website: www.jdsu.com communications test & measurement solutions jdsus smart optical handhelds go beyond the basics with more than 70,000 optical handhelds already in use, jdsu continues the success story with the smart optical handhelds. the smart class help your network move to the next level of performance. jdsus smart optical handhelds encompass a new, intelligent, and next level product line for testing all optical signals and systems, including broad - band, pons, and gigabit ethernet. all of jdsus smart optical handhelds provide: ? an extended number of calibration wavelengths for the highest performance range in the industry. ? the smartstar graphical user interface for fast, easy, and straightforward operation. ? the smartenergy power supply management system.? ? the smartbag for safe and hands-free operation and transport ? traceable measurements to international standards for confdence in accuracy. ? a robust, shock-proof, and splash-proof design for feld operation ? quick start operation, requiring no warm-up time and reducing testing time. the OLA-54 smart optical level attenuator is designed for multimode fiber systems (50/125 m fiber). the ola-55 smart optical level attenuator is a future-proof instrument for system testing, installation, maintenance, and production of singlemode fibers. due to mini - mized differential group delay (dgd), the ola-55 is also suitable for 40 gb/s systems. OLA-54/55 smart optical level attenuator a smart, future-proof optical level attenuator key features ? 50/125 m multimode fber design (OLA-54) ? ready for 40 gb/s systems (ola-55) ? new optical design allowing for low minimum insertion loss ? smartwheel for precise and fast manual setting ? absolute and relative attenuation setting ? fttx ready
2 OLA-54/55 s m a r t optical level attenuator shock-proof design dust cap for the optical interface display (128 x 64 dots) shows up to three results simultane - ously backlight for the display power-on, auto power-of (after 20 min) smart wheel for precise and fast manual setting worldwide compatible ac adapter (snt-121a) ovf-1 visual fault locator (accessory) ock-10 optical connector cleaning kit (accessory) optical adapters (bn 2150) for laser source output
3 OLA-54/55 s m a r t optical level attenuator specifications OLA-54 bn 2280/41 multimode ola-55 bn 2280/01 singlemode bn 2280/21 singlemode apc adjustable wavelength range 750 to 1350 nm in 1 nm increments 1260 to 1650 nm in 1nm increments fiber type 50/125 m 9/125 m calibrated wavelengths 850 nm, 1300 nm 1310 nm, 1550 nm, 1625 nm display range (1) < 2.5 to 55 db 2.0 to 60 db minimum insertion loss (1) < 2.5 db < 2.0 db linearity 0.2 0.2 repeatability of attenuation setting (2) 0.1 db 0.1 db total attenuation accuracy (1) typ. 0.8 db 0.8 db setting type continuous over the entire range continuous over the entire range function bi-directional bi-directional displayed value (1) absolute or relative attenuation value absolute or relative attenuation value max. permitted level +20 dbm +23 dbm (1) including connectors (to iec874-1, method 6), depending on quality of the connectors applied to the ola (2) excluding remating general data display illuminated graphical display, resolution of 128 64 dots results displayed in db backlight function switchable via a separate key connector optical connector interchangeable adapter from bn 2150/00.xx range is suitable for measurements on flat or angled physical contact systems power supply four dry batteries mignon/aa, 1.5 v or nimh rechargeable cells mignon/aa, 1.2 v operating time from dry batteries > 300 h batteries/nicd/nimh power saving: the instrument switches off automatically after ~20 min (function can be disabled) ac line operation via separate ac adapter integrated fast battery charging function (2 hours) external 12 v dc operating via an ac adapter or a 12 v car battery adapter electromagnetic compatibility corresponds to iec 61326 (ce conformance) calibration suggested calibration interval 3 years ambient temperature nominal range of use ? 10c to +55c storage and transport ? 40c to +70c dimensions and weight b h t approximately 95 60 195 mm (3.74 2.36 7.68 in) weight approximately 500 g (1.1 lb)
all statements, technical information and recommendations related to the products herein are based upon infor - mation believed to be reliable or accurate. however, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. te user assumes all risks and liability whatsoever in connec - tion with the use of a product or its applications. jdsu reserves the right to change at any time without notice the design, specifcations, function, ft or form of its products described herein, including withdrawal at any time of a product ofered for sale herein. jdsu makes no representations that the products herein are free from any intellectual property claims of others. please contact jdsu for more information. jdsu and the jdsu logo are trademarks of jds uniphase corporation. other trademarks are the property of their respective holders. ? 2007 jds uniphase corporation. all rights reserved. 30137101 501 1207 smart-ola55.ds.fop.tm.ae test & measurement regional sales north america tel: 1 866 228 3762 fax: +1 301 353 9216 latin america tel:+55 11 5503 3800 fax:+55 11 5505 1598 asia pacific tel:+852 2892 0990 fax:+852 2892 0770 emea tel:+49 7121 86 2222 fax:+49 7121 86 1222 website: www.jdsu.com OLA-54/55 s m a r t optical level attenuator ordering information ordering number instrument bn 2280/01 ola-55 singlemode, variable attenuator, pc bn 2280/21 ola-55 singlemode, variable attenuator, apc bn 2280/41 OLA-54 multimode, variable attenuator, 50/125 m included with the ola-55 2 interchangeable adapter from bn 2150/00.xx (range (must be selected) four dry batteries mignon/aa, 1.5 v operating manual mt-1s belt bag ordering number accessories bn 2150/00.32 optical adapter st type bn 2150/00.58 optical adapter sc type bn 2150/00.51 optical adapter fc type bn 2150/00.50 optical adapter din type bn 2150/00.59 optical adapter lc type bn 2252/01 ovf-1 visual fault locator bn 2229/90.21 ock-10 optical connector cleaning kit bn 2229/90.07 optical cleaning tape bn 2229/90.08 spare tape for optical cleaning tape bn 2237/90.02 nimh cells, mignon/aa, 1.2 v (4 required per instrument) bn 2277/90.01 snt-121a worldwide compatible ac adapter k804 usb connection cable bn 2277/90.02 mt-1s belt bag for one instrument bn 2126/03 mt-2s soft bag for two instruments bn 2126/04 mt-3s soft bag for three instruments bn 2093/31 mk-3s hard case for three instruments bn 2280/90.01 calibration report detailed information regarding test adapters, cables, and fiber optic sleeves can be found in a separate datasheet entitled jdsu fiber optic test adapters and cables.
|
