 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NC7WZ08 TinyLogic UHS Dual 2-Input AND Gate April 2000 Revised February 2005 NC7WZ08 TinyLogic UHS Dual 2-Input AND Gate General Description The NC7WZ08 is a dual 2-Input AND Gate from Fairchild's Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage. Features s Space saving US8 surface mount package s MicroPak Pb-Free leadless package s Ultra High Speed; tPD 2.5 ns Typ into 50 pF at 5V VCC s High Output Drive; r24 mA at 3V VCC s Broad VCC Operating Range; 1.65V to 5.5V s Matches the performance of LCX when operated at 3.3V VCC s Power down high impedance inputs/output s Overvoltage tolerant inputs facilitate 5V to 3V translation s Patented noise/EMI reduction circuitry implemented Ordering Code: Product Order Number NC7WZ08K8X NC7WZ08K8X_NL (Note 1) NC7WZ08L8X Package Number MAB08A MAB08A MAC08A Code Top Mark WZ08 WZ08 N4 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide 3k Units on Tape and Reel Package Description Supplied As Pb-Free 8-Lead US8, JEDEC MO-187, Variation CA 3k Units on Tape and Reel 3.1mm Wide Pb-Free 8-Lead MicroPak, 1.6 mm Wide 5k Units on Tape and Reel Pb-Free package per JEDEC J-STD-020B. Note 1: "_NL" indicates lead-free product (per JEDEC J-STD-020B). Device is available in Tape and Reel only. TinyLogicis a registered trademark of Fairchild Semiconductor Corporation. MicroPak is a trademark of Fairchild Semiconductor Corporation. (c) 2005 Fairchild Semiconductor Corporation DS500268 www.fairchildsemi.com NC7WZ08 Logic Symbol IEEE/IEC Connection Diagrams Pin Descriptions Pin Names An , Bn Yn Description Inputs Output (Top View) Pin One Orientation Diagram Function Table Y Inputs A L L H H H HIGH Logic Level AAA represents Product Code Top Mark - see ordering code AB Output Y L L L H LOW Logic Level Note: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin (see diagram). B L H L H L Pad Assignments for MicroPak (Top Thru View) www.fairchildsemi.com 2 NC7WZ08 Absolute Maximum Ratings(Note 2) Supply Voltage (VCC) DC Input Voltage (VIN) DC Output Voltage (VOUT) DC Input Diode Current (IIK) @VIN 0.5V DC Output Diode Current (IOK) @VOUT 0.5V DC Output Current (IOUT) DC VCC/GND Current (ICC/IGND) Storage Temperature (TSTG) Junction Temperature under Bias (TJ) Junction Lead Temperature (TL) (Soldering, 10 seconds) Power Dissipation (PD) @ 85qC 260qC 250 mW 0.5V to 7V 0.5V to 7V 0.5V to 7V 50 mA 50 mA r50 mA r100 mA 65qC to 150qC 150qC Recommended Operating Conditions (Note 3) Supply Voltage Operating (VCC) Supply Voltage Data Retention (VCC) Input Voltage (VIN) Output Voltage (VOUT) Operating Temperature (TA) Input Rise and Fall Time (tr, tf) VCC VCC VCC 1.8V r 0.15V, 2.5V r 0.2V 3.3V r0.3V 5.0V r0.5V 0 ns/V to 20 ns/V 0 ns/V to 10 ns/V 0 ns/V to 5 ns/V 250qC/W 1.65V to 5.5V 1.5V to 5.5V 0V to 5.5V 0V to VCC 40qC to 85qC Thermal Resistance (TJA) Note 2: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. Note 3: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage VCC (V) 1.65-1.95 2.3-5.5 1.65-1.95 2.3-5.5 1.65 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 VOL LOW Level Output Voltage 1.65 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 IIN IOFF ICC Input Leakage Current Power Off Leakage Current Quiescent Supply Current 0-5.5 0.0 1.65-5.5 1.55 2.2 2.9 4.4 1.29 1.9 2.5 2.4 3.9 1.65 2.3 3.0 4.5 1.52 2.15 2.80 2.68 4.20 0.0 0.0 0.0 0.0 0.08 0.10 0.15 0.22 0.22 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 Min 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC 1.55 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 V IOL IOL IOL IOL IOL 4 mA 8 mA 16 mA 24 mA 32 mA 5.5V V VIN VIL IOL 100 PA V IOH IOH IOH IOH IOH V VIN VIH IOH TA 25qC Typ Max TA 40qC to 85qC Max Min 0.75 VCC 0.7 VCC Units V Conditions 0.25 VCC 0.3 VCC V 100 PA 4 mA 8 mA 16 mA 24 mA 32 mA r0.1 1 1 r1 10 10 PA PA PA VIN VIN 5.5V, GND 5.5V, GND VIN or VOUT 3 www.fairchildsemi.com NC7WZ08 AC Electrical Characteristics Symbol tPLH, tPHL Parameter Propagation Delay VCC (V) 1.8 r 0.15 2.5 r 0.2 3.3 r 0.3 5.0 r 0.5 tPLH, tPHL CIN CPD Input Capacitance Power Dissipation Capacitance Propagation Delay 3.3 r 0.3 5.0 r 0.5 0 3.3 5.0 Min 2.0 1.0 0.8 0.5 1.2 0.8 TA 25qC Typ 5.7 3.5 2.6 1.9 3.2 2.5 2.5 14.5 19.5 Max 10.5 5.8 3.9 3.1 4.8 3.7 TA 40qC to 85qC Max 11.0 6.2 4.3 3.3 5.2 4.0 2.0 1.0 0.8 0.5 1.2 0.8 Min Units Conditions Figure Number ns CL RL CL RL 15 pF, 1 M: 50 pF, 500: Figures 1, 3 ns pF pF Figures 1, 3 (Note 4) Figure 2 Note 4: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD (CPD) (VCC) (fIN) (ICC static) AC Loading and Waveforms CL includes load and stray capacitance Input PRR 1.0 MHz, tw 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input PRR Ac Waveform; tr tf 1.8 ns; 50% 10 MHz; Duty Cycle FIGURE 2. ICCD Test Circuit www.fairchildsemi.com 4 NC7WZ08 Tape and Reel Specification TAPE FORMAT for US8 Package Designator K8X Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) Tape Section Leader (Start End) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed TAPE FORMAT for MicroPak Package Designator L8X Carrier Tape Section Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Leader (Start End) Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) 5 www.fairchildsemi.com NC7WZ08 Tape and Reel Specification REEL DIMENSIONS inches (millimeters) (Continued) Tape Size 8 mm A 7.0 (177.8) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) W1 0.331 0.059/0.000 (8.40 1.50/0.00) W2 0.567 (14.40) W3 W1 0.078/0.039 (W1 2.00/1.00) www.fairchildsemi.com 6 NC7WZ08 Physical Dimensions inches (millimeters) unless otherwise noted 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide Package Number MAB08A 7 www.fairchildsemi.com NC7WZ08 TinyLogic UHS Dual 2-Input AND Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 8-Lead MicroPak, 1.6 mm Wide Package Number MAC08A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 8 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com |
Price & Availability of NC7WZ08L8X
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |
