|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
42118 POSITIVE HIGH TEMPERATURE FIXED VOLTAGE REGULATOR Designed for use in high temperature environments Mii HYBRID MICROELECTRONICS PRODUCTS DIVISION Features: * * * * * Operating temperature +200C Output current to 1.0 A Input voltage to +30 V Internal short circuit protection, foldback and current limiting Isolated TO-258 package Applications: * * Military and Hi Rel Industrial harsh environment applications where hermetically sealed product is required Down hole applications DESCRIPTION The 42118 series of fixed voltage regulators covers the output voltage range from +5 VDC through +30 VDC. These voltage regulators are fabricated using hybrid techniques and will operate at temperatures up to +200C. These devices are complete with internal short circuit protection, which includes voltage shutdown and current foldback. The 42118 series voltage regulators normally do not require any additional components. However, for good design practice, an external filter cap of 2F should be installed at the input, as close to the case as possible. ABSOLUTE MAXIMUM RATINGS AT 200C CASE TEMPERATURE Output Current (IOUT) ............................................................................................................................................................ 1.0 A Input Voltage (VIN) ........................................................................................................................................................ +38 VDC Storage Temperature (TSTG)............................................................................................................................................. +250C Power Dissipation (Pd) ........................................................................................................................................................... 8 W Typical Connection Diagram D1 HEADER RECTIFIED INPUT VIN VOUT REGULATED OUTPUT 2 + AS REQUESTED 2uf COMMON + AS REQUESTED Note: D1 should be installed for input safety. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION * 905 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 08/03/01 42118 POSITIVE HIGH TEMPERATURE, FIXED VOLTAGE REGULATOR ELECTRICAL CHARACTERISTICS PARAMETER *Output voltage *Line regulation Load regulation Ripple rejection at 120 Hz Standby current Short circuit current Short circuit current Foldback current (knee) Foldback current (knee) Noise output Differential voltage ( V= VIN - VOUT ) *VIN = 10V Min TEST CONDITIONS IOUT = 1.0 A VIN = VOUT +3 VDC VIN = (VOUT +3 VDC) to +38 DC IOUT = 50 mA VIN = VOUT +5 VDC IOUT = 0.05 to 1.0 A VIN = VOUT +5 VDC IL= 300 mA VIN = VOUT +5 VDC IOUT = 0 VIN = VOUT +5 VDC VIN = VOUT +5 VDC VIN = VOUT +5 VDC VIN = VOUT +5 VDC VIN = VOUT +5 VDC IOUT = 300 mA IOUT = 300 mA TEMPERATURE +25C to +200C +25C to +200C +25C to +200C +25C +25C +25C +200C +25C +200C +25C +25C to +200C TYPICAL VOUT 1.0% VOUT 0.5% VOUT 0.5% @ 25C 1.0% @ 200C -50 dB 30 mA 400 mA 200 mA 2A 1.5 A 2 mVRMS 3 VDC MIN TYPE TABLE 1 (see note) MAX IOUT (amps) VOUT (volts) 1.0 1.0 1.0 1.0 1.0 1.0 42118-005 5 42118-012 12 42118-015 15 42118-018 18 42118-024 24 42118-030 30 NOTE: Under condition (VIN - VOUT) x lOUT 8 watts at 200C Option: 1) Other output voltage available 2) MIL-STD-883 type screening available IKNEE TYP (amps at 25C) 2.0 2.0 2.0 2.0 2.0 2.0 Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION * 905 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 08/03/01 42118 POSITIVE HIGH TEMPERATURE, FIXED VOLTAGE REGULATOR Mechanical Configuration All dimensions in inches Pin 1 2 3 Function VOUT Common VIN Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION * 905 E. Walnut St., Garland, TX 75040 * (972) 272-3571 * Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 08/03/01 |
Price & Availability of 42118-030 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |