View 2STW1695_1198916.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2STW1695
High power PNP epitaxial planar bipolar transistor
General features

High breakdown voltage VCEO = -140V Complementary to 2STW4468 Typical ft =20MHz Fully characterized at 125 oC In compliance with the 2002/93/EC European Directive
2 1 3
Applications
TO-247
Audio power amplifier
Description
The device is a PNP transistor manufactured using new BiT-LA (Bipolar transistor for linear amplifier) technology. The resulting transistor shows good gain linearity behaviour. Recommended for 70W to 100W high fidelity audio frequency amplifier output stage.
Internal schematic diagram
Order codes
Part Number 2STW1695 Marking 2STW1695 Package TO-247 Packing Tube
February 2007
Rev 3
1/9
www.st.com 9
2STW1695
Electrical ratings
Table 1.
Symbol VCBO VCEO VEBO IC ICM PTOT Tstg TJ
Absolute maximum rating
Parameter Collector-emitter voltage (IE = 0) Collector-emitter voltage (IB = 0) Collector-base voltage (IC = 0) Collector current Collector peak current (tP < 5ms) Total dissipation at Tc = 25C Storage temperature Max. operating junction temperature Value -140 -140 -6 -10 -20 100 -65 to 150 150 Unit V V V A A W C C
Table 2.
Symbol Rthj-case
Thermal data
Parameter Thermal resistance junction-case ________________max Value 1.25 Unit C/W
2/9
2STW1695
Electrical characteristics
1
Electrical characteristics
(TCASE = 25C; unless otherwise specified)
Table 3.
Symbol ICBO IEBO
Electrical characteristics
Parameter Collector cut-off current (IE = 0) Emitter cut-off current (IC = 0) Test Conditions VCB = -140V VEB = -6V IC = -50mA IC = -100A IE = -1mA IC = -5A IC = -7A VCE = -5V IC = -3A IC = -5A IC = -0.5A IE = 0 IC = -5A IB = -500mA IB = -700mA IC = -5A V CE = -4V V CE = -4V V CE = -12V 70 50 20 225 MHz pF s s s -140 -140 -6 -0.5 -0.7 -1.3 140 Min. Typ. Max. -0.1 -0.1 Unit A A V V V V V V
Collector-emitter breakdown V(BR)CEO(1) voltage (I = 0) B V(BR)CBO Collector-emitter breakdown voltage (IE = 0)
Collector-emitter breakdown V(BR)EBO(1) voltage (I = 0) C VCE(sat) (1) VBE (1) hFE fT CCBO ton tstg toff Collector-emitter saturation voltage Base-emitter voltage DC current gain Transition frequency Collector-base capacitance Resistive load Turn-on time Storage time Fall time
VCB = -10V f = 1MHz V CC = -60V
0.24 1.2 0.24
IB1 = -IB2 = -0.5A
Note: 1 Pulsed duration = 300 s, duty cycle 1.5%
3/9
Electrical characteristics
2STW1695
1.1
Figure 1.
Electrical characteristics (curves)
Safe operating area Figure 2. Output characteristics
Figure 3.
DC current gain
Figure 4.
Collector-emitter saturation voltage
Figure 5.
Base-emitter on voltage
Figure 6.
Collector current vs baseemitter voltage
4/9
2STW1695
Electrical characteristics
1.2
Figure 7.
Test circuit
Resistive load switching test circuit
1) Fast electronic switch 2) Non-inductive resistor
5/9
Package mechanical data
2STW1695
2
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
6/9
2STW1695
Package mechanical data
TO-247 MECHANICAL DATA
DIM. MIN. A D E F F3 F4 G H L L3 L4 L5 M 2 15.3 19.7 14.2 34.6 5.5 3 0.079 4.7 2.2 0.4 1 2 3 10.9 15.9 20.3 14.8 0.602 0.776 0.559 1.362 0.217 0.118 mm TYP. MAX. 5.3 2.6 0.8 1.4 2.4 3.4 MIN. 0.185 0.087 0.016 0.039 0.079 0.118 0.429 0.626 0.779 0.582 inch TYP. MAX. 0.209 0.102 0.031 0.055 0.094 0.134
P025P
7/9
Revision history
2STW1695
3
Revision history
Table 4.
Date 23-Oct-2006 09-Feb-2007 20-Feb-2007
Revision history
Revision 1 2 3 First release New graphics The device's commercial code has been changed from preliminary to full. Changes
8/9
2STW1695
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
9/9

▲Up To Search▲

Price & Availability of 2STW1695

	To Download 2STW1695 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .