j-1 j pc configurable infrared temperature sensor for demanding applications os150-2usb series optional ? u short-wavelength measurement for low emissivity targets such as steel rollers and other metal surfaces, even at low temperatures u configurable temperature range, emissivity setting and more, using a pc via omega ? software and usb cable (supplied) u features max, min, average and instantaneous readings; peak or valley hold; reflected energy compensation u opc server capabilities u temperature ranges from 45 to 2000c (113 to 3632of) u emissivity: 0.1 to 1.0 u stainless steel housing, sealed to ip65 u field of view: 15:1, 25:1, 75:1 or close focus u selectable 0 to 20 ma or 4 to 20 ma output u optional air/water cooled housing, air purge collar, laser sighting tool and mounting brackets the os150-2usb series of infrared pyrometers measures temperatures from 45 to 2000c (113 to 3632of) accurately and consistently, with an outstanding response time of 240 ms. the selectable 0 to 20 ma or 4 to 20 ma output is compatible with almost any indicator, controller, recorder, data logger etc. without the need for special interfacing or signal conditioning. all os150-2usb series sensors are fully configurable from a pc using the omega software and usb cable supplied. this user friendly software enables the user to set the temperature range and emissivity setting compensates for reflected energy; apply filtering; select max, min, average or instantaneous readings; and configure peak or valley hold processing. these features can also be monitored and adjusted by an opc client. other features include data acquisition, alarms and a scrolling graphical display. the sensor will operate with the 4 to 20 ma cable connected, the usb cable connected, or both. the usb cable has an ip65 connector at the sensor end. an ip65 cap protects the sensor when the usb cable is not connected. ? for nist calibration ordering information see accessories chart. OS151-2USB-LT shown smaller than actual size. compact stainless steel ip65 housing. www.datasheet.co.kr datasheet pdf - http://www..net/
j-2 specifications temperature range: lt (os151 only): 45 to 300c (113 to 572of) mt: 250 to 1000c (482 to 1832of) ht: 450 to 2000c (842 to 3632of) field-of-view: os151 only: 15:1 os251: 25:1 os751: 75:1 (os751) os801: 7.5 dia. at 500 mm output: selectable 4 to 20 ma or 0 to 20 ma (linear with temperature) configuration: via pc port conforming to usb 2.0 accuracy*: 1% of reading or 2c, whichever is greater repeatability*: 0.5% of reading or 0.5c, whichever is greater * emissivity = 1.0, object temperature > sensor temperature + 20c emissivity setting: 0.1 to 1.0 response time, t90: 240 ms (90% response) spectral range: 2.0 to 2.4 m supply voltage: 24 vdc (26 vdc max) sensor voltage: 11 vdc min max loop impedance: 900 at 24 vdc maximum span: full temperature range up to 1550c (2822of) minimum span: 100c (212of) mechanical construction: stainless steel dimensions: 25 d x 106.5 mm l (0.98 x 419") thread mounting: m20 x 1 mm pitch weight with output cable: 175 g (6.17 oz) output cable length: 1 m (3.3') usb cable length: 1 m (3.3') environmental environmental rating: ip65 ambient temperature: 0 to 70c (32 to 158of) relative humidity: 95% max non-condensing +- - + red red blue green power supply power supply - + pc pc n/c usb usb +- display/ controller display/ controller ye llow green blue ye llow +- - + red red blue green power supply power supply - + pc pc n/c usb usb +- display/ controller display/ controller ye llow green blue ye llow 15 60 135 0.6 2.4 5.3 0 59.1 118.1 0 15003 000 distance: sensor to object (inches) distance: sensor to object (inches) distance: sensor to object (inches) distance: sensor to object (inches) distance: sensor to object (mm) distance: sensor to object (mm) distance: sensor to object (mm) distance: sensor to object (mm) 15 100 215 0.6 3.9 8.5 0 59.1 59.1 118.1 118.1 0 1500 3000 0 1500 3000 d:s 25:1 d:s 15:1 15 20 55 0.6 0.8 2.2 0 d:s 75:1 15 7.5 30 0.6 0.3 1.2 0 19.7 39.4 0 500 1000 spot dia (in) spot dia (mm) spot dia (in) spot dia (mm) spot dia (in) spot dia (mm) spot dia (in) spot dia (mm) os151 os251 os751 os801 15 60 135 0.6 2.4 5.3 0 59.1 118.1 0 15003 000 distance: sensor to object (inches) distance: sensor to object (inches) distance: sensor to object (inches) distance: sensor to object (inches) distance: sensor to object (mm) distance: sensor to object (mm) distance: sensor to object (mm) distance: sensor to object (mm) 15 100 215 0.6 3.9 8.5 0 59.1 59.1 118.1 118.1 0 1500 3000 0 1500 3000 d:s 25:1 d:s 15:1 15 20 55 0.6 0.8 2.2 0 d:s 75:1 15 7.5 30 0.6 0.3 1.2 0 19.7 39.4 0 500 1000 spot dia (in) spot dia (mm) spot dia (in) spot dia (mm) spot dia (in) spot dia (mm) spot dia (in) spot dia (mm) os151 os251 os751 os801 15 60 135 0.6 2.4 5.3 0 59.1 118.1 0 15003 000 distance: sensor to object (inches) distance: sensor to object (inches) distance: sensor to object (inches) distance: sensor to object (inches) distance: sensor to object (mm) distance: sensor to object (mm) distance: sensor to object (mm) distance: sensor to object (mm) 15 100 215 0.6 3.9 8.5 0 59.1 59.1 118.1 118.1 0 1500 3000 0 1500 3000 d:s 25:1 d:s 15:1 15 20 55 0.6 0.8 2.2 0 d:s 75:1 15 7.5 30 0.6 0.3 1.2 0 19.7 39.4 0 500 1000 spot dia (in) spot dia (mm) spot dia (in) spot dia (mm) spot dia (in) spot dia (mm) spot dia (in) spot dia (mm) os151 os251 os751 os801 15 60 135 0.6 2.4 5.3 0 59.1 118.1 0 150 03 000 distance: sensor to object (inches) distance: sensor to object (inches) distance: sensor to object (inches) distance: sensor to object (inches) distance: sensor to object (mm) distance: sensor to object (mm) distance: sensor to object (mm) distance: sensor to object (mm) 15 100 215 0.6 3.9 8.5 0 59.1 59.1 118.1 118.1 0 1500 3000 0 1500 3000 d:s 25:1 d:s 15:1 15 20 55 0.6 0.8 2.2 0 d:s 75:1 15 7.5 30 0.6 0.3 1.2 0 19.7 39.4 0 500 1000 spot dia (in) spot dia (mm) spot dia (in) spot dia (mm) spot dia (in) spot dia (mm) spot dia (in) spot dia (mm) os151 os251 os751 os801 sensor connection note: the sensor must be grounded at only one point, either the cable shield or the sensor housing. diameter of target spot measured versus distance from sensing head. www.datasheet.co.kr datasheet pdf - http://www..net/
j-3 j to order visit omega.com/os150-2usb for pricing and details model no. temperature range optics OS151-2USB-LT 45 to 300oc (113 to 572of) 15:1 os251-2usb-mt 250 to 1000oc (482 to 1832of) 25:1 os251-2usb-ht 450 to 2000oc (842 to 3632of) 25:1 os751-2usb-mt 250 to 1000oc (482 to 1832of) 75:1 os751-2usb-ht 450 to 2000oc (842 to 3632of) 75:1 os801-2usb-mt 250 to 1000oc (4823 to 1832of) close-focus (7.5 mm dia. measurement spot at 500 mm distance) optics os801-2usb-ht 450 to 2000oc (842 to 3632of) close-focus (7.5 mm dia. measurement spot at 500 mm distance) optics comes complete with sensor head, 1 m (3.3') cable, usb cable, software, and operators manual. ordering examples: OS151-2USB-LT, pc configurable ir sensor with 15:1 optics. os251-2us-mt-wc, pc configurable ir sensor with 25:1 optics with water cooled jacket. model no. description osusb-fbl fixed bracket for ir usb osusb-abl adjustable bracket for ir usb osusb-apl air purge collar for ir usb osusb-lstl laser sighting tool for ir usb cal-3-ir ? nist-traceable calibration accessories model no. description psr-24s regulated power supply, us plug, 90 to 264 vac input, 24 vdc output, 400 ma, screw terminals, ul psr-24l regulated power supply, us plug, 90 to 264 vac input, 24 vdc output, 400 ma, stripped leads, ul psr-24l-230 regulated power supply, european plug, 230 vac input, 24 vdc output, 400 ma, stripped leads, ce tx8-100 power/output cable, 30 m (98') power supplies osusb-lstl osusb-fbl osusb-apl osusb-abl all models shown smaller than actual size. fixed mounting bracket the l-shaped fixed mounting bracket offers a rigid support for the sensor and allows fine adjustment in a single plane. adjustable mounting bracket the adjustable mounting bracket consists of a fixed mounting bracket plus another l-shaped bracket. when assembled as shown the adjustable mounting bracket offers a rigid support for the sensor and allows fine adjustment in two planes. air purge collar the air purge collar is used to keep dust, fumes, moisture and other contaminants away from the lens. air flows into the fitting on the side and out of the aperture at the front. laser sighting tool the laser sighting tool screws onto the front of the sensor during installation and indicates precisely where the sensor is aiming. once the sensor has been aimed at the centre of the target and locked in position the laser sighting tool can be removed. the laser is activated by means of a push button on the front of the tool which has a latching mechanism. suffix description -wc air/water cooled jacket (includes air purge collar) -2.2ce(*) cable extended, for uncooled ir usb series, 30 m (98') max total cable length options (not field installable) * 1 m (3.3') cable is included as standard on every sensor. extended cable is added to that length, add suffix to model number. insert cable length in meters. extended wa rranty program sm omegacare sm extended warranty program is available for models shown on this page. ask your sales representative for full details when placing an order. omegacare sm covers parts, labor and equivalent loaners. www.datasheet.co.kr datasheet pdf - http://www..net/
|
