View 2SA914_1194979.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Power Transistors
2SA0914 (2SA914)
Silicon PNP epitaxial planar type
Unit: mm
For audio system/pli drive Complementary to 2SC1953 Features
* A complementary pair with 2SC1953, is optimum for the predriver stage of a 60 W to 100 W output amplifier * TO-126B package which requires no insulation plate for installation to the heat sink
8.0+0.5 -0.1 3.160.1
3.80.3 11.00.5
3.20.2
1.90.1
Absolute Maximum Ratings TC = 25C
Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Emitter-base voltage (Collector open) Collector current Peak collector current Collector power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Rating -150 -150 -5 -50 -100 1.2 150 -55 to +150 Unit V V V mA mA W C C
0.750.1 4.60.2
0.50.1 0.50.1 2.30.2 3 1.760.1
1
2
Electrical Characteristics Ta = 25C 3C
Parameter Collector-emitter voltage (Base open) Emitter-base voltage (Collector open) Collector-base cutoff current (Emitter open) Forward current transfer ratio * Collector-emitter saturation voltage Transition frequency Collector output capacitance (Common base, input open circuited) Symbol VCEO VEBO ICBO hFE VCE(sat) fT Cob Conditions IC = -100 A, IB = 0 IE = -10 A, IC = 0 VCB = -100 V, IE = 0 VCE = -5 V, IC = -10 mA IC = -30 mA, IB = -3 mA VCB = -10 V, IE = 10 mA, f = 200 MHz VCB = -6 V, IE = 0, f = 1 MHz 70 5 130 Min -150 -5 -1 330 -1 Typ Max Unit V V A V MHz pF
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *: Rank classification Rank hFE R 130 to 220 S 185 to 330
Note) The part number in the parenthesis shows conventional part number.
Publication date: December 2003 SJD00005CED
16.01.0
1: Emitter 2: Collector 3: Base TO-126B-A1 Package
3.050.1
1
2SA0914
PC Ta
1.6
-80 -450 A -400 A -350 A -300 A -250 A -40 TC = 25C IB = -500 A
IC VCE
-120
IC VBE
VCE = -5 V 25C TC = 100C -25C
Collector power dissipation PC (W)
-100
Collector current IC (mA)
1.2
Collector current IC (mA)
-60
-80
0.8
-200 A -150 A
-60
-40
0.4
-20
-100 A -50 A
-20
0
0
40
80
120
160
0
0
-2
-4
-6
-8
-10
-12
0
0
- 0.4
- 0.8
-1.2
-1.6
-2.0
Ambient temperature Ta (C)
Collector-emitter voltage VCE (V)
Base-emitter voltage VBE (V)
VCE(sat) IC
Collector-emitter saturation voltage VCE(sat) (V)
-100 IC / IB = 10 600
hFE IC
VCE = -5 V
300
fT I E
VCB = -10 V f = 100 MHz TC = 25C
Forward current transfer ratio hFE
-10
400
TC = 100C
Transition frequency fT (MHz)
-10 -100
500
250
200
-1 25C TC = 100C -25C
300
25C -25C
150
200
100
- 0.1
100
50
- 0.01 - 0.1
-1
-10
-100
0 - 0.1
-1
0
1
10
100
Collector current IC (mA)
Collector current IC (mA)
Emitter current IE (mA)
Cob VCB
Collector output capacitance C (pF) (Common base, input open circuited) ob
6 IE = 0 f = 1 MHz TC = 25C
5
4
3
2
1
0 -1
-10
-100
Collector-base voltage VCB (V)
2
SJD00005CED
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2003 SEP

▲Up To Search▲

Price & Availability of 2SA914

	To Download 2SA914 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .