View 2SK2552_936237.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
JUNCTION FIELD EFFECT TRANSISTOR
2SK2552
N-CHANNEL SILICON JUNCTION FIELD EFFECT TRANSISTOR FOR IMPEDANCE CONVERTER OF ECM
DESCRIPTION
The 2SK2552 is suitable for converter of ECM.
PACKAGE DRAWING (Unit: mm)
0.3 +0.1 -0 0.15 +0.1 -0.05
FEATURES
* Compact package * High forward transfer admittance 1000 S TYP. (IDSS = 100 A) 1600 S TYP. (IDSS = 200 A) * Includes diode and high resistance at G - S
1.6 0.1 0.8 0.1
3 0 to 0.1 2 0.2 0.5
+0.1 -0
1
ORDERING INFORMATION
PART NUMBER 2SK2552 PACKAGE SC-75 (USM)
0.5
0.6 0.75 0.05
1.0 1.6 0.1
1: Source 2: Drain 3: Gate
ABSOLUTE MAXIMUM RATINGS (TA = 25C)
Drain to Source Voltage Note1 Gate to Drain Voltage Drain Current Gate Current Total Power Dissipation Junction Temperature Storage Temperature Notes 1. VGS = -1.0 V 2. Mounted on ceramic substrate of 3.0 cm2 x 0.64 mm Remark
Note2
VDSX VGDO ID IG PT Tj Tstg
20 -20 10 10 200 125 -55 to +125
V V mA mA mW C C
EQUIVALENT CIRCUIT
Drain
Gate
Source
Please take care of ESD (Electro Static Discharge) when you handle the device in this document.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information.
Document No. D15941EJ2V0DS00 (2nd edition) Date Published November 2004 NS CP(K) Printed in Japan
The mark
shows major revised points.
2002
2SK2552
ELECTRICAL CHARACTERISTICS (TA = 25C)
CHARACTERISTICS Zero Gate Voltage Drain Cut-off Current Gate Cut-off Voltage Forward Transfer Admittance Forward Transfer Admittance Input Capacitance Noise Voltage SYMBOL IDSS VGS(off) | yfs1 | | yfs2 | Ciss NV TEST CONDITIONS VDS = 5.0 V, VGS = 0 V VDS = 5.0 V, ID = 1.0 A VDS = 5.0 V, ID = 30 A, f = 1.0 kHz VDS = 5.0 V, VGS = 0 V, f = 1.0 kHz VDS = 5.0 V, VGS = 0 V, f = 1.0 MHz See Test Circuit MIN. 40 -0.1 350 350 7.0 1.8 8.0 3.0 TYP. MAX. 600 -1.0 UNIT
A
V
S S
pF
V
IDSS RANK
MARKING IDSS (A) 40 to 70 60 to 110 90 to 180 150 to 300 200 to 450 300 to 600 J2 J3 J4 J5 J6 J7
NOISE VOLTAGE TEST CIRCUIT
+4.5 V JIS A NV (r.m.s)
R = 1 k
C = 10 pF
2
Data Sheet D15941EJ2V0DS
2SK2552
TYPICAL CHARACTERISTICS (TA = 25C)
DERATING FACTOR OF POWER DISSIPATION
GATE TO SOURCE CURRENT vs. GATE TO SOURCE VOLTAGE 40 30
dT - Derating Factor - %
100 80 60 40 20 0
IG - Gate Current - A
20 10 -1.0 -0.8 -0.6 -0.4 -0.2 -10 -20 -30 -40 0 0.2 0.4 0.6 0.8 1.0
20
40
60
80
100
120 140 160
TA - Ambient Temperature - C
VGS - Gate to Source Voltage - V
DRAIN CURRENT vs. GATE TO SOURCE VOLTAGE 1.0
INPUT CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 100 VDS = 0 V f = 1.0 MHz
VDS = 5 V
ID - Drain Current - mA
IDS IDSS = S = 2 30 0 =1 0 00 0 A A A
0.8
CiSS - Input Capacitance - pF
50 20 10 5
0.6
0.4
0.2
IDS
S
2 1 1 2 5 10 20 50 100
-0.6
-0.4
-0.2
0
+0.2
VGS - Gate to Source Voltage - V
VDS - Drain to Source Voltage - V
VGS (off) - Gate to Source Cut-off Voltage - V |yfs| - Forward Transfer Admittance - S
GATE TO SOURCE CUT-OFF VOLTAGE AND FORWARD TRANSFER ADMITTANCE vs. ZERO-GATE VOLTAGE DRAIN CURRENT CO-RELATION 10.0 5.0 2.0 1.0 0.5 0.2 0.1 0.05 0.02 0.01 10 20 50 100 200 500 1000 Zero-Gate Voltage Drain Current - A VGS (off) |yfs| VDS = 5 V
Data Sheet D15941EJ2V0DS
3
2SK2552
DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE 250 RANK: J2 0.15 V 300
DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE RANK: J3 0.15 V
ID - Drain Current - A
ID - Drain Current - A
200 0.10 V 150 100 50 0 0.05 V VGS = 0 V -0.05 V -0.10 V 0 2 4 6 -0.15 V 8 10
240 0.10 V 180 120 60 0 0.05 V VGS = 0 V -0.05 V -0.10 V 0 2 4 6 -0.15 V 8 10
VDS - Drain to Source Voltage - V
VDS - Drain to Source Voltage - V
DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE 400 RANK: J4 0.15 V
500
DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE RANK: J5 0.15 V 0.10 V
ID - Drain Current - A
ID - Drain Current - A
320 240 160 80 0
0.10 V
400 300 200 100 0
0.05 V VGS = 0 V -0.05 V -0.10 V 0 2 4 6 -0.15 V 8 10
0.05 V VGS = 0 V -0.05 V -0.10 V -0.15 V 6
0
2
4
8
10
VDS - Drain to Source Voltage - V
VDS - Drain to Source Voltage - V
DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE 700 RANK: J6 0.15 V 0.10 V 0.05 V VGS = 0 V 280 140 0 -0.05 V -0.10 V -0.15 V 0 2 4 6 8 10
DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE 900 RANK: J7 0.15 V 0.10 V 0.05 V 540 VGS = 0 V 360 180 -0.15 V 0 0 2 4 6 8 10 -0.05 V -0.10 V
ID - Drain Current - A
420
VDS - Drain to Source Voltage - V
ID - Drain Current - A
560
720
VDS - Drain to Source Voltage - V
4
Data Sheet D15941EJ2V0DS
2SK2552
* The information in this document is current as of November, 2004. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above).
M8E 02. 11-1
This datasheet has been download from: www..com Datasheets for electronics components.

▲Up To Search▲

Price & Availability of 2SK2552

	To Download 2SK2552 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .