SCH2102 no.8041-1/4 sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn8041 SCH2102 pnp epitaxial planar silicon transistor switching, driver applications applications ? low-frequency power amplifier, high-speed switching, motor drivers, muting. features ? composite type with 2 pnp transistors contained in a single package, facilitating high-density mounting. ? ultrasmall package permitting applied sets to be small and slim. ? low ron. specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo --15 v collector-to-emitter voltage v ceo --12 v emitter-to-base voltage v ebo -- 5 v collector current i c --500 ma collector current (pulse) i cp --1.0 a collector dissipation p c mounted on a ceramic board (600mm 2 5 0.8mm) 1unit 0.4 w junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =--12v, i e =0 --100 na emitter cutoff current i ebo v eb =--4v, i c =0 --100 na dc current gain h fe v ce =--2v, i c =--10ma 300 700 gain-bandwidth product f t v ce =--2v, i c =--50ma 490 mhz output capacitance cob v cb =--10v, f=1mhz 4 pf collector-to-emitter saturation voltage v ce (sat) i c =--200ma, i b =--10ma --150 --300 mv base-to-emitter saturation voltage v be (sat) i c =--200ma, i b =--10ma --0.9 --1.2 v collector-to-base breakdown voltage v (br)cbo i c =--10 m a, i e =0 --15 v collector-to-emitter breakdown voltage v (br)ceo i c =--1ma, r be = --12 v emitter-to-base breakdown voltage v (br)ebo i e =--10 m a, i c =0 --5 v marking : ef continued on next page. any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. d1004ea ts im ta-100994
SCH2102 no.8041-2/4 continued from preceding page. ratings parameter symbol conditions min typ max unit turm-on time t on see specified test circuit. 30 ns storage time t stg see specified test circuit. 57 ns fall time t f see specified test circuit. 15 ns package dimensions electrical connection unit : mm 2237 switching time test circuit 0 0 --200 --0.5 --20 --40 --60 --80 --100 --120 --140 --160 --180 0 --200 --600 --300 --400 --500 --100 --1.0 --2.0 --1.5 it05201 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 it05202 --1.0ma --0.7ma --0.5ma --0.6ma --0.4ma --0.3ma --0.2ma --0.1ma i b =0 --0.9ma --0.8ma v ce = --2v 25 c --25 c ta=75 c i c -- v ce i c -- v be collector-to-emitter voltage, v ce -- v collector current, i c -- ma base-to-emitter voltage, v be -- v collector current, i c -- ma 1 : emitter1 2 : base1 3 : collector2 4 : emitter2 5 : base2 6 : collector1 sanyo : sch6 1.6 1.6 1.5 0.05 0.5 0.05 0.56 0.25 0.2 0.2 1 3 2 64 5 v r r b v cc = --5v v be =5v ++ 50 input output r l 220 f 470 f pw=20 s i b1 d.c. 1% i b2 i c =20i b1 = --20i b2 = --400ma 5 6 1 4 23 1 : emitter1 2 : base1 3 : collector2 4 : emitter2 5 : base2 6 : collector1 top view
SCH2102 no.8041-3/4 --1.0 5 3 100 1000 7 5 3 2 --1000 --100 27 5 3 27 5 3 27 --10 it05208 27 35 --10 23 --1.0 27 35 --0.1 10 1.0 2 3 7 5 2 3 5 it05207 it05206 --1.0 357 --10 2357 2357 2 --100 --1000 --10 --1.0 --0.1 7 5 3 2 7 5 3 2 it05205 --1.0 --100 --10 23 57 23 57 23 57 --100 --1000 --10 7 5 3 2 --1000 7 5 3 2 i c / i b =50 ta=75 c 25 c --25 c ta= --25 c 25 c 75 c i c / i b =20 v ce = --2v f=1mhz f=1mhz --0.1 it06068 2 0.1 7 5 3 2 1.0 7 5 3 10 3 2 57 3 2 57 --1.0 --10 out in 1k 1k i b 100 200 300 400 500 0 0 20 40 60 80 100 120 140 160 ambient temperature, ta -- c p c -- ta collector dissipation, p c -- mw it06712 mounted on a ceramic board (600mm 2 5 0.8mm) 1unit f t -- i c cob -- v cb v be (sat) -- i c v ce (sat) -- i c collector current, i c -- ma gain-bandwidth product, f t -- mhz collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- ma base-to-emitter saturation voltage, v be (sat) -- v base current, i b -- ma ron -- i b on-resistance, ron -- w --1.0 23 57 23 57 23 57 --10 --100 2 7 3 5 7 100 1000 --100 --10 2 3 5 7 --1000 2 3 5 7 --1000 it05203 it05204 --1.0 23 57 23 57 23 57 --10 --100 --1000 v ce = --2v --25 c ta=75 c 25 c i c / i b =20 ta=75 c 25 c --25 c h fe -- i c v ce (sat) -- i c collector current, i c -- ma dc current gain, h fe collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- mv
SCH2102 no.8041-4/4 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of december, 2004. specifications and information herein are subject to change without notice. ps
|
