|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
EMZ6.8N Diodes Zener diode EMZ6.8N Applications Voltage regulation (Common anode dual chips) External dimensions (Unit : mm) Land size figure (Unit : mm) 1.0 0.5 0.5 0.150.05 1.60.2 0.30.1 0.05 0.7 0.80.1 Features 1) Ultra small mold type. (EMD3) 2) High reliability 0.20.1 -0.05 (2) (3) 0.7 1.60.2 0.7 00.1 0.1Min 0.6 EMD3 0.6 (1) 0.550.1 0.70.1 Construction Silicon epitaxial planar 0.5 0.5 1.00.1 Structure ROHM : EMD3 JEDEC : SOT-416 JEITA : SC-75A dot (year week factory) Taping specifications (Unit : mm) 4.00.1 2.00.05 1.550.1 0 0.30.1 3.50.05 1.750.1 1.80.2 5.50.2 1.80.1 0.50.1 00.1 8.00.2 0.90.2 Absolute maximum ratings (Ta=25C) Param eter Power dis s ipation*1 Junction tem perature S torage tem perature (*1) Total of 2 elem ents Sym bol P Tj Ts tg Lim its 150 150 -55 to +150 Unit mW Electrical characteristics (Ta=25C) Param eter Zener voltage R evers e current D ynam ic im pedance Sym bol VZ IR ZZ Min. 6.47 Typ. Max. 7.14 0.50 40 Unit V A IZ =5m A VR =3.5V IZ =5m A Conditions Rev.B 1.3 1/2 EMZ6.8N Diodes Electrical characteristic curves (Ta=25C) 10 100 Ta=75 Ta=150 Ta=125 100 f=1MHz Ta=75 REVERSE CURRENT:IR (nA) 10 1 0.1 0.01 0.001 Ta=-25 ZENER CURRENT:Iz(mA) 1 Ta=25 Ta=-25 Ta=125 Ta=150 Ta=25 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 4 10 0.1 0.0001 0.01 6 6.5 7 7.5 8 0.00001 0 1 2 3 ZENER VOLTAGE:Vz(V) Vz-Iz CHARACTERISTICS REVERSE VOLTAGEVR(V) VR-IR CHARACTERISTICS 1 0 1 2 3 4 5 6 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 7.2 7.1 7 6.9 6.8 AVE:6.954V 6.7 Vz DISRESION MAP 0.1 20 CAPACITANCE BETWEENTERMINALS:Ct(pF) REVERSE CURRENT:IR(nA) ZENER VOLTAGE:Vz() Ta=25I Z=5mA n=30pcs 0.09 0.08 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 IR DISRESION MAP AVE:0.0143nA Ta=25 VR=3.5V n=30pcs 19.5 19 18.5 18 17.5 17 16.5 16 15.5 15 Ct DISRESION MAP AVE:19.06pF Ta=25 f=1MHz VR=0V n=10pcs 100 1000 TRANSIENT THAERMAL IMPEDANCE:Rth (/W) DYNAMIC IMPEDANCE:Zz() Mounted on epoxy board Rth(j-a) 100 Rth(j-c) IM=1mA IF=100mA 10 10 1ms time 300us 1 0.1 1 ZENER CURRENT(mA) Zz-Iz CHARACTERISTICS 10 1 0.001 0.01 1 10 100 TIME:t(s) Rth-t CHARACTERISTICS 0.1 1000 Rev.B 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |