 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Not Recommended for New Designs Advance Product Information September 9, 2001 TriQuint Recommends the TGA4509-EPU be used for New Designs 27- 32 GHz Ka Band HPA Key Features * * * * * * TGA1193-EPU 0.25 um pHEMT Technology 15dB Nominal Gain at 30GHz 31.5dBm Psat @ 30GHz Typical 37dBm OTOI Typical at 30GHz Bias 7 V @ 1.26A Chip Dimensions 3.14 mm x 2.63 mm Primary Applications * * * Ka Band Sat-Com Ground Terminals Point-to-Point Radio Point-to-Multipoint Hubs Preliminary Measured Results TGA1193 Small Signal Gain 20 18 16 Gain (dB) 14 12 10 8 6 4 2 0 24 25 26 27 28 29 30 31 32 33 34 Frequency (GHz) TGA1193 P1dB 35 P1dB (dBm) 33 31 29 27 25 27 28 29 30 31 32 Frequency (GHz) Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice TriQuint Semiconductor Texas : Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com 1 Not Recommended for New Designs Advance Product Information September 9, 2001 TriQuint Recommends the TGA4509-EPU be used for New Designs TGA1193-EPU TGA1193Typical S-Parameters Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice TriQuint Semiconductor Texas : Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com 2 Not Recommended for New Designs Advance Product Information September 9, 2001 TriQuint Recommends the TGA4509-EPU be used for New Designs TGA1193-EPU Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice TriQuint Semiconductor Texas : Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com 3 Not Recommended for New Designs Advance Product Information September 9, 2001 TriQuint Recommends the TGA4509-EPU be used for New Designs TGA1193-EPU GaAs MMIC devices are susceptible to damage from Electrostatic Discharge. Proper precautions should be observed during handling, assembly and test. Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice TriQuint Semiconductor Texas : Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com 4 Not Recommended for New Designs Advance Product Information September 9, 2001 TriQuint Recommends the TGA4509-EPU be used for New Designs TGA1193-EPU Reflow process assembly notes: * * * * * AuSn (80/20) solder with limited exposure to temperatures at or above 300C alloy station or conveyor furnace with reducing atmosphere no fluxes should be utilized coefficient of thermal expansion matching is critical for long-term reliability storage in dry nitrogen atmosphere Component placement and adhesive attachment assembly notes: * * * * * * * vacuum pencils and/or vacuum collets preferred method of pick up avoidance of air bridges during placement force impact critical during auto placement organic attachment can be used in low-power applications curing should be done in a convection oven; proper exhaust is a safety concern microwave or radiant curing should not be used because of differential heating coefficient of thermal expansion matching is critical Interconnect process assembly notes: * * * * * thermosonic ball bonding is the preferred interconnect technique force, time, and ultrasonics are critical parameters aluminum wire should not be used discrete FET devices with small pad sizes should be bonded with 0.0007-inch wire maximum stage temperature: 200C GaAs MMIC devices are susceptible to damage from Electrostatic Discharge. Proper precautions should be observed during handling, assembly and test. Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice TriQuint Semiconductor Texas : Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com 5 |
Price & Availability of TGA1193-EPU
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |