features trenchfet power mosfet applications direct logic-level interface: ttl/cmos drivers: relays, solenoids, lamps, hammers, displays, memories, transistors, etc. battery operated systems solid-state relays 1 n-channel16 ? v (d ? s) mosfet product summary v (br) ds s r ds( ) i d (a) v (br) ds s min (v) r ds ( on) max ( ) v gs (th ) (v) DTS03K16 DTS03K16a 16 1.0 @ v gs = 10 v 1 0 to 3 0 0.42 0.64 16 1.4 @ v gs = 4.5 v 1.0 to 3.0 0.35 0.53 absolute maximum ratings (t a = 25 c unless otherwise noted) limit parameter symbol DTS03K16 DTS03K16a unit drain-source v oltage v ds 16 v gate-source v oltage v gs 8 v continuous drain current (t j = 150 c) t a = 25 c i d 0.42 0.64 continuous drain current (t j = 150 c) t a = 70 c i d 0.33 0.51 a pulsed drain current a i dm 0.8 1.5 power dissipation t a = 25 c p d 0.35 0.8 w power dissipation t a = 70 c p d 0.22 0.51 w thermal resistance, junction-to-ambient r thja 357 156 c/w operating junction and storage temperature range t j , t stg ? 55 to 150 c notes a. pulse width limited by maximum junction temperature. g s d to p v ie w 2 3 t o-236 (sot -23) 1 n -channel mosfet g d s dt s , w ww. daysemi.jp
2 specifications (t a = 25 c unless otherwise noted) limits parameter symbol test conditions min typ max unit static drain-source breakdown v oltage v (b r)dss v gs = 0 v , i d = 10 a 16 v gate-threshold v oltage v gs(t h) v ds = v gs , i d = 0.25 ma 1.0 2.0 3.0 v gate-body leakage i gss v ds = 0 v , v gs = 20 v 100 na zero gate voltage drain current i ds s v ds = 16 v , v gs = 0 v 1 a zero gate voltage drain current i ds s v ds = 16 v , v gs = 0 v , t j = 55 c 10 a on state drain current a i d( ) v ds = 10 v v gs = 10 v DTS03K16 0.5 a on-state drain current a i d( on) v ds = 10 v , v gs = 8 v DTS03K16a 0.8 a drain - source on - resistance a r ds( on) v gs = 4.5 v , i d = 0.1 a 0.8 1.4 drain - so u rce on - resistance a r ds( on) v gs = 10 v , i d = 0.3 a 0.47 1.0 forward t ransconductance a g fs v ds = 10 v , i d = 0.3 a 550 ms diode forward v oltage v sd i s = 0.3 a, v gs = 0 v 0.85 1.2 v dynamic b t otal gate charge q g 1000 1500 gate-source charge q gs v ds = 16 v , v gs = 10 v i d 0.3 a 205 pc gate-drain charge q gd i d 0 . 3 a 200 gate resistance r g 48 t urn on time t d( on) 4.5 8 t urn-on t ime t r v dd = 15 v , r l = 50 i d 03 a v ge n = 10 v 8 15 ns t urn - of f time t d( of f) i d 0.3 a , v ge n = 10 v r g = 6 9 15 ns t urn- of f ti me t f 6.3 12 notes a. pulse test: pw 300 s duty cycle 2%. b . guaranteed by design, not subject to production testing. typical characteristics (25 c unless noted) 0.0 0.2 0.4 0.6 0.8 1.0 012345 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.0 0.4 0.8 1.2 1.6 2.0 v gs = 10 thru 5 v t j = 125 c ? 55 c 3 v 25 c output characteristics t ransfer characteristics v ds ? drain-to-source v oltage (v) ? drain current (a) i d v gs ? gate-to-source v oltage (v) ? drain current (a) i d 4 v 2 v % 5 s , www. e b z t f n j k q
3 typical characteristics (25 c unless noted) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 ? on-resistance ( r ds(on) ) 0 10 20 30 40 50 0 4 8 12 16 20 0.6 0.8 1.0 1.2 1.4 1.6 ? 50 ? 25 0 25 50 75 100 125 150 0 2 4 6 8 10 0.0 0.2 0.4 0.6 0.8 1.0 0.0 0.3 0.6 0.9 1.2 1.5 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 v ds ? drain-to-source v oltage (v) c rss c oss c iss v ds = 16 v i d = 0.3 a i d ? drain current (a) v gs = 4.5 v i d = 0.1 a v gs = 8 v gate charge on-resistance vs. drain current ? gate-to-source v oltage (v) q g ? total gate charge (nc) c ? capacitance (pf) v gs capacitance on-resistance vs. junction temperature t j ? junction t e mperature ( c) (normalized) ? on-resistance ( r ds(on) ) 0.0 0.4 0.8 1.2 1.6 2.0 2.4 0 4 8 12 14 16 t j = 150 c t j = 25 c i d = 0.3 a 3 0.1 0.001 source-drain diode forward v oltage on-resistance vs. gate-to-source voltage ? on-resistance ( r ds(on) ) v sd ? source-to-drain v oltage (v) v gs ? gate-to-source v oltage (v) ? source current (a) i s v gs = 4.5 v v gs = 8 v i d = 0.3 a 1 0.01 dts , www. daysemi.jp
4 typical characteristics (25 c unless noted) 10 ? 3 10 ? 2 1 10 600 10 ? 1 10 ? 4 100 ? 0.6 ? 0.4 ? 0.2 ? 0.0 0.2 0.4 ? 50 ? 25 0 25 50 75 100 125 150 i d = 250 a 2 1 0.1 0.01 0.2 0.1 0.05 0.02 single pulse duty cycle = 0.5 threshold v oltage v ariance (v) v gs(th) t j ? t emperature ( c) normalized thermal transient impedance, junction-to-ambient (to-236, DTS03K16 only) square w ave pulse duration (sec) normalized ef fective t ransient thermal impedance safe operating area (to-236, DTS03K16 only) v ds ? drain-to-source voltage (v) 10 0.1 0.1 1 10 100 0.001 1 1 ms ? drain current (a) i d 0.01 t a = 25 c single pulse 10 ms 100 ms dc 1 s 10 s safe operating area (to-226aa, DTS03K16a only) i d( on) limited r ds( on) limited bv ds s limited v ds ? drain-to-source voltage (v) 10 0.1 0.1 1 10 100 0.001 1 1 ms ? drain current (a) i d 0.01 t a = 25 c single pulse 10 ms 100 ms dc 1 s 10 s i d( on) limited i dm limited r ds ( on) limited i dm limited bv ds s limited dts , www. daysemi.jp
