 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Schottky barrier diode RSX501LA-20 Applications General rectification Features 1) Small and Thin power mold type (PMDT) 2) High reliability. 3) Low IR Dimensions (Unit : mm) Land size figure (Unit : mm) 2.0 1.4 Structure Silicon epitaxial planar ROHM : PMD PMD Structure Taping dimensions (Unit : mm) 2.00.05 4.00.1 1.750.1 1.550.1 0 0.250.05 5.50.05 12.00.2 1.4 1.550.1 0 2.70.1 4.00.1 1.250.1 Absolute maximum ratings (Ta=25C) Parameter Limits Symbol Reverse voltage (repetitive peak) 25 VRM Reverse voltage (DC) VR 20 Average rectified forward current (*1) 5.0 Io Forward current surge peak 60Hz1cyc 70 IFSM Junction temperature 125 Tj Storage temperature -40 to +125 Tstg (*1) Alumina substrate at the time of assemble, Tc=90 max. Unit V V A A Electrical characteristic (Ta=25C) Parameter Forward voltage Reverse current 5.00.1 Symbol VF IR Min. - Typ. - Max. 0.39 500 Unit V A Conditions IF=3.0A VR=20V www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 5.00.1 1/3 2009.10 - Rev.A 4.4 RSX501LA-20 Electrical characteristic curves 10 Ta=125 Ta=75 Data Sheet 1000000 Ta=125 100000 REVERSE CURRENT:IR(uA) 1000 f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(pF) FORWARD CURRENT:IF(A) 1 Ta=25 10000 1000 100 Ta=75 0.1 Ta=-25 Ta=25 100 0.01 Ta=-25 10 1 0.001 0 100 200 300 400 500 600 FORWARD VOLTAGEVF(mV) VF-IF CHARACTERISTICS 10 0 5 10 15 20 25 30 0 REVERSE VOLTAGEVR(V) VR-IR CHARACTERISTICS 5 10 15 20 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 25 30 380 FORWARD VOLTAGE:VF(mV) Ta=25 IF=3A n=30pcs 1000 900 REVERSE CURRENT:IR(uA) 800 700 600 500 400 300 200 100 AVE:196.8uA Ta=25 VR=20V n=30pcs 1050 1040 1030 Ta=25 f=1MHz VR=0V n=10pcs CAPACITANCE BETWEEN TERMINALS:Ct(pF) 370 1020 1010 1000 990 980 970 960 950 AVE:997.4pF 360 350 AVE:350.0mV 340 330 VF DISPERSION MAP 0 IR DISPERSION MAP Ct DISPERSION MAP 300 RESERVE RECOVERY TIME:trr(ns) PEAK SURGE FORWARD CURRENT:IFSM(A) 250 200 150 100 50 0 IFSM DISRESION MAP 300 250 PEAK SURGE FORWARD CURRENT:IFSM(A) 200 150 100 50 0 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 Ifsm t Ifsm 1cyc 8.3ms 30 25 20 15 10 5 0 trr DISPERSION MAP Ta=25 IF=0.5A IR=1A Irr=0.25*IR n=10pcs 300 250 200 150 100 50 0 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 Ifsm 8.3ms 8.3ms 1cyc AVE:186.0A AVE:11.6ns 1000 Mounted on epoxy board PEAK SURGE FORWARD CURRENT:IFSM(A) 5 Rth(j-a) TRANSIENT THAERMAL IMPEDANCE:Rth (/W) 100 FORWARD POWER DISSIPATION:Pf(W) 4 D=1/2 DC Sin(180) 10 IM=100mA Rth(j-c) IF=1A 3 2 1 1ms time 1 300us 0.1 0.001 0.1 10 1000 0 0 2 4 6 AVERAGE RECTIFIED FORWARD CURRENTIo(A) Io-Pf CHARACTERISTICS 8 10 TIME:t(s) Rth-t CHARACTERISTICS www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 2/3 2009.10 - Rev.A RSX501LA-20 Data Sheet 5 15 0A Io AVERAGE RECTIFIED FORWARD CURRENT:Io(A) t 10 T DC 5 Sin(180) VR D=t/T VR=10V Tj=125 15 0A 0V t 10 DC T Io VR D=t/T VR=10V Tj=125 4 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) REVERSE POWER DISSIPATION:P R (W) 0V 3 DC 2 D=1/2 D=1/2 5 Sin(180) 1 Sin(180) D=1/2 0 0 0 25 50 75 100 125 0 AMBIENT TEMPERATURE:Ta() Derating Curve(Io-Ta) 25 50 75 CASE TEMPARATURE:Tc() Derating Curve(Io-Tc) 100 125 0 0 10 20 30 REVERSE VOLTAGE:VR(V) VR-P R CHARACTERISTICS 30 No break at 30kV ELECTROSTATIC DDISCHARGE TEST ESD(KV) 25 20 15 10 5 0 C=200pF R=0 C=100pF R=1.5k No break at 30kV ESD DISPERSION MAP www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 3/3 2009.10 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of RSX501LA-2009
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |