![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 1/27 giant kim / g.manager specification for approval ( ) preliminary specification ( ) final specification title 15.0? xga tft lcd buyer model sambo supplier *model suffix lg.philips lcd co., ltd. lm150x06 a4k8 *when you obtain standard approval, please use the above model name without suffix signature date / / / please return 1 copy for your confirmation with your signature and comments. platform design 2 team lg. philips lcd co., ltd approved by date reviewed by prepared by gilbert kwon / manager khan seo / engineer www.datasheet.net/ datasheet pdf - http://www..co.kr/
product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 2/27 no. item page cover contents record of revisions general description absolute maximum ratings electrical specifications electrical characteristics interface connections signal timing specifications signal timing waveforms color input data reference power sequence optical specifications mechanical characteristics reliability international standards safety emc packing designation of lot mark packing form precautions - - - 1 2 3 3-1 3-2 3-3 3-4 3-5 3-6 4 5 6 7 7-1 7-2 8 8-1 8-2 9 1 2 3 4 5 6 6 8 11 12 13 14 16 20 23 24 24 24 25 25 25 26 vcc power dip condition 3-7 15 mounting precautions operating precautions electrostatic discharge control precautions for strong light exposure storage handling precautions for protection film 9-1 9-2 9-3 9-4 9-5 9-6 26 26 27 27 27 27 www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 3/27 records of revisions revision no. date page description 1.3 jul. 05, 2002 - first draft www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 4/27 1. general description the lm150x06-a4 is a color active matrix liquid crystal display with an integral cold cathode fluoresc ent lamp(ccfl) backlight system. the matrix employs a-si thin film transistor as the active element. it is a transmissive type display operating in the normally white mode. this tft-lcd has a 15.0 inches dia gonally measured active display area with xga resolution(768 vertical by 1024 horizontal pixel array). ea ch pixel is divided into red, green and blue sub-pixels or dots which are arranged in vertical stripes. gra y scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot, th us, presenting a palette of more than 16m colors. the lm150x06-a4 has been designed to apply the lvds(8-bit,1-port) interface method. the lm150x06-a4 lcd is intended to support applications where high brightness, wide viewing angle, hi gh color saturation, and high color depth are very important. in combination with the vertical arrangement of the sub-pixels, the lm150x06-a4 characteristics provide an excellent flat panel display for office autom ation products such as monitors. general features display operating mode active screen size outline dimension pixel pitch pixel format color depth luminance, white power consumption weight surface treatments transmissive mode, normally white 15.0 inches(304.128 x 228.096) diagonal 331.3(h) 257.9(v) 11.0(d) mm (typ.) 0.297 mm x 0.297mm 1024 horiz. by 768 vert. pixels rgb stripes arrangement 16m colors ( 8-bit with frc ) 250 cd/m 2 (typ.) 9.1254 watt(typ.) 1000 g (typ.), 1050 g (max.) hard coating(3h) anti-glare treatment of the front polarizer column driver circuit row driver circuit tft-lcd (1024x768) timing control block power block lvds rx interface backlight ass?y cn.1 (20pins) 5 pairs 3.3v cn.2 [ figure 1 ] block diagram www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 5/27 2. absolute maximum ratings the following are maximum values which, if exceeded, may cause operation or damage to the unit. table 1. absolute maximum ratings parameter symbol values min. max. units notes power input voltage operating temperature storage temperature operating ambient humidity storage humidity v cc t op t st h op h st -0.3 0 -20 10 10 3.6 50 60 90 90 vdc c c %rh %rh at 25 2 c 1 1 1 note : 1. temperature and relative humidity range are shown in the [ figure 2 ]. wet bulb temperature should be 39 c max., and no condensation of water. [ figure 2 ] temperature and relative humidity www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 6/27 3. electrical specifications 3-1. electrical characteristics the lm150x06-a4 requires two power inputs. one is employed to power the lcd electronics and to drive the tft array and liquid crystal. another which powers the ccfl, is typically generated by an inverter. the inverter is an external unit to the lcd. table 2. electrical characteristics parameter symbol values min. typ. max. units notes module : signal input voltage power supply input voltage permissive power input ripple power supply input current power consumption rush current lamp : operating voltage operating current established starting voltage at 25 c at 0 c operating frequency discharge stabilization time power consumption life time v i v cc v rf i cc p cc i rush v bl i bl v bs f bl t s p bl 3.0 3.15 - - - 460 3.0 - - 45 - 40,000 3.3 3.3 - 0.438 1.4454 1.0 480 8.0 - - 60 7.68 - 3.6 3.45 0.1 0.638 2.2968 2.0 590 9.0 850 1100 80 3 8.44 - v v v pp a watts a v rms ma v rms v rms khz minutes watts hrs 1 2 3 4 5 6 7 8 note. the design of the inverter must have specifications for the lamp in lcd assembly. the performance of the lamp in lcm, for example life time or brightness, is extremely influenced by the characteristics of the dc-ac inverter. so all the parameters of an inverter should be carefully designed so as not to produce too much leakage current from high-voltage output of the inverter. when you design or order the inverter, please make sure unwanted lighting caused by the mismatch of the lamp and the inverter(no lighting,fl icker,etc) never occurs.when y ou confirm it,the lcd assembly should be operated in the same condition as installed in your instrument. note. do not attach a conducting tape to lamp connecting wire.. if the lamp wire attach to conducting tape, tft-lcd module have a low luminance and the inverter has abnormal action because leakage current occurs between lamp wire and conducting tape. 1. the specified current and power consumption are under the v cc =3.3v, 25 c, f v (frame frequency) =60hz condition whereas mosaic(black & white) pattern shown in the [ figure 3 ] is displayed. 2. the duration of rush current is about 20ms. 3. operating voltage is measured under 25 .the variance of the voltage is 10%. 4. the voltage above v bs should be applied to the lamps for more than 1 second for start-up. otherwise,the lamps may not be turned on. www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 7/27 the output of the inverter must have symmetrical(negative and positive) voltage waveform and symmetri cal current waveform.(unsymmetrical ratio is less than 10%) please do not use the inverter which has u nsymmetrical voltage and unsymmetrical current and spike wave. lamp frequency may produce interference with horizontal synchronous frequency and as a result this m ay cause beat on the display.therefore lamp frequency shall be as away as possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference. let?s define the brightness of the lamp after being lighted for 5 minutes as 100%. t s is the time required for the brightness of the center of the lamp to be not less than 95%. the used lamp current is the lamp typical current. the lamp power consumption shown above does not include loss of external inverter under 25 . the used lamp current is the lamp typical current. the life time is determined as the time at which brightness of lamp is 50% compared to that of initial valu e at the typical lamp current on condition of continuous operating at 25 2 . 5. 6. 7. 8. [ figure 3 ] mosaic pattern for power consumption measurement 9. requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp. it shall help increase the lamp lifetime and reduce its leakage current. a. the unbalance rate of the inverter waveform should be 10% below; b. the distortion rate of the waveform should be within 2 10%; c. the ideal sine wave form shall be symmetric in positive and negative polarities. * asymmetry rate = | i p ? i ?p | / i rms * 100% * distortion rate = i p (or i ?p ) / i rms 10. inverter open voltage must be more than lamp starting voltage. i p i -p www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 8/27 3-2. interface connections this lcm has three interface connections, a 20-pin co nnector is used for the module electronics and two t hree pin connectors are used for the integral back light system. the interface pin configuration for the connector is shown in the table below. lcd lvds connector : df14h-20p-1.25h(hirose) or in-20-oa 125(uju) mating connector : df14-20s-1.25c(hirose) table 3. module connector pin?s configuration pin symbol description notes 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 vcc vcc gnd gnd rx0- rx0+ gnd rx1- rx1+ gnd rx2- rx2+ gnd rxc- rxc+ gnd rx3- rx3+ gnd nc power supply +3.3v power supply +3.3v gnd gnd lvds signal(-) lvds signal(+) gnd lvds signal(-) lvds signal(+) gnd lvds signal(-) lvds signal(+) gnd lvds signal(-) lvds signal(+) gnd lvds signal(-) lvds signal(+) gnd no connection [|?r$>;$nyy$t[q5t|?{q6$}v{?$?u|?yq$or$p|{{rp?rq$?|tr?ur$n{q$? |$c??$?uvpu$?u|?yq$ny?|$or $$$$$$$$p|{{rp?rq$?|$?ur$ypq ? ?$zr?ny$snzr; $$$$$?;$nyy$c pp 5}|?r$v{}??6$}v{?$?u|?yq$or$p|{{rp?rq$?|tr?ur; interface chips lcd : single 8-bit input lvds(ns) one chip system : thc63lvdm83r(thine) or compatible transmitters *the signal pin?s assignment of transmitter is shown in the table 4. www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 9/27 table 4. required signal assignment for flatlink?s transmitter notes 1. refer to lvds transmitter data sheet for detail descriptions. 2. 7 means msb and 0 means lsb at r,g,b pixel data 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 vcc r7(msb) r5 g0(lsb) gnd g1 g2 g6 vcc g7(msb) g3 g4 gnd g5 b0(lsb) b6 r_fb b7(msb) b1 b2 gnd b3 b4 b5 res vcc hsync. vsync. pin # pin name require signals pin # pin name require signals vcc txin5 txin6 txin7 gnd txin8 txin9 txin10 vcc txin11 txin12 txin13 gnd txin14 txin15 txin16 r_fb txin17 txin18 txin19 gnd txin20 txin21 txin22 txin23 vcc txin24 txin25 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 r4 r3 r2 gnd r1 r0(lsb) r6 lvdsgnd tx0- tx0+ tx1- tx1+ lvdsvcc lvdsgnd tx2- tx2+ txc- txc+ tx3- tx3+ lvdsgnd pllgnd pllvcc pllgnd pd dclk data enable gnd txin4 txin3 txin2 gnd txin1 txin0 txin27 lvdsgnd txout0- txout0+ txout1- txout1+ lvdsvcc lvdsgnd txout2- txout2+ txcout- txcout+ txout3- txout3+ lvdsgnd pllgnd pllvcc pllgnd pd txcin txin26 gnd in/out in/out i i i i i i i i i i i i i i i i i i i i i i i i i i i i o o o o o o o o o o i i i www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 10/27 components rear view of lcm df14h-20p-1.25h (hirose) or in-20-oa 125 (uju) backlight pcb input connector [ figure 4 ] connector diagram 1 20 the backlight interface connector is a model bhr-03vs-1, manufactured by jst. the mating connector part number is sm02(8.0)b-bhs-1-tb or equivalent. the pin configuration for the connector is shown in the table 5. table 5. backlight connector pin?s configuration pin symbol description notes 1 2 3 hv nc lv power supply for lamp (high voltage side) no connect power supply for lamp (low voltage side) 1 notes : 1. the high voltage side terminal is colored pink. [ figure 5 ] backlight connector view color: pink www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 11/27 3-3. signal timing specifications this is the signal timing required at the input of the lvds transmitter. all of the interface signal timing should be satisfied with the following specifications for it?s proper operation. table 6. timing table parameter symbol min. typ. max. unit notes t clk 12.698 15.384 20.000 ns f clk 60 65 78.75 mhz period frequency dclk hsync. t hp 1096 1344 1360 period t clk t wh 8-- width t vp 800 806 862 period t hp t wv 2-- width t hp vsync. t clk t hp t hv 1024 1024 1024 horizontal valid t hbp 8160- horizontal back porch t hfp 824- horizontal front porch -- de (data enable) t vv 768 768 768 vertical valid t vbp 329- vertical back porch t vfp 23- vertical front porch - - - - data - ns for dclk t si t hi t sd t hd -- - -- - -- - -- - note 1 : t hfp + t wh + t hbp < t hv note 2 : $[|$?nvn?v|{$|s$u??{p;5|$qr6$v{}??$v?$r~?vrq$s|${|zny$|}r n?v|{; $ - - - -- -- - note 1, note 2 f v -6075 frequency hz note 2 www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 12/27 3-4. signal timing waveforms [ figure 6 ] signal timing waveforms dclk hsync., vsync., de, data, dclk t clk valid invalid invalid de(data enable) 2.3v 1v data hsync. de(data enable) vsync. de(data enable) t wh t hp t hfp t hbp t vp t wv t vbp t vfp t hv t vv t si t hi t sd t hd data are latched at the falling edge of dclk. www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 13/27 3-5. color input data reference the brightness of each primary color(red,green and blue) is based on the 8-bit gray scale data input for the color ; the higher the binary input, the brighter the color. the table below provides a reference for color versus data input. table 7. color data reference color input color data red green blue msb lsb msb lsb msb lsb r7 r6 r5 r4 r3 r2 r1 r0 0 1 0 0 0 1 1 1 black red(255) green(255) blue(255) cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 basic colors 0 0 0 : 1 1 1 red(000) dark red(001) red(002) : red(253) red(254) red(255) bright 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 red 0 0 0 : 0 0 0 green(000)dark green(001) green(002) : green(253) green(254) green(255) bright 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 green 0 0 0 : 0 0 0 blue(000) dark blue(001) blue(002) : blue(253) blue(254) blue(255) bright 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 blue 0 1 0 0 0 1 1 1 0 0 1 : 0 1 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 1 0 0 0 1 1 1 0 1 0 : 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 g7 g6 g5 g4 g3 g2 g1 g0 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 1 : 0 1 1 0 1 0 : 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 b7 b6 b5 b4 b3 b2 b1 b0 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 1 : 0 1 1 0 1 0 : 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 14/27 3-6. power sequence t 6 interface signal v i (lvds signal of transmitter) power for lamp power supply for lcd v cc 90% 10% 10% 0v 90% t 1 t 2 t 5 valid data 0v off off lamp on t 7 t 3 t 4 parameter values units min. typ. max. t 1 t 2 t 3 t 4 t 5 t 6 t 7 - 0.01 200 200 0.01 0.01 500 - - - - - - - 10 50 - - 50 10 - ms ms ms ms ms ms ms notes : 1. please avoid floating state of interface signal at invalid period. 2. when the interface signal is invalid, be sure to pull down the power supply for lcd v cc to 0v. 3. lamp power must be turn on after power supply for lcd and interface signal are valid. 0v table 8. power sequence time delay [ figure 7 ] power sequence www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 15/27 3-7. v cc power dip condition 1) dip condition 2.3v v cc 3.0v , t d 20ms 2) v cc 2.3v v cc -dip conditions should also follow the power on/off conditions for supply voltage. 3.0v 2.3v v cc t d [ figure 8 ] power dip condition www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 16/27 4. optical specification optical characteristics are determined after the unit has been ?on? and stable for approximately 30 minutes in a dark environment at 25 c. the values specified are at an approximate distance 50cm from the lcd surface at a viewing angle of and equal to 0 . [ figure 9 ] presents additional information concerning the measurement equipment and method. lcd module optical stage(x,y) field = 1 pritchard pr-880 or equivalent 500mm parameter symbol values min. typ. max. units notes contrast ratio surface luminance, white luminance variation response time rise time decay time cie color coordinates red green blue white viewing angle x axis, right( =0 ) x axis, left ( =180 ) y axis, up ( =90 ) y axis, down ( =270 ) gray scale flicker crosstalk table 9. optical characteristics cr l wh white tr tr r tr d xr yr xg yg xb yb xw yw r l u d 250 200 - - - 0.601 0.317 0.279 0.553 0.119 0.083 0.283 0.299 55 55 40 40 - 350 250 - 30 10 20 0.631 0.347 0.309 0.583 0.149 0.113 0.313 0.329 60 60 45 45 2.2 - - 1.3 45 15 30 0.661 0.377 0.339 0.613 0.179 0.143 0.343 0.359 - - - - - -18 2.2 cd/m 2 ms degree db % 1 2 3 4 5 6 figure 13 figure 14 (ta=25 c, v cc =3.3v, f v =60hz dclk=65mhz, i bl =8ma) [figure 9] optical characteristic measurement equipment and method www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 17/27 1. contrast ratio(cr) is defined mathematically as : surface luminance with all white pixels contrast ratio = surface luminance with all black pixels 2. surface luminance is the center point across the lcd surface 50cm from the surface with all pixels displaying white. for more information see [ figure 10 ]. when i bl =8ma, l wh =200cd/m 2 (min.) 250cd/m 2 (typ.) 3. the variation in surface luminance , white is determined by measuring l on at each test position 1 through 5, and then dividing the maximum l on of 5 points luminance by minimum l on of 5 points luminance. for more information see [ figure 10 ]. white = maximum(l on1 ,l on2 , ?.. l on5 ) minimum(l on1 ,l on2 , ?.. l on5 ) 4. response time is the time required for the display to transition from to black(rise time, tr r ) and from black to white(decay time, tr d ). for additional information see [ figure 11 ]. 5. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the lcd surface. for more information see [ figure 12 ]. 6. gray scale specification notes : gray level luminance(%) (typ.) l000 l031 l063 l095 l127 l159 l191 l223 l255 0.22 0.81 4.29 11.4 22.1 36.4 55.4 78.0 100 table 10. gray scale www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 18/27 [ figure 11 ] response time the response time is defined as the following figure and shall be measured by switching the input signal for ?black? and ?white?. 100 90 10 0 % optical response white black white product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 19/27 [ figure 12 ] viewing angle z v g [ [ z e 180 g " g xr g 5 ' 5 - $ % . 0 % 6 - & xl [ figure 13 ] flicker 13.1 the condition of measurement : background rgb gray (0,0,0), foreground rgb gray (0, 127, 127) half green & blue dot 13.2 the definition of flicker ac dc v t 13.3 the equation of flicker : -20log (ac, 30hz/dc) www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 20/27 5. mechanical characteristics the contents provide general mechanical charac teristics for the model lm150x06-a4. in addition, the figures in the next page are detailed mechanical drawing of the lcd. outside dimensions horizontal vertical depth horizontal vertical horizontal vertical bezel area active display area weight surface treatment hard coating 3h. anti-glare,coating treatment of the front polarizer. 331.3 0.5 mm 257.9 0.5 mm 11.0 0.5 mm 307.4 0.5 mm 231.3 0.5 mm 304.128 mm 228.096 mm 1000 g(typ.), 1050 g (max.) table 11. mechanical characteristics 14.1 the equation of crosstalk : ( ? l a[or c]2 -l a[or c]1 ? /l a[or c]1 ) 100(%)[ ll ], ( ? l b[or d]2 -l b[or d]1 ? /l b[or d]1 ) 100(%)[ ll ] pattern 1 pattern 2 (half gray: gray 127) (background: gray 127, rectangular: gray 0, gray25 5) b/4 a/4 a/2 a/4 l a2 l b2 l c2 l d2 a/8 b/8 b a a/2 b/2 l a1 l b1 l c1 l d1 b/4 b/2 [ figure 14 ] crosstalk www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 21/27 $ [ figure 15 ] yz>b=e=c:na$s|{?$cvr? www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 22/27 [ figure 16 ] yz>b=e=c:na$_rn$cvr?$ www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 23/27 6. reliability { result evaluation criteria } there should be no change which might affect the practical display function when the display quality test is conducted under normal operating condition. table 12. environment test condition no. test item conditions 1 high temperature storage test ta= 60 c 240h 2 low temperature storage test ta= -20 c 240h 3 high temperature operation test ta= 50 c 50%rh 240h 4 low temperature operation test ta= 0 c 240h 5 vibration test (non-operating) wave form : random vibration level : 1.0g rms bandwidth : 10-500hz duration : x,y,z, 20 min. one time each direction 6 shock test (non-operating) shock level : 120g waveform : half sine wave, 2ms direction : one time each direction 7 altitude storage / shipment 0 - 40,000 feet(12,192m) www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 24/27 7. international standards 7-1. safety a) ul 1950 third edition, underwriters laboratories, inc. jan. 28, 1995. standard for safety of information technology equipment including electrical business equipment. b) can/csa c22.2 no. 950-95 third edition, canadian standards association, jan. 28, 1995. standard for safety of information technology equipment including electrical business equipment. c) en 60950 : 1992+a1: 1993+a2: 1993+a3: 1995+a4: 1997+a11: 1997 iec 950 : 1991+a1: 1992+a2: 1993+a3: 1995+a4: 1996 european committee for electrotechnical standardization(cenelec) european standard for safety of information technology equipment including electrical business equipment. 7-2. emc a) ansi c63.4 ?methods of measurement of radio-noise emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. ?american national standards institute(ansi), 1992 b) c.i.s.p.r ?limits and methods of measurement of radio interface characteristics of information technology equipment.? international special committee on radio interference c) en 55022 ?limits and methods of measurement of radio interface characteristics of information technology equipment.? european committee for electrotechnical standardization (cenelec), 1998 www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 25/27 8. packing 8-1. designation of lot mark a) lot mark abcdefghi jklm a,b,c : size d : year e : month f,g : panel code h : assembly code i,j,k,l,m : serial no. note: 1. year b) location of lot mark 2. month serial no. is printed on the label. the label is attached to the backside of the lcd module. this is subject to change without prior notice. 8-2. packing form a) package quantity in one box : 8 pcs b) box size : 344mm x 315mm x 410mm. year mark 97 7 98 8 99 9 2000 0 2001 1 2002 2 2003 3 2004 4 2005 5 2006 6 2007 7 month mark jan. 1 feb. 2 mar. 3 apr. 4 may. 5 jun. 6 jul. 7 aug. 8 sep. 9 oct. a nov. b dec. c 3. serial no. serial no. mark 1 ~ 99999 00001 ~ 99999 100000 ~ a0001 ~ a9999,, z9999 www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 26/27 9. precautions please pay attention to the following when you use this tft lcd module. 9-1. mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so t hat uneven force(ex. twisted stress) is not applied to the module. and the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module. (3) please attach a transparent protective plate to the surface in order to protect the polarizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials for the cover case are not describe because the former generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth.(some cosmetics are determined to the polarizer.) (7) when the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possible. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2. operating precautions (1) the spike noise causes the mis-operation of circuits. it should be lower than following voltage : v= 200mv(over and under shoot voltage) (2) response time depends on the temperature.(in lower temperature, it becomes longer.) (3) brightness depends on the temperature. (in lower temperature, it becomes lower.) and in lower temperature, response time(required time that brightness is stable after turned on) becomes longer. (4) be careful for condensation at sudden temperature change. condensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear or spot will occur. (5) when fixed patterns are displayed for a long time, remnant image is likely to occur. (6) module has high frequency circuits. sufficient suppression to the electromagnetic interference shall be done by system manufacturers. grounding and shielding methods may be important to minimized the interference. www.datasheet.net/ datasheet pdf - http://www..co.kr/ product specification lm150x06 liquid crystal display ver. 1.3 jul. 05, 2002 27/27 since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make certain that treatment persons are connected to ground through wrist band etc. and don?t touch interface pin directly. 9-3. electrostatic discharge control strong light exposure causes degradation of polarizer and color filter. 9-4. precautions for strong light exposure when storing modules as spares for a long ti me, the following precautions are necessary. (1) store them in a dark place. do not expose the module to sunlight or fluorescent light. keep the temperature between 5 c and 35 c at normal humidity. (2) the polarizer surface should not come in contact with any other object. it is recommended that they be stored in the container in which they were shipped. 9-5. storage (1) the protection film is attached to the bezel with a small masking tape. when the protection film is peeled off, static electricity is generated betw een the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) when the module with protection film attached is stored for a long time, sometimes there remains a very small amount of glue still on the bezel after the protection film is peeled off. (3) you can remove the glue easily. when the glue remains on the bezel or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. 9-6. handling precautions for protection film www.datasheet.net/ datasheet pdf - http://www..co.kr/ |
Price & Availability of LM150X06-A4K8
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |