features ? long insulation distance: 0.4 mm min. ? high current transfer ratio: ctr = 200% typ ? small and thin package half-pitch 4-pin sop, 1.27 mm ? high isolation voltage: 3,000 v r.m.s. ? taping product number ps2861h-1-f3/f4 :3 500 pcs/reel description nec's ps2861h-1 is an optically coupled isolator containing a gaas light emitting diode and an npn silicon phototran - sistor. this is a half-pitch sop (small out-line package) for high density mounting surface mountable applications. this is ideal for implementing highly isolated interface, 3kvrms in accordance with international safety standards. ps2861h-1 nec's high isolation voltage 4-pin sop optocoupler ? switching mode power supply ? modem, fax and telephone ? data interface of different potentials preliminary data sheet part number ps2861h-1 symbols parameters units min typ max diode v f forward voltage, i f = 5 ma v 1.15 1.4 i r reverse current, v r = 5 v a 5 c t junction capacitance, v= 0, f = 1 mhz pf 15 transistor i ceo collector to emitter dark current, i f = 0 ma, v ce = 40 v na 100 coupled v eco(sat) collector saturation voltage, i f = 5 ma, i c = 2 ma v 0.3 ctr current transfer ratio, i f = 5 ma, v ce = 5 v % 50 200 400 ctr current transfer ratio, i f = 1 ma, v ce = 5 v % 25 135 270 r i-o isolation resistance, v i-o = 1 k v dc 10 11 c i-o isolation capacitance, v = 0 v, f = 1 mhz pf 0.4 t r rise time, v cc = 5 v, i c = 2 ma, r l = 100 s 4 t f fall time, v cc = 5 v, i c = 2 ma, r l = 100 s 6 electrical characteristics (t a = 25c, unless otherwise specifed) application date published: july 17, 2006 the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version.
absolute maximum ratings 1 (t a = 25c) notes: 1. operation in excess of any one of these parameters may result in permanent damage. 2. pw = 100 s, duty cycle = 1%. 3. ac voltage for 1 minute at t a = 25 c, rh = 60 % between input and ouput. part number symbols parameters rating unit diode v f forward voltage 50 ma i r reverse current 6 v p d power dissipation 60 mw transistor p d / o c power dissipation derating 0.6 mw/ o c coupled i fp peak forward current 2 0.5 a v ceo collector to emitter voltage 40 v v eco emitter to collector voltage 5 v i c collector current 40 ma p c power dissipation 120 mw p c / o c power dissipation derating 1.2 mw/ o c bv isolation voltage 3 3,000 v r.m.s. p t total power dissipation 170 mw t a operating temperature -55 to 100 o c t stg storage temperature -55 to 150 o c life support applications these nec products are not intended for use in life support devices, appliances, or systems where the malfunction of these prod ucts can reasonably be expected to result in personal injury . the customers of cel using or selling these products for use in such applications do so at their own risk and agree to fully indemnify cel for all damages resulting from such improper use or sale. a business partner of nec co m p ound semiconductor devices, ltd. 2.70.3 pin connection (t op v iew) 1. anode 2. cathode 3. emitter 4. collector 1.27 0.10.1 2.0 +0.3 -0.2 0.40.1 1 4 3 2 7.00.3 0.50.3 0.15 4.4 +0.1 -0.05 ps2861h-1 ps2861h-1 outline dimensions (units in mm) part number package packing style a pplication p art number ps2861h-1 4-pin sop magazine case 100 pcs ps2861h-1 ps2861h-1-f3 embossed tape 3500 pcs/reel ps2861h-1-f4 ordering information (solder contains lead) part number package packing style a pplication p art number PS2861H-1-A 4-pin sop magazine case 100 pcs ps2861h-1 ps2861h-1-f3-a embossed tape 3500 pcs/reel ps2861h-1-f4-a ordering information (pb-free)
4590 patrick henry drive santa clara, ca 95054-1817 telephone: (408 ) 9 19-250 0 facsimile : ( 40 8 ) 988-0279 subject: compliance with eu directives cel certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of european union (eu) directive 2002/95/ec restriction on use of hazardous substance s i n electrical and electronic equipment (rohs) and the requirements of eu directive 2003/11/ec restriction on penta and octa bde. cel pb-free products have the same base part number with a suffix added. the suffix ?a indicates that the device is pb-free. the ?az suffix is used to designate devices containing pb which are exempted from the requirement of rohs directive (*). in all cases the devices have pb-free terminals. all devices with these suffixes meet the requirements of the rohs directive. this status is based on cel?s understanding of the eu directives and knowledge of the materials that go into its products as of the date of disclosure of this information . restricted substanc e per rohs concentration limit per rohs (values are not yet fixed) concentration contained in cel devices -a -a z lead (p b) < 1000 ppm not detected (*) mercury < 1000 ppm not detected cadmiu m < 100 ppm not detected hexavalent chromiu m < 1000 ppm not detected pbb < 1000 ppm not detected pbde < 1000 ppm not detected if you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. important information and disclaimer: informatio n p rovided by ce l o n its website or in other communications concertin g the substan ce content of its products represents knowledge and belief as of the date that it is provided. cel bases its know ledge and belief on informatio n provided by thir d p arties and makes no representation or warrant y as to the accura cy of such information. efforts are underw ay t o better integrate information from third parties. cel has taken and continues to take reasonable steps to provide representative and ac curate information but ma y not have conducted destructive testing or chemical analysis on incoming ma terials and chemicals. cel and ce l suppliers consider certain information to be propri etar y, and thus cas numbers and other limited information may not be availabl e for release . in no event shall cel?s liability arising out of such information exceed the total purchase price of the cel part(s) at issue s ol d b y cel to customer on an annual basis. see cel terms and conditions for additional clarification of wa rranties and liabilit y.
|
