 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Fiber Optic Products Catalog Tooling Powermeter Launch Lead Kits for Optical Testing and Certification Today testing of fiber optic links is more sensitive than ever. AMP NETCONNECT test kits guarantee precise and replicable fiber testing. All kits contain connectors with controlled end faces and support testing with 3 jumper test method in accordance to ISO/IEC 14763-3. Each kit contains: Test leads for simplex and duplex IL test Test leads for CPR tests Fiber coupling bushes Two mandrels (Multimode only) Cleaning aides Instruction manual Data sheet of end face geometry Description 50 m, Multimode Launch Lead 62.5 m, Multimode Launch Lead 9 m, Singlemode Launch Lead Y- -X -1 -2 -3 -4 -5 Connector Type SC/PC to SC/PC SC/PC to ST/PC SC/PC to LC/PC SC/PC to FC/PC SC/PC to MT-RJ Y- -X -6 -7 -8 -9 1- -0 Connector Type ST/PC to SC/PC ST/PC to ST/PC ST/PC to LC/PC ST/PC to FC/PC ST/PC to MT-RJ Part Number Y-6695241-X Y-6695243-X Y-6695245-X Y- -X 1- -1 1- -2 1- -3 1- -4 1- -5 Connector Type LC/PC to SC/PC LC/PC to ST/PC LC/PC to LC/PC LC/PC to FC/PC LC/PC to MT-RJ Y- -X 1- -6 1- -7 1- -8 1- -9 2- -0 Connector Type FC/PC to SC/PC FC/PC to ST/PC FC/PC to LC/PC FC/PC to FC/PC FC/PC to MT-RJ Explanation: Connector 1 -- to test equipment Connector 2 -- under test OTDR Launch Lead Kits for Optical Testing and Certification Each kit contains: Launch and tail lead Length 400 m Multimode and 500 m Singlemode Data sheet of end face geometry Coupling bushings Cleaning aides Instruction manual Y- -X -1 -2 -3 -4 -5 Connector Type SC/PC to SC/PC SC/PC to ST/PC SC/PC to LC/PC SC/PC to FC/PC SC/PC to MT-RJ Y- -X -6 -7 -8 -9 1- -0 Connector Type ST/PC to SC/PC ST/PC to ST/PC ST/PC to LC/PC ST/PC to FC/PC ST/PC to MT-RJ Description 50 m, Multimode Launch Lead 62.5 m, Multimode Launch Lead 9 m, Singlemode Launch Lead Part Number Y-6695240-X Y-6695242-X Y-6695244-X Y- -X 1- -1 1- -2 1- -3 1- -4 1- -5 Connector Type LC/PC to SC/PC LC/PC to ST/PC LC/PC to LC/PC LC/PC to FC/PC LC/PC to MT-RJ Y- -X 1- -6 1- -7 1- -8 1- -9 2- -0 Connector Type FC/PC to SC/PC FC/PC to ST/PC FC/PC to LC/PC FC/PC to FC/PC FC/PC to MT-RJ Explanation: Connector 1 -- to test equipment Connector 2 -- under test Consumables for Power Meter and OTDR Launch Lead Kits Description Cleaning Lens Book Compressed Air Bottle Cleaning Stick 2.50 mm Cleaning Stick 1.25 mm Cleaning Stick MT-RJ Part Number 434376-1 1206860-1 1918807-1 1918808-1 1391089-1 Indicates non-RoHS compliant. Note: Part Numbers are RoHS compliant except: 84 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Tooling (Continued) Connectors/Adapters/ Tooling & Accessories Tool Kit Compatibility Chart Part Number Deluxe Premises Termination Tool Kit MT-RJ Jack Tool Kit LIGHTCRIMP PLUS No Epoxy/ No Polish Universal Tool Kit MT-RJ Plug Termination Kit LIGHTCRIMP PLUS No Epoxy/ No Polish LC Tool Kit LIGHTCRIMP PLUS No Epoxy/ No Polish SC Tool Kit LIGHTCRIMP PLUS No Epoxy/ No Polish ST Tool Kit LIGHTCRIMP SC/ST No Epoxy/Polish Tool Kits LIGHTCRIMP SC No Epoxy/ Polish Tool Kits LIGHTCRIMP ST No Epoxy/ Polish Tool Kits Pro-installer Epoxy/ Polish Tool Kits Epoxy/Polish SC/FC Tool Kit (no microscope, no curing oven) Epoxy/Polish ST Tool Kit (no microscope, no curing oven) Epoxy/Polish FSMA Tool Kit (no microscope, no curing oven) Epoxy/Polish FSD Tool Kit (no microscope, no curing oven) 1 2 MT-RJ Jacks X X X X X X MT-RJ SECURE Jacks X X X X X X MT-RJ Plugs 1278949-2 1278949-3* 1278346-1 1278346-2* 1278118-4 1278118-5* 1278745-1 1278745-2* 1754845-1 1754845-2* 1278022-1 1278022-2* 492697-1 492697-2* 503957-1 503957-3 492543-1 503706-1 503706-2 503330-1 503330-3 492322-1 501258-7 501258-8 501258-9 503746-7 503746-1 503746-2 503746-6 LIGHTCRIMP PLUS LC SC ST X X X X X X LIGHTCRIMP SC ST X X X X LC SC Epoxy/Polish ST FC FSD FSMA X X X X X X X X X X X X X X X X X X X X X X 1 X X X X1 X1 X1 X2 X 2 X X X X X X X X X X X X X X X X X X X X X2 X2 For LC terminations, also order Part Number 1754462-1. For LC terminations, also order Part Number 1754603-1. *Includes Precision Cleaver and Microscope. Epoxy/Polish Connector Consumables/Compatibility Chart Epoxies (Part Number) Polishing Films (Part Number) EPO-TEK TRA-CON HYSOL 9 m 5 m Diamond Film 0.3 m (504035-1 (501195-4) (502418-1) (1374484-1) (228433-8) (503887-1) (228433-5) X X X X X X X X X X X X X X X X X -- X -- X X X X -- X -- X -- X X -- X -- X -- X X -- X -- X Final Polishing Film (502748-2) -- -- X X X -- Consumable Package* Part Number 502306-4 502306-4 502306-2 502306-2 502306-2 502306-1 LC Singlemode LC Multimode SC Singlemode SC Multimode ST Singlemode ST Multimode *Epoxy & film for 100 connectors. Note: All part numbers are RoHS compliant. 85 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Tooling (Continued) Deluxe Premises Termination Tool Kit Part Number 1278949-2 Part Number 1278949-3 (Includes Precision Cleaver and Microscope) Product Facts Includes all tools need for installing popular field-installable connectors MT-RJ and MT-RJ SECURE Jacks LIGHTCRIMP PLUS SC, LC and ST connectors LIGHTCRIMP SC and ST connectors Convenient carrying case Includes consumables for LIGHTCRIMP connector terminations For additional LIGHTCRIMP connector terminations, order additional polishing films 228433-9, 228433-8, 228433-7 and 228433-5 (page 93) Includes instructional CD-ROM video MT-RJ Jack Termination Tool Kit Part Number 1278346-1 Part Number 1278346-2 (Includes Precision Cleaver and Microscope) Product Facts Includes all tools needed for installing MT-RJ and MT-RJ SECURE Jacks MT-RJ Plug Termination Tool Kit Part Number 1278745-1 Part Number 1278745-2 (Includes Precision Cleaver and Microscope) Product Facts Includes all tools needed to terminate MT-RJ Plug in handy plastic case Contents: Cleave pen, Jacket/Buffer/Coating Stripper, KEVLAR Shears, Strip Template, Cable Clamps, Cure Fixtures, Crimp Tool, Die Sets, Epoxy Dispensers LIGHTCRIMP PLUS Termination Tool Kits Product Facts Includes all tools needed for installing the listed type LIGHTCRIMP PLUS no epoxy/no polish connectors, MT-RJ and MT-RJ SECURE Jacks LIGHTCRIMP PLUS Connector Termination Video CD-Rom also available separately, Part Number 1374503-1 Convenient carrying case Description Universal LIGHTCRIMP PLUS No epoxy/No polish Tool Kit (SC, LC, ST and MT-RJ Jack) LIGHTCRIMP PLUS LC Connector Termination Tool Kit LIGHTCRIMP PLUS SC Connector Termination Tool Kit LIGHTCRIMP PLUS ST Connector Termination Tool Kit 1 Part Number 1278118-4 1278118-51 1754845-1 1754845-21 1278022-1 1278022-21 492697-1 492697-21 Includes Precision Cleaver and Microscope. KEVLAR is a trademark of E.I. du Pont de Nemours and Company. Note: All part numbers are RoHS compliant. 86 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Tooling (Continued) Connectors/Adapters/ Tooling & Accessories No Epoxy/No Polish Upgrade and Adaptive Termination Tool Kits Product Facts Upgrade Tool Kit supplements existing LIGHTCRIMP PLUS Tool Kits with tools needed to install LC connectors Terminates LIGHTCRIMP PLUS LC Adaptive Tool Kits supplements existing fiber optic tool kits with the tools needed to terminate LIGHTCRIMP PLUS connectors Saves money on full tool kit by reusing tools from currently owned tool kits Cost Savings Low Cost Upgrade for Current Tool Kit Part Number 1754847-2 Description LC LIGHTCRIMP PLUS Upgrade Kit LC LIGHTCRIMP PLUS Adaptive Kit LIGHTCRIMP PLUS LC SC LIGHTCRIMP PLUS Adaptive Kit LIGHTCRIMP PLUS SC Combination LIGHTCRIMP PLUS Adaptive Kit LIGHTCRIMP PLUS SC and ST ST LIGHTCRIMP PLUS Adaptive Kit LIGHTCRIMP PLUS ST Includes LC Die Set and Cable Holder Crimp Tool, LC Die Set, LC Cable Holder, Cleave Tool and Instruction Sheet Crimp Tool, SC Die Set, SC Cable Holder, Cleave Tool and Instruction Sheet Crimp Tool, SC and ST Die Sets, SC and ST Cable Holders, Cleave Tool and Instruction Sheets Crimp Tool, ST Die Set, ST Cable Holder, Cleave Tool and Instruction Sheet Fiber and Cable Strippers in Current Tool Kit 1754846-1 1754846-2* 1 Fiber and Cable Strippers in Current Tool Kit 1754737-1 1754737-2* Fiber and Cable Strippers in Current Tool Kit 1754739-1 1754739-2* Fiber and Cable Strippers in Current Tool Kit 1754738-1 1754738-2* *Includes microscope and precision cleaver LIGHTCRIMP PLUS Cable Holders Product Facts A Description ST SC LC Figure A B C Part Number 492703-1 1278023-1 1754138-1 Used in LIGHTCRIMP PLUS connector terminations (included in LIGHTCRIMP PLUS Tool Kits) B C Fiber Optic Cleave Tool Part Number 492674-1 Product Facts Cleave fibers for LIGHTCRIMP PLUS connectors One is included in basic tool kits for MT-RJ Jacks and LIGHTCRIMP PLUS connectors (not the LC Upgrade Kit) Easy to use: clamp, score and bend Blade life-span is 1000 cleaves Note: All part numbers are RoHS compliant. 87 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Tooling (Continued) "New" Hand Held Precision Cleaver Part Number 1871696-1 Hand Held Precision Cleaver Part Number 1871696-2 Hand Held Precision Cleaver with Trash Can (not a stocked item) Product Facts Operator independent = no craft sensitivity = consistent cleave every time Hand held operation 10,000 cleave blade life 4, 6, 8, 10, and 18 millimeter cleave lengths Product specific markings for LIGHTCRIMP PLUS and MT-RJ jack connectors, CORELINK splice, and fusion splicing Cleaved surface angle < 1.5 No lip, no fracture, and no roll-off Padded belt case for convenience and storage Neck lanyard included Tyco Electronics' hand held precision fiber cleaver provides precision quality cleaves with the feel and robustness of a full scale precision cleaver in a hand held size at an exceptionally competitive price. The 10,000 cleave blade life far exceeds that of any other hand held cleaver currently on the market. The detailed scale markings indicate proper cleave lengths for popular Tyco Electronics field installable fiber optic connectors and mechanical splices in addition to the standard numerical markings for other applications including fusion splicing. The included belt pouch and neck lanyard ensure that the cleaver is always within reach. Applications Affordable precision cleaving solution for: Field installable mechanical splice connectors Fusion splicing Mechanical splicing Bare fiber adapters Product Dimensions Length -- 74 mm [2.913 in.] Width -- 65.5 mm [2.578 in.] Thickness -- 33.5 mm [1.318 in.] Weight -- 136 g [0.30 lb.] Note: All part numbers are RoHS compliant. 88 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Tooling (Continued) Connectors/Adapters/ Tooling & Accessories LIGHTCRIMP Termination Tool Kits Product Facts Includes all tools needed for installing the listed type LIGHTCRIMP no epoxy/ polish connectors Convenient carrying case Includes consumables for installing 60 LIGHTCRIMP connectors For additional LIGHTCRIMP terminations, order additional polishing films 228433-9, 228433-8, 228433-7 and 228433-5 (page 93) Note: photo is representative of kits -- contents may vary by Part Number 1 Description LIGHTCRIMP SC Termination Kit Termination Kit Mini Tool Kit LIGHTCRIMP SC and ST Termination Kit Mini Tool Kit LIGHTCRIMP ST Microscope (if listed) -- Premium Microscope -- Premium Microscope -- -- Premium Microscope -- Part Number 503706-1 503706-2 503330-1 503330-3 492322-1 503957-1 503957-2 492543-1 LIGHTCRIMP Cleave Tool Part Number 503705-1 Product Facts Used in both SC and ST LIGHTCRIMP Connector terminations Included in the Deluxe and LIGHTCRIMP Tool Kits Note: All part numbers are RoHS compliant. 89 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Tooling (Continued) Pro-Installer Epoxy/Polish Connector Termination Tool Kits Product Facts Includes all tools necessary to install SC, ST, and FC Connectors For LC terminations, also order Part Number 1754462-1 Tool kits include: Pro-Crimper II Hand Tool and crimping dies Polishing bushings Polishing film (also sold separately, page 93) Cable and fiber strippers Scissors Scribe tool Includes polishing films to install 60 epoxy/polish connectors Epoxy is sold separately (see page 92) Kits available with curing oven and microscope or without Convenient carrying case Photo is representative of kits -- contents vary by Part Number Professional Installer Kit Description With 110 V Curing Oven and Microscope With 220 V Curing Oven and Microscope Without Curing Oven or Microscope Part Number 501258-7 501258-8 501258-9 Epoxy/Polish Connector Termination Tool Kits Product Facts Includes all tools necessary to install the listed epoxy/ polish connectors For LC terminations, also order Part Number 1754603-1 Tool kits include: Pro-Crimper II Hand Tool and crimping dies Polishing bushings Polishing film (also sold separately, page 93) Cable and fiber strippers Scissors Scribe tool Includes polishing films to install 60 epoxy/polish connectors Epoxy is sold separately (see page 92) Does not include curing oven or microscope Convenient carrying case Note: All part numbers are RoHS compliant. Description SC and FC ST FSMA FSD Part Number 503746-7 503746-1 503746-2 503746-6 90 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Tooling (Continued) Connectors/Adapters/ Tooling & Accessories Cable Stripper Part Number 1375317-1 Product Facts Cyclops Stripper ideal for stripping twisted pair (UTP and STP) and fiber optic cables up to 10.92 [0.43] diameter 1 Sapphire-Tipped Scribe Tool and Accessories Product Facts Long-lasting sapphire blade Pen-type casing Used to install all Epoxy/ Polish Connectors Included in Epoxy/Polish Tool Kits Description Sapphire-tipped Scribe Tool Replacement Blades Part Number 504064-1 504290-1 Note: All part numbers are RoHS compliant. 91 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Tooling (Continued) Epoxy/Polish LC Termination Accessories Product Facts Description LC Polishing Puck -- Metal LC Cable Preparation Template LC Hand Tool and Die Set LC 1.25 mm Ferrule Microscope Adapter LC Oven Block Assembly LC Adaptive Kit -- Anaerobic Epoxy Style LC Adaptive Kit -- Heat Cure Part Number 1754074-1 1588756-1 1588176-1 1278997-1 1457628-1 1754603-1 1754462-1 Supplement epoxy/polish tool kits on page 90 with these components to terminate LC Epoxy/Polish Connectors Different polishing films are required for LC polishing (see table on page 85 and films on page 93) EPO-TEK 353ND Epoxy Part Number 504035-1 Product Facts For use with SC and LC Connectors Pre-measured two-part packets for consistent results Long pot life once mixed Heat-cured epoxy Supplied in 4-gram packets Cures in 15 minutes at 115 C TRA-CON Epoxies Part Number 1918652-1 Product Facts For use with SC, LC, and ST Connectors Pre-measured two-part packets for consistent results Can be heat-cured or cured at ambient temperature Supplied in 2-gram packets Each packet terminates 250 connectors 25 packets per pack Pot life = 30 minutes Cures in: 24 hours @ 25 C 2 hours @ 65 C 10 minutes @ 110 C HYSOL Epoxy-Tubes Part Number 502418-1 Product Facts For use with SC, LC, ST, FSD, FC, and FSMA Connectors Two-part epoxy in two tubes Heat-cured epoxy Terminates 400 connectors One set of two (2) tubes per part number Pot life = 30 minutes Cures in 30 minutes at 100 C QC Quick Cure Adhesive Product Facts One-part adhesive eliminates the hassle and mess of mixing Applies easily and cures in minutes without heat or UV light Works with standard multimode epoxy-style connectors without performance degradation Faster procedure for timesaving productivity and lower installed costs Not for use with singlemode terminations Tube Size 3 grams Typical Connector Terminations Per Tube* 100 Part Number 492508-1 *Your individual termination techniques will affect the number of terminations per tube. Note: All part numbers are RoHS compliant. 92 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Tooling (Continued) Connectors/Adapters/ Tooling & Accessories Epoxy Applicator Syringe Part Number 501473-3 Product Facts 3 cc capacity Epoxy Curing Oven Product Facts Reduces time required to cure epoxy Provides a uniform, controlled curing environment Used for all epoxy/polish connectors Comes equipped to cure up to four Duplex Connectors and 12 Simplex Connectors at once Optional blocks reconfigure to 8 Duplex or 24 Simplex Connectors Variable temperature control (60C to 125C) Includes thermometer and cable support bracket Two voltage options Curing sleeves on page 98 1 Description 110 VAC 220 VAC Adapter Block for 8 Duplex Connectors Adapter Block for 24 Single Connectors Block Assembly for 1.6, 2.0 & 2.4 mm SC and FC (metal crimp body) and LC Connectors Part Number 502134-1 502134-2 502222-1 502129-1 1457528-1 Polishing Films Product Facts Used to install LIGHTCRIMP and epoxy/polish connectors Part Number Description Hand Polishing Film: 15 m4 9 mm 5 m4 1 m4 Fine Diamond Film1 0.3 m4 Final Polish Film1 Consumables Kit2 FSMA Multimode ST -- -- 228433-8 228433-7 -- 228433-5 -- 502306-1 Singlemode ST -- -- 228433-8 -- -- 228433-5 502748-2 502306-2 FC FSD/RSD SC LIGHTCRIMP XTC LC -- -- 228433-8 228433-7 -- 228433-5 -- 502306-1 -- -- 228433-8 -- -- 228433-5 502748-2 502306-2 -- -- 228433-8 228433-7 -- 228433-5 -- 502306-1 -- -- 228433-8 -- -- 228433-5 502748-2 502306-2 228433-9 -- 228433-8 228433-7 -- 228433-5 -- -- -- 1374484-13 228433-8 -- 503887-1 228433-5 -- 502306-4 Pack of 5. Contains all consumable supplies for at least 100 connectors. Pack of 15. 4 Pack of 100. 1 2 3 Note: All part numbers are RoHS compliant. 93 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Tooling (Continued) Hand Held Visual Fault Locator (VFL) Product Facts 650 nm (visible) Class 2 1.0 mW max Diode Laser Continuous and flashing (2-3 Hz pulsed) modes Rugged rubber shell and body design modeled after a popular military connector Lanyard attached dust cover Standard 2.5 mm adapter for SC, ST, and FC connectors Optional 1.25 mm adapter for LC and MU connectors. Unique design allows adapter to permanently reside on VFL so it is not misplaced allowing user to choose 1.25 mm or 2.5 mm Uses 1 "AA" style battery for >30 hours of continuous use Soft-sided belt case for convenience and storage The Tyco Electronics Hand Held Visual Fault Locator (VFL) is a rugged and affordable solution for identifying breaks and bending in optical fibers and cabling. Its powerful, red (650 nm) laser provides the ability to locate damaged, broken, or tightly bent fibers that cause undesirable attenuation in your system. The jacket of the cable will glow red at the location of the fault. The FLASH button allows the user to toggle between continuous or pulsed mode. The compact, rugged, and balanced design is based upon a popular harsh environment fiber optic connector. The single "AA" style battery is good for >30 hours of continuous use and the softsided protective case with belt loop provides a convenient and protective means of storage. Applications Affordable VFL Solution for: Identifying breaks, bends, and other damage in optical fibers Tracing fiber paths Identifying termination errors Continuity testing Product Dimensions Length -- 18.5 cm [7.283 in] Width -- 2.2 cm [0.866 in] Thickness -- 2.2 cm [0.866 in] Weight (w/battery) -- 150 g [0.33 lb] Description Hand Held Visual Fault Locator 1.25 mm Adapter for Hand Held VFL Includes Part Numbers 1828352-1 and 1828353-1 Part Number 1828352-1 1828353-1 1828352-2 Note: All part numbers are RoHS compliant. 94 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Tooling (Continued) Connectors/Adapters/ Tooling & Accessories Hand Held Microscope Product Facts High quality glass optics 200X magnification Optimal visual examination of terminated ends 500um field of view Dual illumination Coaxial for inspecting polish quality Oblique for general conditions Pre-centered, threaded adapter mount provides easy focusing and changing of connectors Field and laboratory examination for multimode and singlemode fibers Portable Integral infrared filter for safety Do NOT use any microscope to view active fiber signals Disposable, Type LR44 batteries Long-life LED (approximately 100,000 hours of operation) Each Kit includes: 10-power objective microscope with an impact resistant ergonomic rubber shell and high quality glass optics 20-power eyepiece Padded carrying case with an integrated belt loop and internal adapter storage pocket Neck lanyard with safety breakaway feature Universal 2.5 mm ferrule adapter (for SC, ST and FC) Other adapters available are: Universal 1.25 mm (adapts LC and MU) MT-RJ MPO MPO APC MPX MPX APC 1 Tyco Electronics' hand held microscope incorporates high quality glass optics and dual illumination lighting for unsurpassed 200X magnification. With a 500 m Field of View (FOV) and both coaxial and oblique illuminations, this microscope will meet the proposed TIA/IEC hand held microscope specification for a polish quality scope (coaxial) and general conditions scope (oblique) in one compact unit. The built in IR-laser attenuation filter will provide protection from accidental exposure to active fibers, although intentional and prolonged viewing of active fibers is not recommended. The ergonomic, impact resistant shell provides a rugged feel, and the included padded belt case and neck lanyard ensure that the microscope is always within reach. Applications Affordable inspection device for: Polish inspection General conditions (debris) inspection Cleave quality inspection Verifying core size Product Dimensions Length -- 186.9 mm [7.359 in.] Width -- 51.6 mm [2.030 in.] Height -- 31.5 mm [1.240 in.] Weight -- 317.5 g [0.70 lb.] Description Hand Held Microscope 1.25 mm Universal LC and MU 2.5 mm Universal SC, ST and FC SC APC MT-RJ Adapters MPO MPO APC LIGHTRAY MPX Connectors LIGHTRAY MPX APC Connectors FSMA * Coupling adapter Part Number 1985041-1 required. Part Number 1754767-1 1754765-1 1754766-1 1828833-1 1754768-1 1828836-1 1828837-1 1828834-1 1828835-1 1985040-1* DANGER: Active fibers should never be viewed through a microscope. Note: All part numbers are RoHS compliant. 95 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Tooling (Continued) MTP/MPO IBC Cleaner Part Number 1918809-1 Product Facts Cleans male or female MTP/MPO connectors Pre-washed cleaning cloth is lint and debris free Each cleaner is capable of more than 400 cleanings Can be used for bulkhead and unmated MTP/MPO cleaning Protective dust cover doubles as an adapter cap for cleaning unmated connectors FOCIS 5-Type MTP/MPO interface compliant Removes dust and oil contamination Ideal solution for cleaning parallel optics transceivers The MTP/MPO IBC (In Bulkhead Cleaner) dry cloth cleaner offered by Tyco Electronics utilizes a densely woven micro-fiber cloth that cleans male (with pins) or female MTP/MPO connectors while in adapters, bulkheads, faceplates, or in unmated form with the unique adapter/dust cover. The unique cleaning cloth also reduces static charge making it one of the most advanced cleaning systems available for bulkhead optical connector cleaning. Applications For effective cleaning of: Parallel optics transceivers Networking gear including switches and routers Factory or field connectors Male and female MTP/MPO connectors inside mating adapters Unmated male and female MTP/MPO connectors using included adapter Product Dimensions Length -- 184.2 mm [7.25 in.] Width -- 56.5 mm [2.22 in.] Thickness -- 22 mm [0.866 in.] Adapter Length -- 19.5 mm [0.759 in.] MTP is a trademark of US Conec Ltd. OPTIPOP R Reel Cleaner Product Facts Static attraction is minimized Ultra clean micro-fiber cloth captures debris and other contamination Robust cloth does not fray or leave fibrous material behind Reduces the number of field and test issues caused by contaminated end faces High-end cost effective cleaning solution The OPTIPOP R dry cloth cassette cleaners offered by Tyco Electronics utilize a densely woven micro-fiber cloth that cleans fiber optic connector tips while reducing static charge. This makes them one of the most advanced cleaning systems available for optical connector cleaning. Applications A variety of reel cleaner configurations allow for use on the major optical connector types including FC, SC, ST, LC, MU, ODVA conforming, MT-RJ, and MPO. Product Dimensions Length -- 127 mm [5.00 in.] Width -- 83 mm [3.26 in.] Thickness -- 48 mm [1.89 in.] Weight -- 150 g [0.33 lb.] Reel Cleaner Refill (Six per Pack) Part Number 1918806-1 OPTIPOP is a trademark of NTT Advanced Technology Corporation. Description MPO w/pins reel cleaner One slot reel cleaner; 1.25 mm, 2.5 mm, MT No Pins MT-RJ plug w/pins reel cleaner Two slot reel cleaner; 1.25 mm and 2.5 mm Reel cleaner refill (six per pack) Part Number 1918802-1 1918803-1 1918804-1 1918805-1 1918806-1 Note: All part numbers are RoHS compliant. 96 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Tooling (Continued) Connectors/Adapters/ Tooling & Accessories OPTIPOP C Card Cleaner Product Facts Static attraction is minimized Ultra clean micro-fiber cloth captures debris and other contamination Robust cloth does not fray or leave fibrous material behind Reduces the number of field and test issues caused by contaminated end faces Compact size The compact OPTIPOP C dry cloth card cleaner offered by Tyco Electronics utilizes a densely woven micro-fiber cloth that cleans fiber optic connector tips while reducing static charge. This makes it one of the most advanced cleaning systems available for optical connector cleaning. Applications The card cleaner can be used on major optical connector types including FC, SC, ST, LC, MU, LC, ODVA, MT-RJ*, and MPO*. *Without guide pins installed. Card Cleaner Refill (Ten per Pack) Part Number 1918811-1 1 Product Dimensions Length -- 120 mm [4.72 in.] Width -- 57 mm [2.24 in.] Thickness -- 16 mm [0.63 in.] Weight -- 60 g [0.13 lb.] OPTIPOP is a trademark of NTT Advanced Technology Corporation. Description Fiber connector card cleaner Card cleaner refill (ten per pack) Part Number 1918810-1 1918811-1 NEOCLEAN Stick Cleaner Product Facts 2.5 mm Perforated handle for customizing length and angle Ultra clean micro-fiber cloth captures debris and other contamination while minimizing static attraction Robust cloth does not fray or leave fibrous material behind Reduces the number of field and test issues caused by contaminated end faces Convenient packaging 1.25 mm The NEOCLEAN dry cloth stick cleaners offered by Tyco Electronics utilize a densely woven micro-fiber cloth that cleans fiber optic connector tips while reducing static charge. This makes them one of the most advanced cleaning systems available for bulkhead optical connector cleaning. Applications The stick cleaners can be used on major single fiber optical connector types inside bulkhead adapters including FC, SC, ST, LC, MU, LC ODVA, and MT-RJ Jacks in addition to transceivers and lenses. Product Dimensions Part Number 1918807-1 2.5 mm Stick Cleaner Overall Length -- 151.2 mm [5.95 in.] Tip Diameter -- 1.25 mm [0.049 in.] Handle Diameter -- 2.65 mm [0.104 in.] Tip Length -- 12.6 mm [0.496 in.] Part Number 1918808-1 1.25 mm Stick Cleaner Overall Length -- 151.2 mm [5.95 in.] Tip Diameter -- 2.5 mm [0.098 in.] Handle Diameter -- 2.65 mm [0.104 in.] Tip Length -- 20.0 mm [0.787 in.] NEOCLEAN is a trademark of NTT Advanced Technology Corporation. Note: All part numbers are RoHS compliant. 97 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Tooling (Continued) Hand Tools PRO-CRIMPER III Hand Tool PRO-CRIMPER III Hand Tool Connector FSMA ST Ceramic ST Stainless Steel ST Polymer Composite ST Ceramic Used with Loose Tube ST Stainless Steel (504XXX series only) SC/FC (Polymer crimp body) SC, FC (Metal crimp body) SC/FC (Metal crimp body) FSD - Ceramic FSD - Polymer FSD/MC - Ceramic FSD Breakout Kit LIGHTCRIMP Plus and LIGHTCRIMP ST LIGHTCRIMP Plus and LIGHTCRIMP SC LIGHTCRIMP Plus LC MT-RJ Plug LC Instruction Sheet 408-4020 http://www.tycoelectronics.com/documents Cable Jacket Diameter (mm) 3.0 3.0 3.0 3.0 3.8 3.0 3.0 2.4 & 3.0 1.6-2.0, 2.4 3.0 DUALAN & LDD DUALAN & LDD DUALAN & LDD DUALAN & Protection Kit 3.0 3.0 1.6 - 2.0 1.8 3.0, 2-4, 1.6-2.0 Part Number Hand Tool Only 58532-1 58532-1 58532-1 58532-1 58532-1 58532-1 58532-1 58532-1 58532-1 58532-1 58532-1 58532-1 58532-1 58532-1 58532-2 58532-2 58532-2 58532-1 58532-1 Hand Tool w/ Die Set 58551-1 58433-4 58433-4 58433-4 -- 58551-1 503911-1 492026-1 1588176-1 -- 58519-1 58519-1 58519-1 58519-1 492623-1 492782-1 1754137-1 1278632-1 1588176-1 Die Set Only 58552-1 (hex die) 58424-1 58424-1 58424-1 503890-1 58552-1 503910-1 492025-1 1588175-1 492131-1 58510-1 58510-1 58510-1 58510-1 492622-1 492783-1 1754136-1 1278627-1 1588175-1 Polishing Bushing, Curing Sleeves and Strip Card Kits Connector FSMA ST Ceramic, Stainless Steel Polymer Composite FC SC LC FSD - Ceramic & Polymer DUALAN & LDD Cable Jacket Diameter (mm) 3.0 3.0 3.0 3.0 3.0 Polishing Bushing 228025-1 Part Number Curing Sleeves/Pieces 502249-1 (12 pcs.) 502259-1 (12 pcs.) 502259-1 (12 pcs.) 502862-2 (6 pcs.) 502656-1 (1 pc.) 1457630-X1 (12 pcs.) 502023-1** Strip Card Kit 501818-1 501818-1 501818-1 1754636-1 1754636-1 1588756-1 501818-1 503337-1 (Metal) 503304-1 (Black Polymer) 503304-2 (Beige Polymer) 504862-1 502631-1 (Black Polymer) 1754074-1 (Metal) 1918196-1 (Black Polymer) 501795-1* * Curing Assembly Kit with polishing bushing. ** Curing Assembly Kit without polishing bushing. 1 -1 LC 900 m -2 LC jacketed cable Note: All part numbers are RoHS compliant. 98 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 |
Price & Availability of 501258-8
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |