![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DCR3990A52 Phase Control Thyristor Preliminary Information DS5940-1.0 March 2009 (LN 26623) FEATURES Double Side Cooling High Surge Capability KEY PARAMETERS VDRM IT(AV) ITSM dV/dt* dI/dt 5200V 3990A 53400A 2000V/s 400A/s APPLICATIONS High Power Drives High Voltage Power Supplies Static Switches VOLTAGE RATINGS Part and Ordering Number Repetitive Peak Voltages VDRM and VRRM V 5200 5000 4500 Conditions * Higher dV/dt selections available DCR3990A52* DCR3990A50 DCR3990A45 Tvj = -40 to 125 C C, IDRM = IRRM = 300mA, VDRM, VRRM tp = 10ms, VDSM & VRSM = VDRM & VRRM + 100V respectively Lower voltage grades available. o o *5000V @ -40 C, 5200V @ 0 C Outline type code: A (See Package Details for further information) ORDERING INFORMATION When ordering, select the required part number shown in the Voltage Ratings selection table. For example: DCR3990A52 Note: Please use the complete part number when ordering and quote this number in any future correspondence relating to your order. Fig. 1 Package outline 1/10 www.dynexsemi.com DCR3990A52 SEMICONDUCTOR CURRENT RATINGS Tcase = 60 unless stated otherwise C Symbol Double Side Cooled IT(AV) IT(RMS) IT Parameter Test Conditions Max. Units Mean on-state current RMS value Continuous (direct) on-state current Half wave resistive load - 3990 6270 5640 A A A SURGE RATINGS Symbol ITSM It 2 Parameter Surge (non-repetitive) on-state current I t for fusing 2 Test Conditions 10ms half sine, Tcase = 125 C VR = 0 Max. 53.4 14.25 Units kA MA s 2 THERMAL AND MECHANICAL RATINGS Symbol Rth(j-c) Parameter Thermal resistance - junction to case Test Conditions Double side cooled Single side cooled DC Anode DC Cathode DC Rth(c-h) Thermal resistance - case to heatsink Clamping force 83.0kN (with mounting compound) Tvj Virtual junction temperature On-state (conducting) Reverse (blocking) Tstg Fm Storage temperature range Clamping force Double side Single side Min. -55 74.0 Max. 0.00603 0.01024 0.01467 0.001 0.002 135 125 125 91.0 Units C/W C/W C/W C/W C/W C C C kN 2/10 www.dynexsemi.com DCR3990A52 SEMICONDUCTOR DYNAMIC CHARACTERISTICS Symbol IRRM/IDRM dV/dt dI/dt Parameter Peak reverse and off-state current Max. linear rate of rise of off-state voltage Rate of rise of on-state current Test Conditions At VRRM/VDRM, Tcase = 125 C To 67% VDRM, Tj = 125 gate open C, From 67% VDRM to 2x IT(AV) Gate source 30V, 10 , tr < 0.5s, Tj = 125 C Repetitive 50Hz Non-repetitive Min. - Max. 300 2000 400 1000 Units mA V/s A/s A/s VT(TO) Threshold voltage - Low level Threshold voltage - High level 1000 to 2600A at Tcase = 125 C 2600 to 9000A at Tcase = 125 C 1000 to 2600A at Tcase = 125 C 2600 to 9000A at Tcase = 125 C VD = 67% VDRM, gate source 30V, 10 tr = 0.5s, Tj = 25 C - 0.85 0.99 0.2115 0.1578 3 V V m m s rT On-state slope resistance - Low level On-state slope resistance - High level tgd Delay time tq Turn-off time Tj = 125 C, VR = 200V, dI/dt = 1A/s, dVDR/dt = 20V/s linear 750 s QS Stored charge IT = 3000A, Tj = 125 dI/dt - 1A/s, C, VRpeak ~3100V, VR ~ 2100V 4030 5420 C IRR Reverse recovery current 49 59 A IL Latching current Tj = 25 VD = 5V C, - 3 A IH Holding current Tj = 25 RG-K = , ITM = 500A, IT = 5A C, - 300 mA 3/10 www.dynexsemi.com DCR3990A52 SEMICONDUCTOR GATE TRIGGER CHARACTERISTICS AND RATINGS Symbol VGT VGD IGT IGD Parameter Gate trigger voltage Gate non-trigger voltage Gate trigger current Gate non-trigger current Test Conditions VDRM = 5V, Tcase = 25 C At 50% VDRM, Tcase = 125 C VDRM = 5V, Tcase = 25 C At 50% VDRM, Tcase = 125 C Max. 1.5 0.4 300 10 Units V V mA mA CURVES 9000 8000 Instantaneous on-staate current, I T - (A) 7000 6000 5000 4000 3000 2000 1000 0 0 0.5 1 1.5 2 2.5 Instantaneous on-state voltage , VT - (V) min @ 125C max @ 125C max @ 25C min @ 25C Fig.2 Maximum & minimum on-state characteristics VTM EQUATION VTM = A + Bln (IT) + C.IT+D. IT A = 0.061592 B = 0.115333 C = 0.000119 D = 0.002394 these values are valid for Tj = 125 for IT 250A to 9000A C Where 4/10 www.dynexsemi.com DCR3990A52 SEMICONDUCTOR 12 180 120 90 60 30 130 120 ( oC ) 110 100 90 80 70 60 50 40 30 20 10 180 120 90 60 30 10 Mean power dissipation - (kW) 6 4 2 Maximum case temperature, T 8 case 0 0 500 1000 1500 2000 2500 3000 3500 4000 Mean on-state current, IT(AV) - (A) 0 0 1000 2000 3000 4000 Mean on-state current, IT(AV) - (A) Fig.3 On-state power dissipation - sine wave Fig.4 Maximum permissible case temperature, double side cooled - sine wave 125 Maximum heatsink temperature, T Heatsink - ( C) 180 120 90 60 30 16 14 Mean power dissipation - (kW) 12 10 8 6 4 2 0 0 0 1000 2000 3000 4000 Mean on-state current, IT(AV) - (A) 0 500 1000 1500 2000 2500 3000 3500 4000 Mean on-state current, IT(AV) - (A) d.c. 180 120 90 60 30 100 75 50 25 Fig.5 Maximum permissible heatsink temperature, double side cooled - sine wave Fig.6 On-state power dissipation - rectangular wave 5/10 www.dynexsemi.com DCR3990A52 SEMICONDUCTOR 125 Maximum permissible case temperature , T case -( C) Maximum heatsink temperature T heatsink -(o C) 125 100 100 75 75 50 50 d.c. 180 120 90 60 30 25 d.c. 180 120 90 60 30 0 500 1000 1500 2000 2500 3000 3500 4000 Mean on-state current, IT(AV) - (A) 25 0 0 0 500 1000 1500 2000 2500 3000 3500 4000 Mean on-state current, IT(AV) - (A) Fig.7 Maximum permissible case temperature, double side cooled - rectangular wave Fig.8 Maximum permissible heatsink temperature, double side cooled - rectangular wave Ri ( C/kW) Ti (s) Ri ( C/kW) Ti (s) Ri ( C/kW) Ti (s) 1 3.01541 2 3 4 1.048955 0.983519 0.983519 0.059 0.059 0.059 0.205916 0.08069 16 Double side cooled Double side cooled Anode side cooled Cathode side cooled 0.703874 1.904794 2.69023 13.79162 3.156003 4.092806 1.556555 1.623962 7.077369 3.483481 1.745839 2.634274 6.648601 8.436484 1.762119 Transient Thermal Impedance - Zth (C/kW) 14 12 Anode side cooled Cathode side cooled i4 10 8 6 4 2 0 0.001 Z th i1 [ Ri (1 exp(T / Ti )] ARth(j-c) Conduction Tables show the increments of thermal resistance Rth(j-c) when the device operates at conduction angles other than d.c. Double side cooling AZth (z) A sine. rect. 180 0.44 0.31 120 0.49 0.43 90 0.55 0.49 60 0.60 0.55 30 0.64 0.61 15 0.66 0.64 Anode Side Cooling AZth (z) A sine. rect. 180 0.42 0.30 120 0.47 0.41 90 0.52 0.46 60 0.57 0.52 30 0.61 0.58 15 0.62 0.61 Cathode Sided Cooling AZth (z) A sine. rect. 180 0.42 0.30 120 0.47 0.41 90 0.52 0.46 60 0.57 0.52 30 0.60 0.58 15 0.62 0.60 0.01 0.1 Time (s) 1 10 100 Fig.9 Maximum (limit) transient thermal impedance - junction to case ( C/kW) 6/10 www.dynexsemi.com DCR3990A52 SEMICONDUCTOR 140 100 Conditions: Tcase = 125 C VR =0 Pulse width = 10ms 130 120 110 Surge current, ITSM - (kA) 100 90 80 70 60 50 40 30 20 10 1 1 10 Number of cycles 100 0 1 10 Pulse width, tP - (ms) Conditions: Tcase= 125 C VR = 0 half-sine wave ITSM I2t 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 100 I2t (MA2s) 25 Surge current, ITSM- (kA) 10 Fig.10 Multi-cycle surge current Fig.11 Single-cycle surge current 25000 Qsmax = 5413.5*(di/dt)0.4762 600 IRRmax = 58.296*(di/dt)0.7559 500 Reverse recovery current, IRR - (A) 20000 Stored Charge, Qs - (uC) 400 15000 300 Qsmin = 4030.8*(di/dt)0.5002 10000 Conditions: Tj= 125C VRpeak ~ 3100V VRM ~ 2100V snubber as appropriate to control reverse voltage IRRmin = 49.567*(di/dt)0.7701 Conditions : Tj = 125C VRpeak ~ 3100V VRM ~ 2100V snubber as appropriate to control reverse voltage 0 5 10 15 20 200 5000 100 0 0 5 10 15 20 25 Rate of decay of on-state current, di/dt - (A/us) 0 Rate of decay of on-state current, di/dt - (A/us) Fig.12 Stored charge Fig.13 Reverse recovery current 7/10 www.dynexsemi.com DCR3990A52 SEMICONDUCTOR 10 9 Pulse Width us 100 200 500 1000 10000 Pulse Power PGM (Watts) Frequency Hz 50 100 150 150 150 150 150 150 150 100 20 - Gate trigger voltage, VGT - (V) 8 7 6 5 4 3 2 1 0 0 400 150 125 100 25 - Upper Limit Preferred gate drive area Tj = 125 C o Tj = 25oC Tj = -40oC Lower Limit 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Gate trigger current IGT, - (A) Fig14 Gate Characteristics 30 Lower Limit Upper Limit 5W 10W 20W 50W 100W 150W -40C 25 Gate trigger voltage, VGT - (V) 20 15 10 5 0 0 1 2 3 4 5 6 7 8 9 10 Gate trigger current, IGT - (A) Fig. 15 Gate characteristics 8/10 www.dynexsemi.com DCR3990A52 SEMICONDUCTOR PACKAGE DETAILS For further package information, please contact Customer Services. All dimensions in mm, unless stated otherwise. DO NOT SCALE. Device 22CT93A 28CT93A 42CT93A DCR3990A52 DCR3220A65 DCR2560A85 Maximum Minimum Thickness Thickness (mm) (mm) 35.165 34.555 35.24 34.63 35.47 34.86 35.61 35 35.85 35.24 36.19 35.58 Lead length: 420mm Lead terminal connector: M4 ring Package outline type code: A Fig.16 Package outline 9/10 www.dynexsemi.com DCR3990A52 SEMICONDUCTOR POWER ASSEMBLY CAPABILITY The Power Assembly group was set up to provide a support service for those customers requiring more than the basic semiconductor, and has developed a flexible range of heatsink and clamping systems in line with advances in device voltages and current capability of our semiconductors. We offer an extensive range of air and liquid cooled assemblies covering the full range of circuit designs in general use today. The Assembly group offers high quality engineering support dedicated to designing new units to satisfy the growing needs of our customers. Using the latest CAD methods our team of design and applications engineers aim to provide the Power Assembly Complete Solution (PACs). HEATSINKS The Power Assembly group has its own proprietary range of extruded aluminium heatsinks which have been designed to optimise the performance of Dynex semiconductors. Data with respect to air natural, forced air and liquid cooling (with flow rates) is available on request. For further information on device clamps, heatsinks and assemblies, please contact your nearest sales representative or Customer Services. Stresses above those listed in this data sheet may cause permanent damage to the device. In extreme conditions, as with all semiconductors, this may include potentially hazardous rupture of the package. Appropriate safety precautions should always be followed. http://www.dynexsemi.com e-mail: power_solutions@dynexsemi.com HEADQUARTERS OPERATIONS DYNEX SEMICONDUCTOR LTD Doddington Road, Lincoln Lincolnshire, LN6 3LF. United Kingdom. Tel: +44(0)1522 500500 Fax: +44(0)1522 500550 CUSTOMER SERVICE Tel: +44(0)1522 502753 / 502901. Fax: +44(0)1522 500020 Dynex Semiconductor 2003 TECHNICAL DOCUMENTATION - NOT FOR RESALE. PRODUCED IN UNITED KINGDOM. This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request. All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners. 10/10 www.dynexsemi.com |
Price & Availability of DCR3990A45
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |