 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| GP1UC10 Series GP1UC10 Series s Features 1. Low voltage drive type Supply voltage : 2.4 to 3.6V 2. Compact and surface mount type Mounting area : 4/5 compared with GP1U90X 3. Reflow soldering type (240C, for 5 seconds or less) 4.Taping reel type ( 330 mm reel, 1500 pieces) 5. Various B.P.F. (Band Pass Frequency) frequency to meet different user needs (36.7kHz/38kHz/40kHz/56.8kHz) 3V-Operating Type IR Detecting Unit for Remote Control s Outline Dimensions (0.9 ) Detector center (Unit : mm) 7.7 8.1 1 2 3 4 VCC VOUT GND Case GND ( 1.25) g Dummy pattern (GND potential) 3.5 * Pattern example viewed from PWB 3 - 0.9 2 g 3 - 0.9 1.4 3 g Case GND terminal area 2.5 2.5 1. Camera-integral VCRs 2. Cameras 1.6 1 4 6 - R0.4 2.2 5.7 C0.5 2.2 3.75 3.75 area : Be careful not to pull around the pattern. * Tolerance : 0.3 mm s Model Line-ups Model No. GP1UC10 GP1UC101 GP1UC102 GP1UC107 B.P.F. frequency 40 38 36.7 56.8 Unit kHz s Internal Block Diagram Vout Limiter B.P.F. Demodulator Integrator Comparator Vcc GND *CR for power filter is necessary. " In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device." 1.5 s Applications 3.5 3.5 3.4 1.6 2.0 GP1UC10 Series s Absolute Maximum Ratings Parameter Supply voltage Operating temperature Storage temperature Reflow soldering temperature *1 No dew condensation is allowed. (Ta=25C) Unit V C C C Symbol Rating VCC 0 to 4.0 Topr - 10 to + 70 *1 - 20 to + 70 Tstg 240 (reflow soldering time : 5 sec) Tsol s Recommended Operating Conditions Parameter Supply voltage Symbol VCC Rating 2.4 to 3.6 Unit V (Ta=25C, VCC =+3V) Symbol ICC V OH VOL T1 T2 fO Conditions No input light *2 *2,I OL = 400 mA *2 *2 MIN. VCC- 0.5 400 400 8 TYP. *3 MAX. 2.5 0.5 800 800 Unit mA V V s kHz m s Electro-optical Characteristics Parameter Dissipation current High level output voltage Low level output voltage High level pulse width Low level pulse width B.P.F. center frequency Ultimate distance *2 The burst wave as shown in the following figure shall be transmitted by the transmitter of our specifications. The carrier frequency of the transmitter, however, shall be same as *3, and measurement shall be taken of the 100th and subsequent pulses after start of transmission. *3 The B.P.F. center frequency fo varies with model, as shown in s Model Line-ups. Burst wave fO= ( *3 ) kHz Duty 50% 600 s 600 s Fig. 1 B.P.F. Frequency Characteristics [TYP.](GP1UC101) Fig. 2 Sensitivity Angle (Horizontal Direction) Characteristics [TYP.] for Reference - 15 0 + 15 + 30 Relative reception distance (%) - 30 100 80 Relative sensitivity (2dB/div) 60 + 45 40 + 60 20 + 75 + 90 - 45 - 60 - 75 28 30 32 34 36 38 40 42 44 46 48 - 90 Carrier frequency (kHz) GP1UC10 Series Fig. 3 Sensitivity Angle (Vertical Direction) Characteristics [TYP.] for Reference - 15 0 + 15 + 30 Fig. 4 Relative Reception Distance vs. Ambient Temperature [TYP.] for Reference 120 Relative reception distance (%) - 30 100 80 Relative reception distance (%) 100 80 60 + 45 40 + 60 20 + 75 + 90 - 45 60 Unit SHARP standard transmitter 40 - 60 20 0 - 40 - 75 - 90 Relative comparison with reception distance at V CC =3V, =0 , Ee <10 lx and Ta=25 C taken as 100% - 20 0 20 40 60 80 100 Ambient temperature Ta (C) Fig. 5 AEHA (Japan Association of Electrical Home Appliances) Code Pulse Width Characteristics (1st Bit) [TYP.] for Reference 700 600 Fig. 6 Spectral Sensitivity for Reference 100 90 80 T a = 25C 500 Relative sensitivity (%) Unit AEHA code generating transmitter 1st bit VCC =3V, Ta=RT, =0 , Ee < 10 lx, T=430 s 70 60 50 40 30 20 10 0 600 700 800 900 1000 1100 1200 Pulse width ( s) 400 300 200 100 0 0 1234 56 7 8 9 10 11 12 13 14 Reception distance (m) Wavelength (nm) q Please refer to the chapter "Precautions for Use". (Page 78 to 93) |
Price & Availability of GP1UC10
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |