filename: tfs 915d.doc version 1.2 14.12.2006 vi telefilter filter specification tfs 915d 1/5 tele filter gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. measurement condition ambient temperature: 23 c input power level: 0 dbm terminating impedance: input: 50 ? output: 50 ? characteristics remark: the maximum attenuation in the pass band is defined as the insertion loss a e . the nominal frequency f n is fixed at 915,0 mhz wi thout any tolerance or limit. the values of absolute attenuation a abs are guaranteed for the whole operating temperature range. the frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. d a t a typ. value tolerance / limit insertion loss a e 2,7 db max. 3,0 db insertion loss in otr2 - max. 3,5 db nominal frequency f n - 915,0 mhz passband pb 12,5 mhz f n 3,5 mhz absolute attenuation a abs 0,3 mhz ? 880 mhz 44 db min. 40 db 928 mhz ? 935 mhz 34 db min. 16 db 928 mhz ? 935 mhz in otr2 - min. 12 db 935 mhz ? 1900 mhz 43 db min. 40 db input power level max. 10 dbm operating temperature range otr - - 10 c ... + 60 c operating temperature range 2 otr2 - - 40 c ... + 85 c storage temperature range - - 40 c ... + 85 c temperature coefficient of frequency tc f * -37 ppm/k *) ? f(hz) = tc f (ppm/k) x (t-t 0 ) x f to (mhz) generated: checked / approved:
filename: tfs 915d.doc version 1.2 14.12.2006 vi telefilter filter specification tfs 915d 2/5 vi telefilter potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation filter characteristic construction and pin connection (all dimensions in mm) 1 2 3 4 5 6 1,2 max. 0,6 0,75 3,0 +/-0,15 0,6 0,30x0,30 13 6 4 date code 50 ? test circuit l1 saw l 2 2 5 1, 3, 4, 6 915d u50 1 ground 2 input 3 ground 4 ground 5 output 6 ground date code: year + week u 2006 v 2007 w 2008 ... 50 240 430 620 810 1000 1190 1380 1570 1760 1950 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 frequency in mhz magnitude in db 905 907 909 911 913 915 917 919 921 923 925 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 frequency in mhz magnitude in db
filename: tfs 915d.doc version 1.2 14.12.2006 vi telefilter filter specification tfs 915d 3/5 vi telefilter potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation stability characteristics, reliability after the following tests the filter shall meet the whole specification: 1. shock: 500g, 1 ms, half sine wave, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g respecti vely, 1 octave per min, 10 cycles per plan, 3 plans; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 10 cycles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow): reflow possible: three times max.; for temperature conditions refer to the attac hed "air reflow temperature conditions" on page 4; this filter is rohs compliant (2002/95/eg, 2005/618/eg) packing tape & reel: iec 286 ? 3, with exception of value for n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 9000 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao pull off direction pin marker typ date code ko t a c n w 1 w 2 the minimum bending radius is 45 mm. tape (all dimensions in mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 a o : 3,25 0,1 bo : 3,25 0,1 ct : 5,5 0,1 reel (all dimensions in mm) a : 330 w1 : 8,4 +1,5/-0 w2(max) : 14,4 n(min) : 50 c : 13,0 +0,5/-0,2
filename: tfs 915d.doc version 1.2 14.12.2006 vi telefilter filter specification tfs 915d 4/5 vi telefilter potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation air reflow temperature conditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/second > 100c between 300 and 600 seconds > 150c between 240 and 500 seconds > 217c between 30 and 150 seconds peak temperature max. 260c time within 5c of actual peak temperature between 10 and 30 seconds cool-down rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds temperature / c time / s max. 260c 217c 10 ... 30 s 30 ... 150 s max. 300 s chip-mount air reflow profile
filename: tfs 915d.doc version 1.2 14.12.2006 vi telefilter filter specification tfs 915d 5/5 vi telefilter potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@telefilter.com vi telefilter reserves the right to make changes to the produc t(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation history version reason of changes name date 1.0 - generation of development specif ication m.springfeldt 07.06.2004 1.1 - add typical values and filter c haracteristic strehl 30.06.2005 - generation of filter specification 1.2 - add otr2 and change stability characteristics strehl 14.12.2006
|
