View PS7341L-1A-E5-A_1188127.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

6-pin dip, high isolation voltage 400 v break down voltage normally open type 1-ch optical coupled mos fet solid state relay ocmos fet ps7341-1a,ps7341l-1a ? nepoc series ? description t he ps7341-1a and ps7341l-1a are solid stat e relay s containing gaas leds on the light emitting side (input side) and mos f e t s on the output side. t hey are suitable for analog signal control bec ause of their low offset and high linearity . t he ps7341l-1a has a surface mount ty pe lead. features ? high isolation voltage (bv = 3 750 vr.m.s.) ? 1 channel ty pe (1 a output) ? low led operating current (i f = 2 ma) ? designed for ac/dc sw itching line changer ? small package (6-pin dip) ? low offset voltage ? ordering number of taping product : ps7341l-1a-e3, e4: 1 000 pcs/reel ? pb-f ree product ? safety standards ? ul approved: f ile no. e72422 ? bsi approved: no. 8252/8253 ? csa approved: no. ca 101391 ? semko approved: no. 606398 ? demko approved: no. 309836 ? nemko approved: no. p00100964 ? f i mko approved: no. f i 15188 ? din en60747-5-2 (vde0884 pa rt2) approved (option) applications ? exchange equipment ? measurement equipment ? f a /oa equipment the mark show s major revised points. the revised points can be easily searched by copy ing an "" in the pdf file and spec ify i ng it in the "find w hat:" field. document no. pn10306ej02v0ds (2nd edition) date published september 2006 ns cp(k) 1996, 2006
ps7341-1a,ps7341l-1a package dimensions (in millimeters) 9.25?.5 3.5 ?.3 4.15 ?.3 3.3 ?.3 0.5?.1 2.54 1.34?.1 0.25 m 0 to 15? 7.62 6.5?.5 9.25?.5 6.5?.5 0.10 +0.10 ?.05 0.9?.25 9.60?.4 3.5 ?.3 1.34?.1 0.25 m 2.54 ps7341-1a ps7341l-1a 1. led anode 2. led cathode 3. nc 4. mos fet drain 5. mos fet source 6. mos fet drain 123 65 4 top view 1. led anode 2. led cathode 3. nc 4. mos fet drain 5. mos fet source 6. mos fet drain 123 65 4 top view data sheet pn10306ej02v0ds 2
ps7341-1a,ps7341l-1a marking example no. 1 pin mark ps7341-1a nl601 country assembled type number assembly lot 6 01 year assembled (last 1 digit) l n rank code in-house code (l: pb-free) week assembled data sheet pn10306ej02v0ds 3
ps7341-1a,ps7341l-1a ordering information part number order number solder plating specification packing sty l e safety standard approval application part number *1 p s 7 3 4 1 - 1 a p s 7 3 4 1 - 1 a - a p b - f r e e magazine case 50 pcs standard products ps7341-1a ps7341l-1a ps7341l-1a-a (ul, bsi, csa, semko, p s 7 3 4 1 l - 1 a - e 3 p s 7 3 4 1 l - 1 a - e 3 - a embossed t ape 1 000 pcs/reel demko, nemko, p s 7 3 4 1 l - 1 a - e 4 p s 7 3 4 1 l - 1 a - e 4 - a fimko a p p r o v e d ) *1 f o r the application of the safety st andard, follow i ng part number should be used. data sheet pn10306ej02v0ds 4
ps7341-1a,ps7341l-1a absolute maximum ratings (t a = 25 c, unless otherw ise specified) p a r a m e t e r s y m b o l r a t i n g s u n i t diode forw ard current (dc) i f 5 0 m a r e v e r s e v o l t a g e v r 5 . 0 v p o w e r d i s s i p a t i o n p d 5 0 m w peak forw ard current *1 i fp 1 a mos fet break dow n voltage v l 4 0 0 v continuous connection a i l 1 5 0 m a l o a d current *2 connection b 2 0 0 c o n n e c t i o n c 3 0 0 pulse load current *3 (ac/dc connection) i lp 3 0 0 m a p o w e r d i s s i p a t i o n p d 5 6 0 m w isolation voltage *4 b v 3 7 5 0 v r . m . s . total pow e r dissipation p t 6 1 0 m w operating ambient temperature t a ? 40 to +85 c storage temperature t st g ? 40 to +125 c *1 pw = 100 s, duty cy cle = 1% *2 conditions: i f 2 ma. t he follow i ng ty pes of load connections are available. connection a v l (ac/dc) 1 6 25 4 3 i l l connection b connection c 1 6 2 5 4 3 i l l v l (dc) + 1 6 2 5 4 3 i l i l l v l (dc) + 1 6 2 5 4 3 i l l v l (dc) + i l + i l *3 pw = 100 ms, 1 shot *4 ac voltage for 1 minute at t a = 2 5 c, rh = 60% betw een input and output pins 1-3 shorted together , 4-6 shorted together. data sheet pn10306ej02v0ds 5
ps7341-1a,ps7341l-1a recommended operating conditions (t a = 25 c) p a r a m e t e r s y m b o l m i n . ty p . m a x . u n i t led operating current i f 2 1 0 2 0 m a led off voltage v f 0 0 . 5 v electrical characteristics (t a = 25 c) p a r a m e t e r s y m b o l c o n d i t i o n s m i n . ty p . m a x . u n i t d i o d e f o r w ard v o l t a g e v f i f = 10 ma 1.2 1.4 v r e v e r s e c u r r e n t i r v r = 5 v 5.0 a m o s f e t off-state leakage current i lof f v d = 400 v 0.03 1.0 a o u t p u t c a p a c i t a n c e c out v d = 0 v, f = 1 mhz 65 pf coupled led on-state current i fo n i l = 150 ma 2.0 ma o n - s t a t e r e s i s t a n c e r on1 i f = 10 ma, i l = 10 ma 20 30 ? r on2 i f = 10 ma, i l = 150 ma, t 10 ms 16 25 t u r n - o n ti me *1, 2 t on i f = 10 ma, v o = 5 v, r l = 2 k ? , 0 . 3 5 1 . 0 m s t u r n - o f f ti me *1, 2 t of f p w 10 ms 0.03 0.2 i s o l a t i o n r e s i s t a n c e r i-o v i-o = 1.0 kv dc 1 0 9 ? i s o l a t i o n c a p a c i t a n c e c i-o v = 0 v, f = 1 mhz 1.1 pf *1 t e st circuit for sw itching t i me v l r l i f r in pulse input input monitor monitor v o t on t off 10 % 90 % 0 v o = 5 v 50 % output input *2 t he turn-on time and turn-off time are specified as input-pulse w i dth 10 ms. be aw are that w hen the devic e operates w i th an input-pulse w i dth less than 10 ms, the turn-on time and turn-off time w ill increase. data sheet pn10306ej02v0ds 6
ps7341-1a,ps7341l-1a typical characteristics (t a = 25c, unless otherw ise specified) f = 1 mhz 20 40 60 80 100 120 200 0 150 100 50 output capacitance vs. output capacitance c out (pf) applied voltage v d (v) load current vs. load voltage load current i l (ma) load voltage v l (v) i f = 10 ma ?.0 ?.0 0 4.0 2.0 ?00 ?00 100 200 off-state leakage current i loff (a) applied voltage v d (v) off-state leakage current vs. applied voltage applied voltage i f = 50 ma 30 ma 20 ma 10 ma 5 ma 1 ma 100 0 ?5 25 50 75 1.0 1.4 1.6 1.8 1.2 0.8 forward voltage v f (v) ambient temperature t a (?c) ambient temperature forward voltage vs. 100 85 75 50 25 0 ?5 20 60 80 100 40 0 maximum forward current i f (ma) ambient temperature t a (?c) maximum forward current vs. ambient temperature 100 85 75 0 ?5 50 25 200 300 100 0 maximum load current i l (ma) ambient temperature t a (?c) maximum load current vs. ambient temperature 500 100 0 200 300 400 10 ? 10 ? 10 ? 10 ? 10 ? 25 ?c t a = 85 ?c remark t he graphs indicate nominal characteristics. data sheet pn10306ej02v0ds 7
ps7341-1a,ps7341l-1a normalized to 1.0 at t a = 25 ?c, i f = 10 ma, i l = 10 ma 0.5 1.5 2.0 3.0 1.0 2.5 0.0 100 75 50 25 ?5 0 normalized on-state resistance vs. normalized on-state resistance r on ambient temperature t a (?c) n = 50 pcs, i f = 10 ma, i l = 10 ma 20 21 0 5 10 15 20 25 30 on-state resistance distribution number (pcs) on-state resistance r on ( ? ) 0.3 0.4 0 5 10 15 20 25 30 number (pcs) turn-on time t on (ms) turn-on time distribution n = 50 pcs, i f = 10 ma, v o = 5 v n = 50 pcs, i f = 10 ma, v o = 5 v 0.03 0.05 0 5 10 15 20 25 30 number (pcs) turn-off time t off (ms) turn-off time distribution ambient temperature v o = 5 v 30 25 20 15 10 5 2 6 8 12 4 10 0 turn-on time t on (ms) forward current i f (ma) turn-on time vs. forward current 30 25 20 15 10 5 0.05 0.15 0.20 0.30 0.10 0.25 0 v o = 5 v turn-off time t off (ms) forward current i f (ma) turn-off time vs. forward current remark t he graphs indicate nominal characteristics. data sheet pn10306ej02v0ds 8
ps7341-1a,ps7341l-1a normalized to 1.0 at t a = 25 ?c, i f = 10 ma, v o = 5 v 100 0 ?5 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 normalized turn-on time t on ambient temperature t a (?c) normalized turn-on time vs. ambient temperature normalized to 1.0 at t a = 25 ?c, i f = 10 ma, v o = 5 v 100 0 ?5 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 normalized turn-off time t off ambient temperature t a (?c) normalized turn-off time vs. ambient temperature remark t he graphs indicate nominal characteristics. data sheet pn10306ej02v0ds 9
ps7341-1a,ps7341l-1a taping specifications (in millimeters) tape direction ps7341l-1a-e3 ps7341l-1a-e4 outline and dimensions (tape) 1.55?.1 2.0?.1 4.0?.1 1.75?.1 4.5 max. 10.4?.1 12.0?.1 1.5 +0.1 ? 7.5?.1 10.3?.1 16.0?.3 4.0 ?.1 0.3 outline and dimensions (reel) packing: 1 000 pcs/reel 330?.0 100?.0 2.0?.5 13.0?.2 r 1.0 21.0?.8 2.0?.5 15.9 to 19.4 outer edge of flange 21.5?.0 17.5?.0 data sheet pn10306ej02v0ds 10
ps7341-1a,ps7341l-1a recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? t i me of peak reflow temperature 10 seconds or less ? t i me of temperature higher than 220 c 60 seconds or less ? t i me to preheat temperature from 120 to 180 c 120 30 s ? number of reflow s t w o ? f l ux rosin flux containing small amount of chlorine (t he flux w i th a maximum chlorine content of 0.2 w t % is recommended.) 220?c package surface temperature t (?c) time (s) (heating) to 10 s to 60 s 260?c max. recommended temperature profile of infrared reflow 120?0 s (preheating) 180?c 120?c (2) wav e soldering ? t e mperature 260 c or below (molten solder temperature) ? t i me 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one ? f l ux rosin flux containing small amount of chlorine (t he flux w i th a maximum chlorine content of 0.2 w t % is recommended.) (3 ) solde r ing by s o lde r ing iron ? peak temperature (l ead part temperature) 350 c or below ? t i me (each pins) 3 seconds or less ? f l ux rosin flux containing small amount of chlorine (t he flux w i th a maximum chlorine content of 0.2 w t % is recommended.) (a) soldering of leads should be made at the poi nt 1.5 to 2.0 mm from the root of the lead. (b) please be sure that the temperatur e of the package w oul d not be heated over 100 c. data sheet pn10306ej02v0ds 11
ps7341-1a,ps7341l-1a (4 ) ca utions ? t o avoid quality degradation, assembling w i thin 1 month afte r take this device out from covered pack is required. (storage conditions 25 c, 65%rh max.) ? f l uxes avoid removing the residual flux w i th freon-based and chlorine-based cleaning solvent. usage cautions 1. protect against static electricity w hen handling. 2. avoid storage at a high te mperature and high humidity . data sheet pn10306ej02v0ds 12
ps7341-1a,ps7341l-1a the information in this document is current as of september, 2006. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use o f such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility o f the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that t h e possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. i f customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" a s used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. " standard" : " special" : " specific" : data sheet pn10306ej02v0ds 13
ps7341-1a,ps7341l-1a caution gaas products this product uses gallium arsenide (g aas). gaas vapor and pow der are hazardous to human health if inhaled or ingested, so please observe the follow i ng points. ? follow related law s and ordinances w hen disposi ng of the product. if there are no applicable law s and/or ordinances, dispose of the product as recommended below . 1. commission a disposal company able to (w it h a license to) collect, transport and dispose of materials that contain arsenic and other such industrial w a ste materials. 2. exclude the product from general industria l w a ste and household garbage, and ensure that the product is controlled (as industrial w a ste subjec t to special control) up until final disposal. ? do not burn, destroy , cut, crush, or chemically dissolve the product. ? do not lick the product or in any w a y allow it to enter the mouth. 0604 nec compound semiconductor de vices hong k ong limited e-mail: contact@ncsd-hk.necel.com hong k ong head office tel: +852-3107-7303 f ax: +852-3107-7309 t aipei br anch office tel: +886-2-8712-0478 f ax: +886-2-2545-3859 k orea br anch office tel: +82-2-558-2120 f ax: +82-2-558-5209 nec electr onics (eur ope) gmbh http://www .eu.necel.com/ tel: +49-211-6503-0 f ax: +49-211-6503-1327 calif ornia eastern laboratories, inc. http://www .cel.com/ tel: +1-408-988-3500 f ax: +1-408-988-0279 compound semiconductor de vices division nec electr onics corporation url: http://www .ncsd.necel.com/ for fur ther inf ormation, please contact

▲Up To Search▲

Price & Availability of PS7341L-1A-E5-A

	To Download PS7341L-1A-E5-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .