 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VP1304 VP1306 VP1310 P-Channel Enhancement-Mode Vertical DMOS FETs Ordering Information BVDSS / BVDGS -40V -60V -100V RDS(ON) (max) 25 25 25 ID(ON) (min) -0.25A -0.25A -0.25A Order Number / Package TO-92 VP1304N3 VP1306N3 VP1310N3 Features Free from secondary breakdown Low power drive requirement Ease of paralleling Low CISS and fast switching speeds Excellent thermal stability Integral Source-Drain diode High input impedance and high gain Complementary N- and P-channel devices Advanced DMOS Technology These enhancement-mode (normally-off) transistors utilize a vertical DMOS structure and Supertex's well-proven silicon-gate manufacturing process. This combination produces devices with the power handling capabilities of bipolar transistors and with the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, these devices are free from thermal runaway and thermally-induced secondary breakdown. Supertex's vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired. 9 Applications Motor controls Converters Amplifiers Switches Power supply circuits Drivers (relays, hammers, solenoids, lamps, memories, displays, bipolar transistors, etc.) Package Options Absolute Maximum Ratings Drain-to-Source Voltage Drain-to-Gate Voltage Gate-to-Source Voltage Operating and Storage Temperature Soldering Temperature* * Distance of 1.6 mm from case for 10 seconds. SGD BVDSS BVDGS 20V -55C to +150C 300C TO-92 Note: See Package Outline section for dimensions. 7-251 VP1304/VP1306/VP1310 Thermal Characteristics Package TO-92 ID (continuous)* -0.15A TA = 25C ID (pulsed) -0.65A Power Dissipation @ TC = 25C 1.0W C/W 125 jc C/W 170 ja IDR* -0.15A IDRM -0.65A * ID (continuous) is limited by max rated Tj. Electrical Characteristics (@ 25C unless otherwise specified) Symbol BVDSS Parameter VP1310 Drain-to-Source Breakdown Voltage Gate Threshold Voltage Change in VGS(th) with Temperature Gate Body Leakage Zero Gate Voltage Drain Current VP1306 VP1304 VGS(th) V GS(th) IGSS IDSS Min -100 -60 -40 -1.5 -3.2 -0.1 -3.5 -3.85 -100 -10 -500 ID(ON) RDS(ON) RDS(ON) GFS CISS COSS CRSS td(ON) tr td(OFF) tf VSD trr ON-State Drain Current -0.08 -0.25 Static Drain-to-Source ON-State Resistance Change in RDS(ON) with Temperature Forward Transconductance Input Capacitance Common Source Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Diode Forward Voltage Drop Reverse Recovery Time 75 -0.23 -0.7 32 19 0.8 120 20 12 3 3 3 3 3 -1.2 350 35 15 5 5 5 5 8 -1.7 V ns ISD = -0.25A, VGS = 0V ISD = -0.25A, VGS = 0V ns VDD = -25V ID = -250mA RGEN = 25 pF VGS = 0V, VDS = -25V f = 1 MHz 40 25 1.1 %/C m A A V mV/C nA VGS = VDS, ID = -1mA VGS = VDS, ID = -1mA VGS = 20V, VDS = 0V VGS = 0V, VDS = Max Rating VGS = 0V, VDS = 0.8 Max Rating TA = 125C VGS = -5V, VDS = -25V VGS = -10V, VDS = -25V VGS = -5V, ID = -50mA VGS = -10V, ID = -250mA VGS = -10V, ID = -250mA VDS = -25V, ID = -200mA V ID = -1mA, VGS = 0V Typ Max Unit Conditions Notes: 1. All D.C. parameters 100% tested at 25C unless otherwise stated. (Pulse test: 300s pulse, 2% duty cycle.) 2. All A.C. parameters sample tested. Switching Waveforms and Test Circuit 0V INPUT -10V t(ON) td(ON) 0V 90% OUTPUT VDD 10% 10% VDD 90% tr 90% t(OFF) td(OFF) tF INPUT RL D.U.T. OUTPUT 10% PULSE GENERATOR Rgen 7-252 VP1304/VP1306/VP1310 Typical Performance Curves Output Characteristics -1.0 -0.5 VGS = -10V -0.8 VGS = -10V -0.4 Saturation Characteristics -8V ID (amperes) ID (amperes) -0.6 -8V -0.3 -6V -0.4 -0.2 -6V -0.2 -0.1 -4V -3V -4V -3V 0 0 -10 -20 -30 -40 -50 0 0 -2 -4 -6 -8 -10 VDS (volts) Transconductance vs. Drain Current 0.2 2.5 VDS (volts) Power Dissipation vs. Ambient Temperature VDS = -25V 2.0 TA= -55C 9 GFS (siemens) 0.1 PD (watts) TA = 25C 1.5 TA = 125C 1.0 0.5 TO-92 0 0 -0.2 -0.4 -0.6 -0.8 -1.0 0 0 25 50 75 100 125 150 ID (amperes) Maximum Rated Safe Operating Area -10 1.0 TC (C) Thermal Response Characteristics ID (amperes) -1.0 TO-92 (pulsed) Thermal Resistance (normalized) 0.5 TO-92 (DC) -0.1 TO-92 P D = 1W T C = 25C 0 0.001 0.01 0.1 1.0 10 TA = 25C -0.01 -0.1 -1.0 -10 -100 VDS (volts) tp (seconds) 7-253 VP1304/VP1306/VP1310 Typical Performance Curves BVDSS Variation with Temperature 100 1.1 80 On-Resistance vs. Drain Current VGS = -5V BVDSS (normalized) RDS(ON) (ohms) 60 VGS = -10V 1.0 40 20 0.9 0 -50 0 50 100 150 0 -0.2 -0.4 -0.6 -0.8 -1.0 Tj (C) Transfer Characteristics -1.0 ID (amperes) V(th) and RDS Variation with Temperature 2.0 VDS = -25V -0.8 1.2 RDS(ON) @ -10V, -0.25A 1.6 TA = -55C VGS(th) (normalized) 1.1 1.2 1.0 0.8 0.9 0.4 0.8 ID (amperes) 25C -0.6 125C -0.4 -0.2 V(th) @ -1mA 0 0 0 -2 -4 -6 -8 -10 -50 0 50 100 150 VGS (volts) Capacitance vs. Drain-to-Source Voltage 40 -10 Tj (C) Gate Drive Dynamic Characteristics f = 1MHz -8 30 VDS = -10V C (picofarads) VGS (volts) -6 20 CISS VDS = -40V -4 40 pF 10 COSS -2 CRSS 0 0 -10 -20 -30 -40 0 0 25 pF 0.2 0.3 0.1 0.4 0.5 VDS (volts) QG (nanocoulombs) 7-254 RDS(ON) (normalized) |
Price & Availability of VP1310N3
 |
|
|
|
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |