r1160x series low voltage 200ma ldo with eco pin no.ek-087-091101 cmos ldo regulator the r1160x series are cmos-based ldo regulators with eco pin featuring 200ma output. by inputting control signals from the eco pin, the mode of the regulator can be switched to low power mode or fast response mode, thus making both active and sleep modes available for the system. the ce pin can switch the regulator into standby mode. this feature helps to extend the battery life. features ? supply current (i ss1 ) typ. 40 a ( fast mode, v in =set v out +1v) ? supply current (i ss2 ) typ. 4.5 a (low power mode, same as above, v out =2.8v) ? standby current (i standby ) typ. 0.1 a (same as above, in standby) ? dropout voltage (v dif ) typ. 0.14v (fast mode, i out =200ma, v out =2.8v) typ. 0.14v (low power mode, i out =200ma, v out =2.8v) ? ripple rejection (rr)typ. 70db (fast mode, f=1khz) ? input voltage range (v in ) 1.4v to 6.0v ? output voltage range (v out )0.8v to 3.3v (internally fixed) ? output voltage accuracy 2% (fast mode) 3% (low power mode) ? temp. coeff. of output voltage typ. 100ppm/ c ? line regulationtyp. 0.05%/v (fast mode) ? fold-back protection circuit current limit typ. 50ma ? packages son-6, sot-23-5 block diagrams r1160xxx1a r1160xxx1b ( ce pin "l" active) (ce pin "h" active) v out gnd v dd ce vref current limit + - eco v out gnd v dd ce vref current limit + - eco selection guides package quantity per reel part no. son-6 3,000 pcs r1160d . xx . 1 . ? -tr-f sot-23-5 3,000 pcs r1160n . xx . 1 . ? -tr-f . xx . : specify the output voltage within the range 0.8v ( . 08 . ) to 3.3v ( . 33 . ) in 0.1v steps. . ? : select the polarity of the ce pin from ( . a . ) "l" active or ( . b . ) "h" active. packages typica l characteristic son-6 sot-23-5 6 5 4 1 2 3 top view bottom view 4 5 6 3 2 1 ? 1 3 5 4 2 1 v dd 2 nc 3 v out 4 eco 5 gnd 6 ce or ce 1 v dd 2 gnd 3 ce or ce 4 eco 5 v out r1160x261x dropout voltage vs. output current (fast response mode) ? ) the tab suspension leads are substrate level (gnd). applications ? power source for hand-held communication equipment, cameras, and vcrs ? very stable voltage reference ? power source for battery-powered equipment 0.20 0.15 0.10 0.05 0 output current i out (ma) dropout voltage v dif (v) 0 25 50 100 125 150 175 200 75 eco=h 85 c 25 c -40 c
3 * $ 0 ) $ 0 . 1 " / :
- 5 % & |