5 typical characteristics (25 c unless noted) 10 ? 3 10 ? 2 1 10 600 10 ? 1 10 ? 4 100 2 1 0.1 0.01 0.2 0.1 0.05 0.02 single pulse duty cycle = 0.5 normalized thermal transient impedance, junction-to-ambient (to-226aa, DTS03K16a only) square w ave pulse duration (sec) normalized ef fe ctive t ransient thermal impedance dts , www. daysemi.jp
package information www. g d \ v h p l m s 1 sot-23 (to-236): 3-lead b e e 1 1 3 2 s e e 1 d a 2 a a 1 c s e a ting pl a ne 0.10 mm 0.004" c c l 1 l q g au ge pl a ne s e a ting pl a ne 0.25 mm dim millimeters inches min max min max a 0.89 1.12 0.0 3 5 0.044 a 1 0.01 0.10 0.0004 0.004 a 2 0.88 1.02 0.0 3 46 0.040 b 0. 3 5 0.50 0.014 0.020 c 0.085 0.18 0.00 3 0.007 d 2.80 3 .04 0.110 0.120 e 2.10 2.64 0.08 3 0.104 e 1 1.20 1.40 0.047 0.055 e 0.95 bsc 0.0 3 74 ref e 1 1.90 bsc 0.0748 ref l 0.40 0.60 0.016 0.024 l 1 0.64 ref 0.025 ref s 0.50 ref 0.020 ref q 3 8 3 8 ecn: s-0 3 946-rev. k, 09-jul-01 dwg: 5479 package information document number: 71196 09-jul-01 www. g d \ v h p l m s 1 sot-23 (to-236): 3-lead b e e 1 1 3 2 s e e 1 d a 2 a a 1 c s e a ting pla ne 0.10 mm 0.004" c c l 1 l q g au ge pl a ne s e a ting pla ne 0.25 mm dim millimeters inches min max min max a 0.89 1.12 0.0 35 0.044 a 1 0.01 0.10 0.0004 0.004 a 2 0.88 1.02 0.0346 0.040 b 0. 35 0.50 0.014 0.020 c 0.085 0.18 0.00 3 0.007 d 2.80 3.04 0.110 0.120 e 2.10 2.64 0.08 3 0.104 e 1 1.20 1.40 0.047 0.055 e 0.95 bsc 0.0 374 ref e 1 1.90 bsc 0.0748 ref l 0.40 0.60 0.016 0.024 l 1 0.64 ref 0.025 ref s 0.50 ref 0.020 ref q 3 8 38 ecn: s-0 3 946-rev. k, 09-jul-01 dwg: 5479
application note www. daysemi.jp 1 application note recommended minimum pads for sot-23 0.106 (2.692) recommended mi nimum pads dimensions in inches/(mm) 0.022 (0.559) 0.049 (1.245) 0.029 (0.724) 0.037 (0.950) 0.053 (1.341) 0.097 (2.459) return to index return to index application note document number: 72609 www. daysemi.jp revision: 21-jan-08 1 application note recommended minimum pads for sot-23 0.106 (2.692) recommended mi nimum pads dimensions in inches/(mm) 0.022 (0.559) 0.049 (1.245) 0.029 (0.724) 0.037 (0.950) 0.053 (1.341) 0.097 (2.459) return to index return to index
legal disclaimer notice www. daysemi.jp 1 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. din-tek intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, din-tek ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. din-tek makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, din-tek disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on din-tek s knowledge of typical requirements that are often placed on din-tek products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify din-tek s terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, din-tek products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the din-tek product could result in personal injury or death. customers using or selling din-tek products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized din-tek personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of din-tek . product names and markings noted herein may be trad emarks of their respective owners. material category policy din-tek intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some din-tek documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. din-tek intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some din-tek documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards. legal disclaimer notice www.daysemi.jp revision: 02-oct-12 1 document number: 72610 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. din-tek intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, din-tek ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. din-tek makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, din-tek disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on din-tek s knowledge of typical requirements that are often placed on din-tek products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify din-tek s terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, din-tek products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the din-tek product could result in personal injury or death. customers using or selling din-tek products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized din-tek personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of din-tek . product names and markings noted herein may be trad emarks of their respective owners. material category policy din-tek intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some din-tek documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. din-tek intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some din-tek documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
