data sheet LDGL13743-OD ligitek electronics co.,ltd. property of ligitek only LDGL13743-OD - 2007 doc. no : qw0905- rev. : date : 15 - oct. a round type led lamps lead-free parts pb
1.5max 0.5 typ 2.54typ 1.0min 25.0min 8.6 7.6 5.0 5.9 + - ligitek electronics co.,ltd. property of ligitek only package dimensions page 1/5 part no. LDGL13743-OD note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. directivity radiation 100%75% 50%25% -60 -30 75% 025%50% 100% 0 30 60
t opr -20 ~ +80 operating temperature luminous intensity @ ma(mcd) 20 viewing angle 2 1/2 (deg) spectral halfwidth nm wave length nm forward voltage @20ma(v) material part no note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. ingan/gan LDGL13743-OD water clear green 505 lens emitted d 323.54.044 4000 2700 typ. max. typ. min. static electricity or power surge will damage the led. use of a conductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. -30 ~ +100 typical electrical & optical characteristics (ta=25 ) color dominant * storage temperature tstg 2/5 page i f forward current reverse current @5v electrostatic discharge( * ) esd ir peak forward current duty 1/10@10khz power dissipationpd i fp parameter symbol absolute maximum ratings at ta=25 ma 30 150 v 50 a ma 120 mw 100 dgl ratings unit ligitek electronics co.,ltd. property of ligitek only part no. LDGL13743-OD
600 550 500 1.0 0.5 0.0 450 3/5 page dgl chip 3.0 2.5 1.5 1.0 0.5 0.0 2.0 60100 80 02040 -40-20 0.9 0.8 100 80 5.0 4.0 3.0 2.0 1.2 1.1 1.0 60 40 20 0 -20 -40 3.0 2.5 2.0 1.5 1.0 0.5 0.0 1000 100 10 1.0 1000 100 10 1.0 0.1 1.0 ligitek electronics co.,ltd. property of ligitek only r e l a t i v e i n t e n s i t y n o r m a l i z e @ 2 0 m a fig.2 relative intensity vs. forward current forward current(ma) f o r w a r d c u r r e n t ( m a ) fig.1 forward current vs. forward voltage forward voltage(v) typical electro-optical characteristics curve r e l a t i v e i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 ambient temperature( ) fig.4 relative intensity vs. temperature f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 wavelength (nm) r e l a t i v e i n t e n s i t y @ 2 0 m a ambient temperature( ) fig.5 relative intensity vs. wavelength fig.3 forward voltage vs. temperature part no. LDGL13743-OD
page 4/5 2.wave soldering profile soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 c max soldering time:3 seconds max(one time only) distance:2mm min(from solder joint to body) ligitek electronics co.,ltd. property of ligitek only 150 time(sec) 260 c3sec max 260 temp( c) 2 /sec max 100 50 preheat 120 25 0 0 note:1.wave solder should not be made more than one time. 2.you can just only select one of the soldering conditions as above. 5 /sec max dip soldering preheat: 120 c max preheat time: 60seconds max ramp-up 2 c/sec(max) ramp-down:-5 c/sec(max) solder bath:260 c max dipping time:3 seconds max distance:2mm min(from solder joint to body) 60 seconds max part no. LDGL13743-OD
this test intended to see soldering well performed or not. the purpose of this test is the resistance of the device under tropical for hours. this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. solderability test 1.t.sol=230 5 2.dwell time=5 1sec high temperature high humidity test thermal shock test solder resistance test the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles 1.t.sol=260 5 2.dwell time= 10 1sec. 1.ta=85 2.rh=85% 3.t=240hrs 2hrs mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202:103b jis c 7021: b-11 this test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. operating life test 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) high temperature storage test low temperature storage test the purpose of this is the resistance of the device which is laid under condition of high temperature for hours. 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) reliability test: test itemtest condition description mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 jis c 7021: b-12 mil-std-883:1008 jis c 7021: b-10 reference standard ligitek electronics co.,ltd. property of ligitek only page 5/5 part no. LDGL13743-OD
|
