published date : feb 27, 2008 drawing no : sdsa6461 v1 checked : s hin chi p.1/4 part number: ZFUY129A surface mount display www.sunled.com part number emitting color emitting material luminous intensity (if=10ma) ucd wavelength nm p description min. typ. ZFUY129A yellow gaasp/gap 800 2940 590 common anode, rt. hand decimal preliminary spec features z 0.51 inch digit height. z low current operation. z i.c. compatible. z mechanically rugged. z gray face, white segment. z package: 400pcs / reel. z moisture sensitivity level : level 4. z rohs compliant. absolute maximum ratings (ta=25c ) uy (gaasp/ gap) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 140 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 uy (gaasp/ gap) unit forward voltage (typ.) (i f =10ma) v f 1.95 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =10ma) p 590 nm wavelength of dominant emission (typ.) (i f =10ma) d 588 nm spectral line full width at half-maximum (typ.) (i f =10ma) ? 35 nm capacitance (typ.) (v f =0v, f=1mhz) c 20 pf operating characteristics (t a =25c ) notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0. 01") unless otherwise noted. 3. the gap between the reflector and pcb shall not exceed 0.25mm. 4.specifications are subject to change without notice.
published date : feb 27, 2008 drawing no : sdsa6461 v1 checked : s hin chi p.2/4 part number: ZFUY129A surface mount display www.sunled.com remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. ? uy
published date : feb 27, 2008 drawing no : sdsa6461 v1 checked : s hin chi p.3/4 part number: ZFUY129A surface mount display www.sunled.com ? tape specification (units : mm) ? recommended soldering patte rn (units : mm;tolerance: 0.15)
published date : feb 27, 2008 drawing no : sdsa6461 v1 checked : s hin chi p.4/4 part number: ZFUY129A surface mount display www.sunled.com packing & label specifications ZFUY129A
|
