![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
AN6701S Temperature Sensor IC s Overview The AN6701S is an integrated circuit designed for temperature sensing. Since a temperature characteristic adjusting circuit and buffer amp. in addition to temperature sensor circuit are integrated, the temperature sensing operation with high sensitivity as well as high precision can easily be done by a single external resistor. 0.40.25 Unit : mm 0.60.3 1 2 3 4 8 7 6 5 5.00.3 0.15 0.65 1.50.2 s Features * High sensitivity (100mV/C) * Excellent linearity (non linearity.0.5%) * Easy calibration with an external resistor * High precision (1C) with calibration 0.10.1 1.27 0.3 4.20.3 6.50.3 8-pin PANAFLAT Plastic Package (SOP008-P-0225A) s Pin Descriptions Pin No. 1 2 3 4 5 6 7 8 VCC Output voltage GND RC NC NC NC NC Pin name s Block Diagram 1 VCC Temperature Detecter + - Offset Temp. Adjuster Buffer Amp. 2 VO 4 RC 3 GND s Absolute Maximum Ratings (Ta=25C) Parameter Supply voltage Supply current Power dissipation Operating ambient temperature Storage temperature Symbol VCC ICC PD Topr Tstg Rating 16 4 70 -10 to + 80 -55 to +125 Unit V mA mW C C s Typical Characteristics Parameter Applicable temperature Sensitivity (RC=1 to 100k) Non-linearity Offset temperature (RC=1 to 100k) Thermal constant (during quiescent airing) Thermal constant (during spray airing) Thermal resistance (during quiescent airing) Value -10 to + 80 104 to 112 0.5 -30 to -10 24 11 300 Unit C mV/C % C s s C/W Note) Offset temperature is a temperature in which output becomes "0" when input/output characteristics are inserted externally. s Electrical Characteristics (Ta=-10C -- +80C) Parameter Supply voltage Supply current Symbol VCC ICC Condition RC=10k, RL= VCC=15V, RC=10k, RL=, Ta=25C Not calibrated 1), VCC=15V, Ta=0C Not calibrated 1), VCC=15V, Ta=25C Not calibrated 1), VCC=15V, Ta=80C Calibrated 2), VCC=15V, Ta=-10C Calibrated 2), VCC=15V, Ta=60C Calibrated 2), VCC=15V, Ta=80C RC=10k, Ta=0C, VCC=5 to 15V Not calibrated 1), VCC=15V, Ta=0 to 80C RC=10k, VCC=9V, Ta=25C, DVO=50mV min 5 0.2 1.3 4 10 1.1 8.6 10.8 typ 9 0.4 2.3 5 11 1.2 8.8 11 0.15 0.5 100 30 200 max 15 0.8 3.3 6 12 1.4 9 11.2 0.22 2 Unit V mA V V V V V V V % A Output voltage VO Supply voltage fluctuate due to output change Non-linearity Output current Output resistance DVOV NL IO RO Note1) RC=10k Note2) Adjust RC value to be VO=5.0V when Ta=25C s Characteristics Curve ICC -Ta 1000 VCC =15V RC =10k 800 Ta =25C 14 ICC -VCC 16 VO -Ta VCC =15V RC =100k Supply Current ICC (A) Supply Current ICC (A) 800 600 Output Voltage VO (V) RC = 1k 10k 12 10k 10 8 6 4 2 1k 600 400 400 200 200 0 -20 0 20 40 60 80 0 4 6 8 10 12 14 16 0 -20 0 20 40 60 80 100 Ambient Temperature Ta (C) Supply Voltage VCC (V) Ambient Temperature Ta (C) VO -VCC 12 (Calibrated) 10 Ta=80C 114 S - Toffset 100 70 50 30 20 10 5 3 2 VCC =12V DTa=55C 16 102 -35 1 -30 -25 -20 -15 -10 -5 0 10 DVO - t T=24s (during quiescent airing) Output Voltage VO (V) 60C 8 40C 6 20C 4 0C 2 -10C 0 110 108 Output Change Rate DVO (%) 112 Sensitivity S (mV/C) 106 T=11s (during spray airing) 104 4 6 8 10 12 14 20 30 40 50 Supply Voltage VCC (V) Offset Temperature Toffset (C) Time t (s) s Application Circuit 5 to 15V 1 2 110mV/C 1 2 110mV/C AN6701S 4 3 RC AN6701S 4 3 RC -5 to+15V (a) When positive power supply is used. (b) When negative power supply is used. 5 to 15V 1 10k 2 100k 4 RC 100k - AN6701S 3 + 110mV/C 10k (c) When output polarity is inverted. Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of AN6701S
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |