|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Power Transistors 2SB1179, 2SB1179A Silicon PNP epitaxial planar type darlington For power amplification and switching Complementary to 2SD1749, 2SD1749A Features * High forward current transfer ratio hFE which has satisfactory linearity * High-speed switching * I type package enabling direct soldering of the radiating fin to the printed circuit board, etc. of small electronic equipment 12.60.3 7.20.3 Unit: mm 7.00.3 3.00.2 2.00.2 3.50.2 0 to 0.15 2.50.2 (1.0) (1.0) 1.10.1 1.00.2 Absolute Maximum Ratings TC = 25C Parameter Collector-base voltage (Emitter open) 2SB1179 2SB1179A VCEO VEBO IC ICP PC Tj Tstg Ta = 25C Junction temperature Storage temperature Symbol VCBO Rating -60 -80 -60 -80 -5 -4 -8 15 1.3 150 -55 to +150 C C V A A W V Unit V 0.750.1 0.40.1 2.30.2 4.60.4 1 2 3 0.90.1 0 to 0.15 Collector-emitter voltage 2SB1179 (Base open) 2SB1179A Emitter-base voltage (Collector open) Collector current Peak collector current Collector power dissipation 1: Base 2: Collector 3: Emitter I-G1 Package Note) Self-supported type package is also prepared. Internal Connection C B Electrical Characteristics TC = 25C 3C Parameter Collector-emitter voltage (Base open) Base-emitter voltage Collector-base cutoff current (Emitter open) Collector-emitter cutoff current (Base open) 2SB1179 2SB1179A 2SB1179 2SB1179A IEBO hFE1 hFE2 * Collector-emitter saturation voltage Transition frequency Turn-on time Storage time Fall time VCE(sat) fT ton tstg tf ICEO 2SB1179 2SB1179A VBE ICBO VCE = -3 V, IC = -3 A VCB = -60 V, IE = 0 VCB = -80 V, IE = 0 VCE = -40 V, IB = 0 VCE = -40 V, IB = 0 VEB = -5 V, IC = 0 VCE = -3 V, IC = - 0.5 A VCE = -3 V, IC = -3 A IC = -3 A, IB = -12 mA IC = -5 A, IB = -20 mA VCE = -10 V, IC = - 0.5 A, f = 1 MHz IC = -3 A, IB1 = -12 mA, IB2 = 12 mA VCC = -50 V 20 0.3 2.0 0.5 1 000 2 000 Symbol VCEO Conditions IC = -30 mA, IB = 0 Min -60 -80 Typ E Max Unit V -2.5 -200 -200 -500 -500 -2 10 000 -2 -4 MHz s s s V mA A V A Emitter-base cutoff current (Collector open) Forward current transfer ratio Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *: Rank classification Rank Q P hFE2 Publication date: February 2003 2 000 to 5 000 4 000 to 10 000 SJD00055AED 2.50.2 1 2SB1179, 2SB1179A PC Ta 20 -6 (1)TC=Ta (2)Without heat sink (PC=1.3W) IC VCE -10 TC=25C IB=-3.0mA -2.5mA -2.0mA -1.5mA -1.0mA -0.5mA IC VBE VCE=-3V Collector power dissipation PC (W) -5 Collector current IC (A) -4 Collector current IC (A) 15 -8 -6 TC=100C 10 (1) -3 25C -25C -0.4mA -0.3mA -0.2mA -4 -2 5 -1 (2) 0 0 40 80 120 160 0 0 -1 -2 -3 -4 -5 -2 0 0 - 0.8 -1.6 -2.4 -3.2 Ambient temperature Ta (C) Collector-emitter voltage VCE (V) Base-emitter voltage VBE (V) VCE(sat) IC Collector-emitter saturation voltage VCE(sat) (V) -100 IC/IB=250 hFE IC VCE=-3V Cob VCB Collector output capacitance C (pF) (Common base, input open circuited) ob 104 IE=0 f=1MHz TC=25C 106 -10 TC=100C 25C Forward current transfer ratio hFE 105 103 TC=100C 25C -1 -25C 104 -25C 102 - 0.1 103 10 - 0.01 - 0.01 - 0.1 -1 -10 102 - 0.01 - 0.1 -1 -10 1 - 0.1 -1 -10 -100 Collector current IC (A) Collector current IC (A) Collector-base voltage VCB (V) Safe operation area -100 Non repetitive pulse TC=25C Rth t 103 (1)Without heat sink (2)With a 50x50x2mm Al heat sink Collector current IC (A) -10 ICP IC t=1ms t=10ms t=300ms Thermal resistance Rth (C/W) 102 (1) (2) -1 10 - 0.1 2SB1179A 2SB1179 1 - 0.01 -1 -10 -100 -1 000 10-1 10-4 10-3 10-2 10-1 1 10 102 103 104 Collector-emitter voltage VCE (V) Time t (s) 2 SJD00055AED Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2002 JUL This datasheet has been download from: www..com Datasheets for electronics components. |
Price & Availability of 2SB1179A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |