www.sunled.com published date : mar 04 ,2008 drawing no : sdsa 5330 v4 checked : shin chi p.1/4 part number: ZFUY07A2 surface mount display part number emitting color emitting material luminous intensity (if=10ma) ucd wavelength nm p description min. typ. ZFUY07A2 yellow gaasp/gap 480 2280 590 common anode. rt. hand decimal absolute maximum ratings (t a =25c ) uy (gaasp/gap) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 140 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 uy (gaasp/gap) unit forward voltage (typ.) (i f =10ma) v f 1.95 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =10ma) p 590 nm wavelength of dominant emission (typ.) (i f =10ma) d 588 nm spectral line full width at half-maximum (typ.) (i f =10ma) ? 35 nm capacitance (typ.) (v f =0v, f=1mhz) c 20 pf operating characteristics (ta=25c ) features 0.3 inch digit height. low current operation. excellent character appearance. i.c. compatible. mechanically rugged. gray face,white segment. package : 300pcs / reel. moisture sensitivity level : level 4. rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. the gap between the reflector and pcb shall not exceed 0.25mm. 4. specifications are subjec t to change without notice.
www.sunled.com published date : mar 04 ,2008 drawing no : sdsa 5330 v4 checked : shin chi p.2/4 part number: ZFUY07A2 surface mount display ? uy remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity/ luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
www.sunled.com published date : mar 04 ,2008 drawing no : sdsa 5330 v4 checked : shin chi p.3/4 part number: ZFUY07A2 surface mount display ? recommended soldering patte rn (units : mm;tolerance: 0.15) ? tape specification (units : mm)
www.sunled.com published date : mar 04 ,2008 drawing no : sdsa 5330 v4 checked : shin chi p.4/4 part number: ZFUY07A2 surface mount display packing & label specifications ZFUY07A2
|
