unisonic technologies co., ltd up9t15g power mosfet www.unisonic.com.tw 1 of 5 copyright ? 2008 unisonic technologies co., ltd qw-r502-208.a n-channel enhancement mode power mosfet ? description the up9t15g l uses advanced trench technology to provide excellent r ds(on) , low gate charge and operation with low gate voltages. this device is suitable for use as a load switch or in pwm applications. ? features * v ds (v)=20v * i d =12 .5a (v gs =4.5v) * r ds(on) <50m ? @ v gs =4.5 v, i d =6 a * r ds(on) <80m ? @ v gs =2.5 v, i d =5.2 a ? symbol 1.gate 3.source 2.drain *pb-free plating product number: up9t15gl ? ordering information ordering number pin assignment normal lead free plating package 1 2 3 packing UP9T15G-TN3-R up9t15gl-tn3-r to-252 g d s tape reel up9t15g-tn3-t up9t15gl-tn3-t to-252 g d s tube
up9t15g power mosfet unisonic technologies co., ltd 2 of 5 www.unisonic.com.tw qw-r502-208.a ? absolute maximum ratings parameter symbol ratings unit drain-source voltage v dss 20 v gate-source voltage v gss 12 v continuous drain current , @ v gs = 4.5v t c =25c i d 12.5 a pulsed drain current i dm 60 a power dissipation t c =25c p d 12.5 w linear derating factor 0.1 w/ junction temperature t j +150 strong temperature t stg -55 ~ +150 note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are st ress ratings only and functional device operation is not implied. ? thermal data parameter symbol min typ max unit junction-to-ambient ja 110 /w junction-to-case jc 10 /w ? electrical characteristics (t j =25c, unless otherwise noted) parameter symbol test conditions min typ max unit off characteristics drain-source breakdown voltage bv dss v gs =0 v, i d =250 a 20 v drain-source leakage current i dss v ds =20 v, v gs =0 v 1 a gate-body leakage current i gss v gs = 12 v 100 na breakdown voltage temperature coefficient bv dss / t j 25 , i d =1ma 0.02 v/ on characteristics gate threshold voltage v gs(th) v ds =v gs , i d =250 a 0.5 1.5 v v gs =4.5 v, i d =6 a 50 static drain-source on-resistance r ds(on) v gs =2.5 v, i d =5.2 a 80 m ? dynamic parameters input capacitance c iss 360 580 pf output capacitance c oss 70 pf reverse transfer capacitance c rss v ds =20 v, v gs =0 v, f=1.0mhz 50 pf switching parameters total gate charge(note2) q g 5 8 nc gate source charge q gs 1 nc gate drain charge q gd v ds =16 v, v gs =4.5 v, i d =10 a 2 nc turn-on delay time(note2) t d(on) 8 ns turn-on rise time t r 55 ns turn-off delay time t d(off) 10 ns turn-off fall-time t f v gs =5 v, v ds =10v,r d =1 ? , i d =10 a , r g =3.3 ? 3 ns source- drain diode ratings and characteristics forward on voltage(note2) v sd i s =10 a,v gs =0v 1.3 v reverse recovery time(note2) t rr 17 ns reverse recovery charge q rr i s =10 a, v gs =0 v,di/dt=100 a/ s 9 nc notes: 1.pulse width limited by safe operating area. 2.pulse width 300us , duty cycle 2%.
up9t15g power mosfet unisonic technologies co., ltd 3 of 5 www.unisonic.com.tw qw-r502-208.a ? typical characteristics drain current,i d (a) drain current,i d (a) on-resistance,r ds(on) (m ) normalized r ds(on) gate threshold voltage,v gs(th) (v) reverse drain current,i s (a)
up9t15g power mosfet unisonic technologies co., ltd 4 of 5 www.unisonic.com.tw qw-r502-208.a ? typical characteristics(cont.) gate to source voltage,v gs (v) capacitance (pf) normalized thermal response (r thjc ) 100 10 1 0.1 1 10 100 maximum safe operating area drain current,i d (a) drain-to-source voltage,v ds (v) 0 100 s 1ms 10ms 100ms dc t c =25 single pulse
up9t15g power mosfet unisonic technologies co., ltd 5 of 5 www.unisonic.com.tw qw-r502-208.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior writ ten consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
