data inputs Ground (0 V) Bus outputs Positive supply voltage FUNCTION TABLE INPUTS OE1 L L X H H L X Z OE2 L L H X An L H X X OUTPUTS Yn L H Z Z = HIGH voltage level = LOW voltage level = Don't care = high impedance OFF-state 1998 Sep 04 2 853-2117 19969 Philips Semiconductors Product specification 10-bit buffer/line driver with 5-volt tolerant inputs/outputs (3-State) 74LVC827A PIN CONFIGURATION LOGIC SYMBOL 2 OE 1 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 GND 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 V CC Y0 Y1 Y2 Y3 5 Y4 Y5 Y6 Y7 Y8 8 Y9 OE 2 9 7 6 4 3 A0 Y0 23 A1 Y1 22 A2 Y2 21 A3 Y3 20 A4 Y4 19 A5 Y5 18 A6 Y6 17 A7 Y7 16 SA00426 10 A8 Y8 15 LOGIC SYMBOL (IEEE/IEC) 11 A9 Y9 14 1 1 13 & EN 13 OE 1 OE 2 SA00427 2 23 22 21 20 19 18 17 16 15 14 3 4 5 6 7 8 9 10 11 SA00428 1998 Sep 04 3 Philips Semiconductors Product specification 10-bit buffer/line driver with 5-volt tolerant inputs/outputs (3-State) 74LVC827A FUNCTIONAL DIAGRAM 2 A0 Y0 23 3 A1 Y1 22 4 A2 Y2 21 5 A3 Y3 20 6 A4 Y4 19 7 A5 Y5 18 8 A6 Y6 17 9 A7 Y7 16 10 A8 Y8 15 11 A9 Y9 14 1 13 OE 1 OE 2 SA00429 RECOMMENDED OPERATING CONDITIONS LIMITS SYMBOL PARAMETER DC supply voltage (for max. speed performance) VCC VI VO Tamb tr, tf DC supply voltage (for low-voltage applications) DC Input voltage range DC output voltage range; output HIGH or LOW state DC output voltage range; output 3-State Operating ambient temperature range in free-air Input rise and fall times VCC = 1.2 to 2.7V VCC = 2.7 to 3.6V CONDITIONS MIN 2.7 1.2 0 0 0 -40 0 0 MAX 3.6 V 3.6 5.5 VCC 5.5 +85 20 10 C ns/V V V UNIT 1998 Sep 04 4 Philips Semiconductors Product specification 10-bit buffer/line driver with 5-volt tolerant inputs/outputs (3-State) 74LVC827A ABSOLUTE MAXIMUM RATINGS1 In accordance with the Absolute Maximum Rating System (IEC 134) Voltages are referenced to GND (ground = 0V) SYMBOL VCC IIK VI IOK VO IO IGND, ICC Tstg PTOT PARAMETER DC supply voltage DC input diode current DC input voltage DC output diode current DC output voltage; output HIGH or LOW state DC output voltage; output 3-State DC output source or sink current DC VCC or GND current Storage temperature range Power dissipation per package - plastic mini-pack (SO) - plastic shrink mini-pack (SSOP and TSSOP) above +70C derate linearly with 8 mW/K above +60C derate linearly with 5.5 mW/K VI t0 Note 2 VO uVCC or VO t 0 Note 2 Note 2 VO = 0 to VCC CONDITIONS RATING -0.5 to +6.5 -50 -0.5 to +6.5 "50 -0.5 to VCC +0.5 -0.5 to 6.5 "50 "100 -65 to +150 500 500 UNIT V mA V mA V mA mA C mW NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. DC ELECTRICAL CHARACTERISTICS Over recommended operating conditions voltages are referenced to GND (ground = 0V) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40C to +85C MIN VIH HIGH level Input voltage VCC = 1.2V VCC = 2.7 to 3.6V LOW level Input voltage VCC = 1.2V VCC = 2.7 to 3.6V VCC = 2.7V; VI = VIH or VIL; IO = -12mA VO OH HIGH level output voltage VCC = 3.0V; VI = VIH or VIL; IO = -100A VCC = 3.0V; VI = VIH or VIL; IO = -18mA VCC = 3.0V; VI = VIH or VIL; IO = -24mA VCC = 2.7V; VI = VIH or VIL; IO = 12mA VOL LOW level output voltage VCC = 3.0V; VI = VIH or VIL; IO = 100A VCC = 3.0V; VI = VIH or VIL; IO = 24mA NOTES: 1. All typical values are at VCC = 3.3V and Tamb = 25C. 2. The specified overdrive current at the data input forces the data input to the opposite logic input state. VCC*0.5 VCC*0.2 VCC*0.6 VCC*0.8 0.40 0.20 0.55 V VCC V VCC 2.0 GND V 0.8 TYP1 MAX V UNIT VIL 1998 Sep 04 5 Philips Semiconductors Product specification 10-bit buffer/line driver with 5-volt tolerant inputs/outputs (3-State) 74LVC827A DC ELECTRICAL CHARACTERISTICS (Continued) Over recommended operating conditions voltages are referenced to GND (ground = 0V) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40C to +85C MIN II IOZ Ioff ICC ICC Input leakage current 3-State output OFF-state current Power off leakage supply Quiescent supply current Additional quiescent supply current per input pin VCC = 3 6V; VI = 5 5V or GND 3.6V; 5.5V Not for I/O pins TYP1 "0.1 "0 1 0.1 0.1 0.1 5 MAX "5 "5 "10 10 500 A A A A A UNIT VCC = 3.6V; VI = VIH or VIL; VO = 5.5V or GND VCC = 0.0V; VI or VO = 5.5V VCC = 3.6V; VI = VCC or GND; IO = 0 VCC = 2.7V to 3.6V; VI = VCC -0.6V; IO = 0 NOTES: 1. All typical values are at VCC = 3.3V and Tamb = 25C. 2. The specified overdrive current at the data input forces the data input to the opposite logic input state. AC CHARACTERISTICS GND = 0V; tr = tf v 2.5ns; CL = 50pF; RL = 500; Tamb = -40C to +85C. LIMITS SYMBOL PARAMETER Propagation delay 1An to 1Yn; 2An to 2Yn 3-State output enable time OE1 to 1Yn; OE2 to 2Yn 3-State output disable time OE1 to 1Yn; OE2 to 2Yn WAVEFORM VCC = 3.3V 0.3V MIN tPHL tPLH tPZH tPZL tPHZ tPLZ Figures 1, 3 1.5 TYP1 4.0 MAX 6.7 VCC = 2.7V MIN 1.5 MAX 7.1 VCC = 1.2V TYP 15 ns UNIT Figures 2, 3 1.5 5.4 8.5 1.5 9.5 25 ns Figures 2, 3 1.5 4.0 6.7 1.5 7.3 11 ns NOTE: 1. Unless otherwise stated, all typical values are at VCC = 3.3V and Tamb = 25C. AC WAVEFORMS VM = 1.5V at VCC w 2.7V; VM = 0.5 VCC at VCC t 2.7V. VOL and VOH are the typical output voltage drop that occur with the output load. VX = VOL + 0.3V at VCC w 2.7V; VX = VOL + 0.1 VCC at VCC t 2.7V VY = VOH -0.3V at VCC w 2.7V; VY = VOH - 0.1 VCC at VCC t 2.7V VI OE n INPUT GND VM VI An INPUT GND t PHL V OH Yn OUTPUT V OL VM t PLH VM V CC OUTPUT LOW-to-OFF OFF-to-LOW VOL tPLZ tPZL VM VX tPHZ tPZH VOH OUTPUT HIGH-to-OFF OFF-to-HIGH GND outputs enabled VY VM outputs disabled outputs enabled SA00430 SA00431 Figure 2. 3-State enable and disable times. Figure 1. The input (An) to output (Yn) propagation delays. 1998 Sep 04 6 Philips Semiconductors Product specification 10-bit buffer/line driver with 5-volt tolerant inputs/outputs (3-State) 74LVC827A TEST CIRCUIT VCC S1 2 x VCC Open GND PULSE GENERATOR VI D.U.T. RT VO 500 CL 50pF 500 Test VCC t 2.7V 2.7V - 3.6V VI VCC 2.7V tPLH/tPHL tPLZ/tPZL tPHZ/tPZH S1 Open 2 x VCC GND SY00003 Figure 3. Load circuitry for switching times. 1998 Sep 04 7 Philips Semiconductors Product specification 10-bit buffer/line driver with 5-volt tolerant inputs/outputs (3-State) 74LVC827A SO24: plastic small outline package; 24 leads; body width 7.5 mm SOT137-1 1998 Sep 04 8 Philips Semiconductors Product specification 10-bit buffer/line driver with 5-volt tolerant inputs/outputs (3-State) 74LVC827A SSOP24: plastic shrink small outline package; 24 leads; body width 5.3 mm SOT340-1 1998 Sep 04 9 Philips Semiconductors Product specification 10-bit buffer/line driver with 5-volt tolerant inputs/outputs (3-State) 74LVC827A TSSOP24: plastic thin shrink small outline package; 24 leads; body width 4.4 mm SOT355-1 1998 Sep 04 10 Philips Semiconductors Product specification 10-bit buffer/line driver with 5-volt tolerant inputs/outputs (3-State) 74LVC827A NOTES 1998 Sep 04 11 Philips Semiconductors Product specification 10-bit buffer/line driver with 5-volt tolerant inputs/outputs (3-State) 74LVC827A Data sheet status Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production [1] Please consult the most recently issued datasheet before initiating or completing a design. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Document order number: Date of release: 08-98 9397-750-04521 Philips Semiconductors yyyy mmm dd 12 |
Price & Availability of 74LVC827
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |
