technical data sheet adaptor mcx jack ? bnc 50 ? jack 29K551-K00A3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances acc. iso 2768 m-h interface according to mcx side: cecc 22 220, iec 60169-36 bnc side: iec 60169- 8, mil-prf-39012, cecc 22120 documents panel piercing b 2 material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m, over chemical nickel outer contact mcx side brass nickel, 2.5-5 m outer contact bnc side brass nickel, 2.5-5 m dielectric ptfe
technical data sheet adaptor mcx jack ? bnc 50 ? jack 29K551-K00A3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 ? frequency dc to 6 ghz return loss 26 db, dc to 2 ghz 20 db, 2 to 4 ghz 18 db, 4 to 6 ghz insertion loss 0.05 x db insulation resistance 1 g ? center contact resistance 5.0 m ? , mcx side; 1.5 m ? , bnc side outer contact resistance 2.5 m ? , mcx side; 1 m ? , bnc side test voltage 750 v rms working voltage 335 v rms contact current 1.5a dc max. mechanical data mcx side bnc side mating cycles 500 min. 500 center contact captivation: axial 27 n 27 n engagement force 25 n n/a disengagement force 8 n min. to 20 n max. n/a environmental data temperature range -55c to +155c thermal shock cecc 22 220, chapter 4.6.7 vibration cecc 22 220, chapter 4.6.3 corrosion cecc 22 220, chapter 4.6.10 moisture resistance cecc 22 220, chapter 4.6.6 tooling n/a suitable cables n/a packing standard 1 pce in bag weight 11.9 g/pce draft date approved date rev. engineering change number name date gramsamer sepp 24/01/05 rong fang 18/10/05 b00 05-0566 inge mhlauer 18/10/05 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infrin g e existin g patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|