View FCD488-010_4648270.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

COMMERCIAL LASERS
Continuous Wave 488 nm Solid-State Laser FCD488
Key Features
* Compact - optics and electronics integrated in one housing * Low heat load - no heat sink required * Good efficiency - requires only small 5 V power supply * Fiber-based architecture - enables fiber-delivered version * High reliability - due to telecom-style packaging technology
Applications
* Biotechnology * Semiconductor instrumentation * General instrumentation
The FCD488 is a continuous wave 10, 20 and 25 mW 488 nm solid-state laser, featuring fiber-based architecture. The package contains both the optical elements of the laser and the control electronics, allowing full control and diagnostics of the laser system through an analog interface and RS232 interface. Powered by an external 5 V DC power supply, the laser is cost-efficient, reliable, and compact, with excellent electrical and thermal efficiency. It has a low heat load, so the laser operates without a heat sink. Based on JDSU's Frequency Converted Diode technology, the FCD488 enables consistent high volume laser manufacturing, with a "package, splice, and test" design. The components are put in hermetic packaging. The fibers are spliced together. And the laser is tested. The FCD488 is available in two versions: a free space and a fiber-delivered version with the same characteristics and reliability as the free space laser.
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com
CONTINUOUS WAVE 488 NM SOLID-STATE LASER
2
Dimensions Diagram (Specifications in mm unless otherwise noted.)
125 COMMUNICATION PORT 15-PIN D-SUB CONNECTOR 5.0 7.5 115.0
5 V PO WER SUP PL Y 55.0 70 17.5 4X 4.0 THRU 10.1 13.8
LA S E R S T A T U S 2 LEDS 11.5 19.0
34
5.5
Free Space
COMMUNICATION PORT 15-PIN D-SUB CONNECTOR
1.5M HARNESS LENGTH 7.5
68 ROM LENGTH
5V POWER SUPPLY 55.0 70 12.7 20 LASER STATUS 2 LEDS 4X 4.0 THRU 115.0 125 5.0 22
34
5.5
Fiber Delivered
CONTINUOUS WAVE 488 NM SOLID-STATE LASER
3
Specifications
Parameter
FCD488-010 (Free Space)
FCD488-020 (Free Space)
FCD488-025 (Free Space)
FCD488FC-010 FCD488FC-020 (Fiber Delivered) (Fiber Delivered)
Optical Wavelength Output power Power stability (2 hour, 253 C) after warm-up Mode quality M2 Beam diameter (1/e2 point) Beam divergence (full angle) Polarization ratio (E-vector is vertical) Noise (rms, 20 Hz to 2 MHz) Ellipticity Pointing stability after warm-up Static alignment Beam position Beam angle Environmental Base plate temperature Operating Non-operating Shock (11 ms duration) Operating Non-operating Vibration (sinusoidal, 5 to 500 Hz) Operating Non-operating Warm-up time Electrical requirements Operating voltage Current required
10 mW
20 mW
488 2 nm 25 mW 10 mW <2.0% <1.2 0.7 mm 10% <1.0 mrad >100:1 <0.5% <10% <10 rad/C 0.25 mm 2.5 mrad 0.5 mm 50 mrad
20 mW
0.25 mm 2.5 mrad
0.25 mm 2.5 mrad
0.5 mm 50 mrad
10 to 45C 0 to 60C 1g 25 g 0.3 g 2g <10 minutes 5.0 0.4 V DC 4A
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide, or via e-mail at customer.service@jdsu.com.
Sample: FCD488-010
Product Code FCD488-010 FCD488-020 FCD488-025 FCD488FC-010 FCD488FC-020
Description FCD continuous wave 10 mW 488 nm free space solid-state laser FCD continuous wave 20 mW 488 nm free space solid-state laser FCD continuous wave 25 mW 488 nm free space solid-state laser FCD continuous wave 10 mW 488 nm fiber delivered solid-state laser FCD continuous wave 20 mW 488 nm fiber delivered solid-state laser
CONTINUOUS WAVE 488 NM SOLID-STATE LASER
Compliance with Regulatory Requirements
The FCD488 laser system is an OEM version of a JDSU solid-state laser and as such only intended for integration into other equipment. These lasers do not comply with CDRH. The customer is responsible for CDRH certification of the system incorporating the FCD488 laser system. The unit has been designed and tested to comply with the following standards: Electromagnetic radiated and line conducted emissions tested to standard EN 55022. Electromagnetic immunity tested to standard EN 61326 in compliance with IEC 601010-1 and IEC 60825-1.
Warranty
JDSU FCD488 solid-state lasers are warranted to be free of defects in materials and workmanship for twelve months from the date of shipment or 5,000 hours, whichever occurs first.
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com FCD488.DS.CL.AE March 2009
Product specifications and descriptions in this document subject to change without notice. (c) 2009 JDS Uniphase Corporation 30149042 003 0309

▲Up To Search▲

Price & Availability of FCD488-010

	To Download FCD488-010 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .