.079 - .000 + .004 2.00 0.00 + 0.10 .315 - .000 + .004 8.00 0.00 + 0.10 .276 - .000 + .008 7.00 0.00 + 0.20 r .016 0.40 (4x) .165 [4.20] .244 [6.20] .07 [1.8] a released for production, co 200114 sk 01/30/08 .433 - .008 + .000 11.00 - 0.20 0.00 .315 - .008 + .000 8.00 - 0.20 0.00 .118 3.00 .18 4.5 .51 13.0 ref .14 3.5 .19 5.0 ref .591 15.00 .276 - .008 + .000 7.00 - 0.20 0.00 .118 3.00 .106 2.70 r .020 .002 0.50 0.05 .205 - .008 + .000 5.20 - 0.20 0.00 .205 - .008 + .000 5.20 - 0.20 0.00 r .04 max. 1.0 recommended striker (not supplied) .118 3.00 notes: 1. plastic component material: acetal (rms-121) 2. color: black. 3. spring material: stainless steel (rms-280) 4. case insertion force: 1 kg (2.2 lbs) 5. case holding force: 7 kg (15.4 lbs) 6. approximate locking stroke: .21 [5.4] 7. approximate release stroke: .05 [1.3] 8. locking stroke force: 500 g 200 g [16 oz 6.3 oz] 9. retention force (locked): 1 kg min [32.2 oz] 10. continuous working temperature: -10 to 60c [14 to 140f] 11. storage temperature: -40 to 80c [-40-176f] 12. life cycle: 50 000 operations audible lock and release. supplied in released position. all values for reference only. these edges must be sharp locked position .02 x 45 [0.5 x 45] chamfer recommended mounting hole re: file #: sheet: rev. description engr. date title: part # dwn: dt: sheet size: richco, inc. 1 of 1 DL-1X b door latch app: chkd: richco, inc. (773) 539-4060 eng@richco-inc.com 01/28/08 s.j. s.k. s.j. final dwg in in [mm] DL-1X print type a c tolerances unless noted .xx=.010 .xxx=.005 frac.=1/64 ang.=1 created using solidworks
|