|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
2N3903 Discrete POWER & Signal Technologies 2N3903 C BE TO-92 NPN General Purpose Amplifier This device is designed for use as general purpose amplifiers and switches requiring collector currents to 100 mA. Sourced from Process 23. See 2N3904 for characteristics. Absolute Maximum Ratings* Symbol VCEO VCBO VEBO IC TJ, Tstg Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous TA = 25C unless otherwise noted Parameter Value 40 60 6.0 200 -55 to +150 Units V V V mA C Operating and Storage Junction Temperature Range *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol PD RJC RJA TA = 25C unless otherwise noted Characteristic Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Max 2N3903 625 5.0 83.3 200 Units mW mW/C C/W C/W (c) 1997 Fairchild Semiconductor Corporation 2N3903 NPN General Purpose Amplifier (continued) Electrical Characteristics Symbol Parameter TA = 25C unless otherwise noted Test Conditions Min Max Units OFF CHARACTERISTICS V(BR)CEO V(BR)CBO V(BR)EBO Collector-Emitter Breakdown Voltage* Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current Base Cutoff Current I C = 1.0 mA, IB = 0 I C = 10 A, I E = 0 I E = 10 A, IC = 0 VCE = 30 V, VOB = 3.0 V VCE = 30 V, VOB = 3.0 V 40 60 6.0 50 50 V V V nA nA z ICEX IBL ON CHARACTERISTICS* hFE DC Current Gain VCE = 1.0 V, IC = 0.1 mA VCE = 1.0 V, IC = 1.0 mA VCE = 1.0 V, IC = 10 mA VCE = 1.0 V, IC = 50 mA VCE = 1.0 V, IC = 100 mA IC = 10 mA, IB = 1.0 mA IC = 50 mA, IB = 5.0 mA IC = 10 mA, IB = 1.0 mA IC = 50 mA, IB = 5.0 mA 20 35 50 30 15 150 VCE(sat) VBE(sat) Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage 0.65 0.2 0.3 0.85 0.95 V V V V SMALL SIGNAL CHARACTERISTICS Cob Cib hfe hfe hie hre hoe NF Output Capacitance Input Capacitance Small-Signal Current Gain Small-Signal Current Gain Input Impedance Voltage Feedback Ratio Output Admittance Noise Figure VCE = 5.0 V, IC = 100 A, RS = 1.0 k, BW = 10 Hz to 15.7 kHz VCB = 5.0 V, f = 100 kHz VEB = 0.5 V, f = 100 kHz IC = 10 mA, VCE = 20 V, f = 100 MHz VCE = 10 V, IC = 1.0 mA f = 1.0 kHz 2.5 50 1.0 0.1 1.0 200 8.0 5.0 40 6.0 k x 10 mhos dB -4 4.0 8.0 pF pF SWITCHING CHARACTERISTICS td tr ts tf Delay Time Rise Time Storage Time Fall Time VCC = 3.0 V, IC = 10 mA, I B1 = 1.0 mA , Vob ( off ) = 0.5 V VCC = 3.0 V, IC = 10 mA I B1 = IB2 = 1.0 mA 35 35 175 50 ns ns ns ns *Pulse Test: Pulse Width 300 s, Duty Cycle 2.0% |
Price & Availability of 2N3903 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |