View 119-7054-XX_7352475.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

tla7000 logic analyzers tla7000 series data sheet the modular tla7000 logic analyzer series provides the speed and flexibility you need to capture logic detail on today's fastest designs. pinpoint the source of elusive errors and gain the visibility you want with large easy-to-read displays, fast data throughput, and time-correlated views of analog and digital signals through the same probe. key performance magnivu ? acquisition technology provides up to 20 ps (50 ghz) timing resolution to find and measure elusive timing problems quickly up to 156 ps (6.4 ghz)/512 mb record length timing analysis up to 1.4 ghz clock with up to 3.0 gb/s data with a data valid window of 180 ps for state acquisition analysis of high-performance synchronous buses d-max ? probing system with 0.5 pf capacitive loading eliminates need for on-board connectors, minimizes intrusion on circuits, and is ideal for differential signal applications pci express gen1 through gen3 including gen3 protocol to physical layer analysis for link widths from x1 through x16 with up to 8.0 gt/s acquisition rates and up to 16 gb deep memory (for x16 link) key features 68/102/136 channel logic analyzers with up to 512 mb record length glitch and setup/hold triggering and display finds and displays elusive hardware problems transitional storage extends the signal analysis capture time for signals that transition infrequently simultaneous state, high-speed timing, and analog analysis through the same probe pinpoints elusive faults trace problems from symptom back to root cause in real time across multiple modules by viewing time-correlated data in a wide variety of display formats comprehensive pci express probing solutions, including midbus, slot interposer, and solder-down connectors modular mainframes provide flexibility and expandability broad processor and bus support applications mipi protocol analysis ddr2 and ddr3 debug and verification signal integrity pci express debug from protocol layer to physical layer silicon validation computer system validation embedded system debug and validation processor/bus debug and verification embedded software integration, debug, and verification www.tektronix.com 1
breakthrough solutions for real-time digital systems analysis tektronix provides breakthrough digital systems analysis tools that enable digital hardware and software designers to capture and analyze the source of elusive problems that threaten product development schedules. the tla7000 series provides the speed you need to capture the source of those elusive problems, plus the visibility you want with large displays and fast system data throughput, while protecting your investment with compatibility with all tla modules. tla7012 and tla7016 mainframes the tla7012 portable and tla7016 benchtop mainframes are modular mainframes that accept tla logic analyzer and pattern generator modules. the tla7012 and tla7016 can be configured as either master or expansion mainframes to provide solutions for large numbers of buses and high channel-count requirements. the tla7012 portable mainframe offers a familiar work environment for the tla application software. it provides multiple display capability for extended desktop viewing, in addition to an internal dvd-rw, hard drive, and multiple usb ports for expansion. a replaceable hard drive is standard, ideal for security or enabling individual team members to store personal setups and data. trigger in/out connections provide an interface to other external instrumentation, such as tektronix oscilloscopes, for correlating measurement results. tla7acx and tla7bbx modules today's digital design engineers face daily pressures to speed new products to the marketplace. the tla7acx and tla7bbx series logic analyzer modules answer the need with breakthrough solutions for the entire design team, providing the ability to quickly monitor, capture, and analyze real-time digital system operation to debug, verify, optimize, and validate digital systems. hardware developers, hardware/software integrators, and embedded software developers will appreciate the range of capabilities of the tla7acx and tla7bbx series logic analyzer modules. its broad feature set includes capturing and correlating elusive hardware and software faults; providing simultaneous state, high-speed timing, and analog analysis through the same probe; using deep state acquisition to find the cause of complex problems; real-time, nonintrusive software execution tracing that correlates to source code and to hardware events; and nonintrusive connectorless probing. the tla7bbx series logic analyzer modules offer breakthrough magnivu ? technology by tektronix for providing high-speed sampling (up to 50 ghz) that dramatically changes the way logic analyzers work and enables new measurement capabilities. the tla7bbx modules offer high-speed state synchronous capture, high-speed timing capture, and analog capture through the same set of probes. they capitalize on magnivu technology to offer up to 20 ps timing on all channels, glitch and setup/hold triggering, and display and time stamp that is always on at up to 20 ps resolution. to complement the high-performance logic analyzer modules, the tla7acx series logic analyzer modules offer all the same debug and verification functionality, but with performance levels more suited to the embedded designer . the tla7acx modules offer high-speed state synchronous capture, high-speed timing capture, and analog capture through the same set of probes. magnivu technology offering up to 125 ps timing on all channels, glitch and setup/hold triggering, and display and time stamp that is always on at 125 ps resolution is available as standard on all models. module timing resolution state speed memory tla7acx 125 ps (8 ghz) up to 800 mhz up to 128 mb tla7bbx 20 ps (50 ghz) up to 1.4 ghz up to 64 mb p6800 and p6900 series probes with the industry's lowest capacitance, the p6800 and p6900 series logic analyzer probes protect the integrity of your signal - critical for connecting to fast buses like ddr2 and ddr3 where low intrusion is key to the proper operation of your design. select from single-ended and differential probes and a variety of attachment mechanisms, including the "connectorless" compression connection that eliminates the need for onboard connectors. for applications where circuit board space is at a premium, the high-density p6900 series with d-max ? probing technology offers the industry's smallest available footprint. for debugging the signal integrity glitches common on fast buses, the p6900 series works with the tla7bbx and tla7acx modules and their ilink ? tool set capability to provide icapture ? simultaneous digital-analog acquisition. this allows you to clearly see the time-correlated digital and analog behavior of your design, without the extra capacitance and setup time of double-probing. for differential signaling applications where signal integrity is critical, the high-fidelity p6980 and p6982 are perfect for those applications where noise performance is critical. in addition, the p6980 and p6982 can support the small voltage swings that differential signaling often requires. the p6962dbl, when used with a tla7000 series logic analyzer with the tla7bbx module, supports digital validation and debug of ddr3 memory with data rates up to 1600 mega-transfers per second. for board designs that do not include high-density probe footprints, the p6960 with its companion flying leadset provides the flexibility required to meet many different debug needs. datasheet 2 www.tektronix.com
autodeskew and customer deskew fixture tektronix recommends autodeskew, a standard feature available within the tla application, for deskewing probe channels and setting the sample point for synchronous applications. however, for tight time alignment in both synchronous and asynchronous applications (including magnivu), tektronix recommends the customer deskew fixture. this is an optional accessory to the tla7bbx modules that is used to perform a channel-to- channel deskew of the probes connected to the tla7bbx module to ensure tight time alignment between all channels across all probes. two different fixtures are available: customer deskew fixture for p6800 series probes customer deskew fixture for p6900 series probes for ordering details, please see the ordering information section. tla7saxx pci express logic protocol analyzer modules pci express 3.0 introduces new challenges for validation engineers. time- to-market pressures require a solution that can quickly pinpoint problems. the tla7saxx series logic protocol analyzer modules provide an innovative approach to pci express validation that spans all layers of the protocol from the physical layer to the transaction layer. reduce your time to information by viewing and searching up to 16 gb deep memory in just seconds with rapid display updates enabled by our industry-leading hardware acceleration. with improved information density you can then quickly ascertain the health of the system and identify patterns of interest (errors, specific transactions, ordered sets, etc.) with statistics using the summary profile window. protocol behavior can be viewed at the packet and transaction level interspersed with physical layer activity in a single innovative transaction window. further insight into physical layer details can be gained with the unique listing window showing packet details at the symbol level by lane and you can view individual lane activity correlated with analog waveforms from your high- bandwidth oscilloscope in the waveform window. hardware developers, hardware/software integrators, and embedded system designers will appreciate the tight integration with the tektronix logic analyzer. this provides visibility of complete system interactions with time-correlated, multibus analysis on a single display. cross triggering and a common global time stamp enables accurate and efficient debugging by showing exactly what was happening on one bus relative to another at any given instant of time. coupled with the p67sa00 series probing solutions, engineers have flexible options for platform accessibility. refer to the tlasa00 series datasheet (52w-25691-xx) for additional information on the tektronix pci express logic protocol analyzer modules. p67sa00 series probes for pci express the p67sa00 series probes provide validation engineers with a comprehensive set of pci express probing solutions, including midbus, slot interposer, and solder-down connectors. with support for pci express gen3 channel lengths up to 24 in. with two connectors, these probes offer minimal electrical loading with the highest signal fidelity and active equalization to ensure accurate data recovery of closed eyes. all p67sa00 series probes feature a graphical lane swizzling capability for maximum flexibility to accommodate unique circuit board layouts. tektronix logic analyzers C tla7000 series www.tektronix.com 3
tla7012 and tla7016 mainframe specifications general characteristics instrument slots tla7012 holds two tla modules tla7016 holds six tla modules expansion capability the tla7000 series mainframes can be used as either master or expansion mainframes (tl708ex 8-port instrument hub and expander is required for 3-8 mainframes connected together using teklink ? cable) tla7012 up to eight tla7012 mainframes can be used, providing support for up to 16 tla modules (2,176 channels) tla7016 up to eight tla7016 mainframes can be used, providing support for up to 48 tla modules (6,528 channels) tla7012 pc specifications operating system microsoft ? windows ? xp professional and multilingual user interface pack processor 2 ghz intel ? pentium ? m-760 chipset intel ? 915gm memory 1 gb ddr pc 533 mhz (sodimm), expandable to 2 gb ddr memory sound line in and mic out connectors removable hard drive 3.5 in., 80 gb serial ata, 7200 rpm optical drive internal 4.7 gb dvdr/rw external display port type one (1) dvi-d (primary - digital only) and one (1) dvi-i (secondary - digital and analog) connectors external display resolution up to 1600 1200 noninterlaced at 32-bit color, each for both primary and secondary displays network port one (1) 10/100/1000 lan with rj-45 connector usb port seven (7); three (3) in front and four (4) in rear tla7012 integral controls front panel display size: 15 in. (38.1 cm) diagonal type: active-matrix color tft lcd with backlight ion: 1024768 simultaneous display capability both the front-panel and one external display can be used simultaneously at 1024 768 resolution front panel general-purpose knob with dedicated hotkeys and knobs for horizontal and vertical scaling and scrolling touchscreen available with option 18 datasheet 4 www.tektronix.com
integrated view (iview ? ) capability tla mainframe configuration requirements gpib-iview ? (opt. 1c) usb-iview ? (opt. 2c) number of tektronix oscilloscopes that can be connected to a tla system 1 external oscilloscopes supported more than 100. for a complete listing of current supported oscilloscopes, please visit our website http://www.tektronix.com/iview . tla connections usb, trigger in, trigger out, clock out oscilloscope connections gpib-iview ? (opt. 1c) gpib, trigger in, trigger out, clock in (when available) usb-iview ? (opt. 2c) usb device port, trigger in, trigger out setup iview ? external oscilloscope wizard automates setup. data correlation after oscilloscope acquisition is complete, the data is automatically transferred to the tla and time correlated with the tla acquisition data. deskew the oscilloscope and tla data is automatically deskewed and time correlated when using the iview ? external oscilloscope cable. gpib-iview ? (opt. 1c) external oscilloscope cable length 2 m (6.6 ft.) usb-iview ? (opt. 2c) external oscilloscope cable length 2 m (6 ft.) symbolic support number of symbols/ranges unlimited (limited only by amount of virtual memory available on tla) object file formats supported ieee695, omf 51, omf 86, omf 166, omf 286, omf 386, coff, elf/dwarf 1 and 2, elf/stabs, tsf (if your software development tools do not generate output in one of the above formats, tsf, or the tektronix symbol file, a generic ascii file format is supported. the generic ascii file format is documented in the tla online help). if a format is not listed, please contact your local tektronix representative. external instrumentation interface system trigger output asserted whenever a system trigger occurs (ttl-compatible output, back-terminated into 50 ?) system trigger input forces a system trigger when asserted (adjustable threshold between 0.5 v and 1.5 v, edge sensitive, falling-edge latched) external signal output can be used to drive external circuitry from a module's trigger mechanism (ttl-compatible output, back-terminated into 50 ?) external signal input can be used to provide an external signal to arm or trigger any or all modules (adjustable threshold between 0.5 v and 1.5 v, level sensitive) tektronix logic analyzers C tla7000 series www.tektronix.com 5
power power voltage range/frequency 90-250 v ac at 45-66 hz 100-132 v ac at 360-440 hz input current 7 a maximum at 90 v ac (70 a surge) power consumption 750 w maximum tla7016 voltage range/frequency ratings apply to mainframes with serial numbers b020000 and higher. configuration a, maximum load 1000 w 100 v rms to 120 v rms , 50 hz to 60 hz and 115rms, 400 hz, 1450 w maximum configuration b, maximum load 1000 w 120 v rms to 240 v rms , 50 hz to 60 hz, 1900 w maximum tl708ex voltage range/frequency 100-240 v ac at 50-60 hz input current 2 a maximum at 100 v ac power consumption 200 w maximum environmental temperature operating +5 c to +45 c nonoperating -20 c to +60 c humidity 20% to 80% operating 30 c; 80% relative humidity (29 c maximum wet-bulb temperature) nonoperating 8% to 80% (29 c maximum wet-bulb temperature) altitude operating: -1,000 ft. to 10,000 ft. (-305 meters to 3,050 meters) safety ul3111-1, csa1010.1, en61010-1, iec61010-1 tla7012 portable mainframe physical specifications dimensions height 295 mm (11.6 in.) width 451 mm (17.75 in.) depth 460 mm (18.1 in.) weight net (without modules) 14 kg (30 lb.) shipping (typical) 27 kg (59 lb.) datasheet 6 www.tektronix.com
tla7016 benchtop mainframe physical specifications dimensions height 350 mm (13.7 in.) width 425 mm (16.7 in.) depth 673 mm (26.5 in.) weight net (without modules) 25 kg (55 lb.) shipping (typical 51.8 kg (115 lb.) tla708ex 8-port instrument hub and expander physical specifications dimensions height 51 mm (2.0 in.) width 455 mm (17.5 in.) depth 305 mm (12.0 in.) weight net 3 kg (6 lb.) shipping 5 kg (11 lb.) tla7acx logic analyzer module specifications specifications apply to all tla7acx models unless noted otherwise. general specifications number of channels all channels are acquired including clocks tla7ac2 68 channels (4 are clock channels) tla7ac3 102 channels (4 are clock and 2 are qualifier channels) tla7ac4 136 channels (4 are clock and 4 are qualifier channels) channel grouping no limit to number of groups or number of channels per group (all channels can be reused in multiple groups) module merging up to five 102-channel or 136-channel modules can be "merged" to make up to a 680-channel module. merged modules exhibit the same depth as the lesser of the five individual modules. word/setup-and-hold/glitch/transition recognizers span all five modules. range recognizers limited to three-module merge. only one set of clock connections is required. time stamp 51 bits at 125 ps resolution (3.25 days duration) clocking/acquisition modes asynchronous and synchronous 8 ghz magnivu high-speed timing is available simultaneous with all modes. number of mainframe instrument slots required per tla series module 2 tektronix logic analyzers C tla7000 series www.tektronix.com 7
data input with p6800 or p6900 series probes capacitive loading p6900 series 0.5 pf clock/data p6800 series <0.7 pf clock/data p6810 (in group configuration) 1.0 pf threshold selection range from -2.0 v to +4.5 v in 5 mv increments threshold presets include ttl (1.5 v), cmos (1.65 v), ecl (-1.3 v), pecl (3.7 v), lvpecl (2.0 v), lvcmos 1.5 v (0.75 v), lvcmos 1.8 v (0.9 v), lvcmos 2.5 v (1.25 v), lvcmos 3.3 v (1.65 v), lvds (0 v), and user defined. threshold selection channel granularity separate selection for each of the clock/qualifier channels and one per group of 16 data channels for each 34-channel probe. threshold accuracy (including probe) (35 mv + 1%) input voltage range operating 2.5 v to 5.0 v nondestructive 15 v minimum input signal swing single-ended 300 mv differential v max C v min > 150 mv input signal minimum slew rate 200 mv/ns typical datasheet 8 www.tektronix.com
state acquisition with p6800 or p6900 series probes channel configurations full channel half channel quarter channel 235 mhz 0 mhz / 450 mb/s or 470 mb/s (ddr) 450 mhz / 900 mb/s 450 mhz optional 800 mhz / 800 mb/s or 900 mb/s (ddr) 625 mhz / 1.25 gb/s state record length with time stamps (quarter/half/full channels) 8/4/2 mb, 32/16/8 mb, 128/64/32 mb, 512/256/128 mb per channel setup and hold time selection range from 16 ns before, to 8 ns after clock edge in 125 ps increments. range may be shifted towards the setup region by 0 ns [+8, -8] ns, 4 ns [+12, -4] ns, or 8 ns [+16, 0] ns setup and hold window all channels 625 ps typical single channel 500 ps typical minimum clock pulse width 500 ps (p6960, p6962, p6964, p6980, p6982, p6860), 700 ps (p6910) active clock pulse separation 400 ps demux channel selection channels can be demultiplexed to other channels through user interface with 8-channel granularity. source synchronous clocking up to four "fast latches" per module (20 max per 5-way merge) to strobe source-synchronous buses into tla7acx modules. four sets of any predefined "fast latches" may be combined with qualification data and data pipelining to store four independent source-synchronous data buses. two "fast latches" may be combined to address ddr applications. timing acquisition (with p6800 or p6900 probes) magnivu ? timing 125 ps max, adjustments to 250 ps, 500 ps, 1 ns, and 2 ns magnivu timing record length 16 kb per channel, with adjustable trigger position deep timing resolution (quarter/ half/full channels) 500 ps / 1 ns / 2 ns to 50 ms deep timing resolution with glitch storage enabled 4 ns to 50 ms deep timing record length (quarter/half/full channels with time stamps and with or without transitional storage) 8/4/2 mb, 32/16/8 mb,128/64/32 mb, 512/256/128 mb per channel deep timing record length with glitch storage enabled half of default main memory depth channel-to-channel skew 300 ps typical minimum recognizable pulse/glitch width (single channel) 500 ps (p6960, p6962, p6964, p6980, p6982, p6860), 750 ps (p6910) minimum detectable setup/hold violation 250 ps minimum recognizable multichannel trigger event sample period + channel-to-channel skew tektronix logic analyzers C tla7000 series www.tektronix.com 9
analog acquisition (with p6800 or p6900 probes) bandwidth 2 ghz typical attenuation 10x, 1% offset and gain (accuracy) 50 mv, 2% of signal amplitude channels demultiplexed 4 run/stop requirements none, analog outputs are always active icapture ? analog outputs compatible with any supported tektronix oscilloscope icapture analog output bnc cable low loss, 10x, 36 in. basic analog multiplexer functionality is offered standard on all tla7acx modules. this routes 4 fixed channels to the icapture analog output bncs. the outputs cannot be switched to other logic analyzer channels. option am enables full analog multiplexer control and allows the routing of any 4 logic analyzer channels to the icapture analog output bncs. trigger system independent trigger states 16 maximum idependent if/then clauses per state 16 maximum numger of events per if/ then clause 8 maximum number of actions per if/ then clause 8 maximum number of trigger events 18 (2 counters/timers plus any 16 other resources) number of word recognizers 16 number of transition recognizers 16 number of range recognizers 4 number of counters/timers trigger event types word, group, channel, transition, range, anything, counter value, timer value, signal, glitch, setup-and-hold violation, snapshot trigger action types trigger module, trigger all modules, trigger main, trigger magnivu, store, don't store, store sample, increment counter, decrement counter, reset counter, start timer, stop timer, reset timer, snapshot current sample, goto state, set/clear signal, do nothing maximum triggerable data rate 1250 mb/s (4x clocking mode) trigger sequence rate dc to 500 mhz (2 ns) counter/timer range 51 bits each (>50 days at 2 ns) counter rate dc to 500 mhz (2 ns) timer clock rate 500 mhz (2 ns) datasheet 10 www.tektronix.com
counter/timer latency 2 ns range recognizers double bounded (408 channel maximum). can be as wide as any group, must be grouped according to specified order of significance. setup and hold violation recognizer setup time range from 8 ns before to 7 ns after clock edge in 125 ps increments. this range may be shifted towards the positive region by 0 ns, 4 ns, or 8 ns. hold time range from 7 ns before to 8 ns after clock edge in 125 ps increments. this range may be shifted towards the positive region by 0 ns [+8, -8] ns, 4 ns [+12, -4] ns, or 8 ns [+16, 0] ns. trigger position any data sample magnivu trigger postion magnivu position can be set from 0% to 60% centered around the magnivu trigger storage control (data qualification) global (conditional), by state (start/stop), block, by trigger action, or transitional. also force main prefill selection available. physical characteristics dimensions height 262 mm (10.3 in.) width 61 mm (2.4 in.) depth 381 mm (15.0 in.) weight net 3.1 kg (6.7 lb.) shipping 6.3 kg (13.7 lb.) tektronix logic analyzers C tla7000 series trigger system www.tektronix.com 11
tla7bbx logic analyzer module specifications specifications apply to all tla7bbx models unless noted otherwise. general specifications number of channels all channels are acquired including clocks tla7bb2 68 channels (4 are clock channels) tla7bb3 102 channels (4 are clock and 2 are qualifier channels) tla7bb4 136 channels (4 are clock and 4 are qualifier channels) channel grouping no limit to number of groups or number of channels per group (all channels can be reused in multiple groups) module merging up to five 68-channel, 102-channel, or 136-channel modules can be "merged" to make up to a 680-channel module. merged modules exhibit the same depth as the lesser of the five individual modules. word/setup-and-hold/glitch/transition recognizers span all five modules. range recognizers limited to three-module merge. only one set of clock connections is required. time stamp 54 bits at 20 ps resolution (>4 days duration) clocking/acquisition modes asynchronous and synchronous. 20 ps (50 ghz) magnivu high-speed timing is available simultaneous with all modes number of mainframe instrument slots required per tla series module 2 data input with p6800 or p6900 series probes capacitive loading p6900 series 0.5 pf clock/data p6800 series <0.7 pf clock/data p6810 (in group configuration) 1.0 pf threshold selection range from -2.0 v to +4.5 v in 5 mv increments threshold presets include ttl (1.5 v), cmos (1.65 v), ecl (-1.3 v), pecl (3.7 v), lvpecl (2.0 v), lvcmos 1.5 v (0.75 v), lvcmos 1.8 v (0.9 v), lvcmos 2.5 v (1.25 v), lvcmos 3.3 v (1.65 v), lvds (0 v), and user defined. threshold selection channel granularity separate selection for each of the clock/qualifier and individual channels. threshold accuracy (including probe) (35 mv + 1%) input voltage range operating 2.5 v to 5.0 v nondestructive 15 v minimum input signal swing single-ended 200 mv differential v max C v min > 100 mv input signal minimum slew rate 200 mv/ns typical datasheet 12 www.tektronix.com
state acquisition with p6800 or p6900 series probes channel configurations configuration full channel half channel 750 mhz standard 750 mhz / 750 mb/s (1 sample/clock) 750 mhz / 1.5 gb/s (2 samples/clock) 750 mhz / 3 gb/s (4 samples/clock) 1.4 ghz optional 1.4 ghz / 1.4 gb/s (1 sample/clock) 1.4 ghz / 2.8 gb/s (2 samples/clock) state record length with time stamps (quarter/half/full channels) 4/2 mb, 8/4 mb, 16/8 mb, 32/16 mb, 64/32 mb, 128/64 mb per channel setup and hold time selection range from 15 ns before, to 7.5 ns after clock edge in 20 ps increments. range may be shifted towards the setup region by 0 ns [+7.5, -7.5] ns, 2.5 ns [+10, -5] ns, or 7.5 ns [+15, 0] ns. setup and hold window, single channel 180 ps typical minimum clock pulse width 200 ps (p6960, p6962, p6964, p6980, p6982, p6860), 250 ps (p6910) demux channel selection channels can be demultiplexed to other channels through user interface with 8-channel granularity. timing acquisition (with p6800 or p6900 probes) magnivu ? timing 20 ps max, adjustments to 40 ps, 80 ps, 160 ps, 320 ps, and 640 ps magnivu timing record length 128 kb per channel, with adjustable trigger position deep timing resolution (quarter/half/full channels) 1.25 ps / 312.5 ps / 625 ps to 50 ms deep timing resolution with glitch storage enabled 1.25 ns to 50 ms deep timing record length (quarter/half/full channels) 8/4/2 mb, 16/8/4 mb, 32/16/8 mb, 64/32/16 mb, 128/64/32 mb, 256/128/64 mb per channel deep timing record length with glitch storage enabled half of default main memory depth channel-to-channel skew (module + probe) before customer deskew 80 ps typical after customer deskew 20 ps typical minimum recognizable pulse/glitch width (single channel) 200 ps (p6960, p6962, p6964, p6980, p6982, p6860) 250 ps (p6910) minimum detectable setup/hold violation 40 ps minimum recognizable multichannel trigger event sample period + channel-to-channel skew tektronix logic analyzers C tla7000 series www.tektronix.com 13
analog acquisition (with p6800 or p6900 probes) bandwidth 3 hgz typical attenuation 10x, 1% offset and gain (accuracy) 50 mv, 2% of signal amplitude channels demultiplexed 4 run/stop requirements none, analog outputs are always active icapture ? analog outputs compatible with any supported tektronix oscilloscope icapture analog output bnc cables four (4) low loss, 10x, 36 in. trigger system independent trigger states 16 maximum idependent if/then clauses per state 16 maximum numger of events per if/ then clause 8 maximum number of actions per if/ then clause 8 maximum number of trigger events 26 (2 counters/timers plus any 24 other resources) number of word recognizers 24 number of transition recognizers 24 number of range recognizers 8 number of counters/timers trigger event types word, group, channel, transition, range, anything, counter value, timer value, signal, glitch, setup-and-hold violation, snapshot trigger action types trigger module, trigger all modules, trigger main, trigger magnivu, store, don't store, store sample, increment counter, decrement counter, reset counter, start timer, stop timer, reset timer, snapshot current sample, goto state, set/clear signal, do nothing maximum triggerable data rate 3.0 gb/s trigger machine sequence rate dc to 800 mhz (1.25 ns) counter/timer range 48 bits each (~4 days at 1.25 ns) counter rate dc to 800 mhz (1.25 ns) timer clock rate 800 mhz (1.25 ns) datasheet 14 www.tektronix.com
counter/timer test latency 0 ns range recognizers double bounded (408 channel maximum). can be as wide as any group, must be grouped according to specified order of significance. setup-and-hold violation recognizer setup time range from 7.5 ns before, to 7.5 ns after clock edge in 20 ps increments. this range may be shifted toward the positive region by 0 ns, 2.5 ns, 5 ns, or 7.5 ns. setup-and-hold violation recognizer hold time range from 7.5 ns before, to 7.5 ns after clock edge in 20 ps increments. this range may be shifted toward the positive region by 0 ns, 2.5 ns, 5 ns, or 7.5 ns. trigger position any data sample magnivu trigger postion magnivu position can be set from 0% to 60% centered around the magnivu trigger storage control (data qualification) global (conditional), by state (start/stop), block, by trigger action, or transitional. also force main prefill selection available. physical characteristics dimensions height 262 mm (10.3 in.) width 61 mm (2.4 in.) depth 381 mm (15.0 in.) weight net 3.1 kg (6.7 lb.) shipping 6.3 kg (13.7 lb.) ordering information tla7012 standard accessories tla7012 portable logic analyzer mainframe, holds two tla modules. part number description 119-7275-xx mini keyboard 119-7054-XX optical wheel mouse 200-4939-xx front-panel cover 333-4206-xx one dual-wide panel filler for empty slots 063-3881-xx tla application software cd - certificate of traceable calibration please specify power cord, language, and service options when ordering. tektronix logic analyzers C tla7000 series trigger system www.tektronix.com 15
tla7012 options option description order number opt. 18 add touch screen n/a opt. 1c add gpib-iview ? external oscilloscope interface kit (requires tla application sw v5.0 or greater) 012-1614-xx opt. 2c add usb-iview external oscilloscope interface kit (requires tla application sw v5.8 or greater) n/a opt. po add accessory pouch for tla7012 016-1441-xx opt. tl add teklink cable 174-5019-xx opt. 1k add lacart logic analyzer cart lacart opt. 88 factory install of module n/a tla7012 recommended accessories accessory description 650-4815-xx additional removable hard drive assembly (no sw) 020-2664-xx rackmount kit 016-1522-xx wheeled transport case tla7016 standard accessories tla7016 benchtop logic analyzer mainframe, holds six tla modules. part number description 333-4206-xx five (5) dual-wide panel fillers for empty slots 174-5225-xx lan cable, straight-through, rj-45 063-3671-xx tla application software cd - certificate of traceable calibration please specify power cord, language, and service options when ordering. tla7016 options option description order number opt. 1c add gpib-iview ? external oscilloscope interface kit (requires tla application sw v5.0 or greater) 012-1614-xx opt. 2c add usb-iview external oscilloscope interface kit (requires tla application sw v5.8 or greater) n/a opt. tl add teklink cable 174-5019-xx opt. btb add benchtop system mounting brackets 407-5127-xx (left) 407-5132-xx (right) opt. 1k add k4000 logic analyzer cart k4000 opt. 88 factory install of module n/a datasheet 16 www.tektronix.com
tla7016 recommended accessories accessory description 020-2369-xx rackmount kit 016-1651-xx wheeled transport case tl708ex teklink ? 8-port instrument hub and expander (used for connecting 3-to-8 tla7012 or tla7016 mainframes). includes: instruction sheet (071-1765-xx, english only). please specify power cord and service options when ordering. tla 7000 series options tla7000 series power cord options opt. a0 north america power plug (115 v, 60 hz) opt. a1 universal euro power plug (220 v, 50 hz) opt. a2 united kingdom power plug (240 v, 50 hz) opt. a3 australia power plug (240 v, 50 hz) opt. a4 north america power plug (240 v, 50 hz) opt. a5 switzerland power plug (220 v, 50 hz) opt. a6 japan power plug (100 v, 110/120 v, 60 hz) opt. a10 china power plug (50 hz) opt. a11 india power plug (50 hz) opt. a12 brazil power plug (60 hz) opt. a99 no power cord language options opt. l0 english manual opt. l5 japanese manual opt. l10 russian manual opt. l99 no manual installation options lainstal-sm installation of single mainframe and up to 3 modules or 1 to 3 modules in existing mainframe. lainstal-lg installation of single mainframe and 4 to 6 modules. tektronix logic analyzers C tla7000 series www.tektronix.com 17
gigabit lan (gbe) switch 020-2666-xx 16-port gigabit lan (gbe) switch with u.s. standard (120 v, 60 hz) power cord power cords for gigabit (gbe) switch 161-0066-00 power cord, iec320 c13, north american, straight 161-0066-09 power cord, iec320 c13, universal euro, straight 161-0066-10 power cord, iec320 c13, universal euro, straight 161-0066-11 power cord, iec320 c13, australian, straight 161-0066-12 power cord, iec320 c13, north american, straight 161-0154-00 power cord, iec320 c13, switzerland, straight 161-0298-00 power cord, iec320 c13, japan, straight 161-0304-00 power cord, iec320 c13, china, straight tla7000 series upgrades add new capabilities to your existing tla mainframe or increase the state speed, memory depth, or add full analog multiplexer capability (tla7acx only) to existing tla modules by ordering the appropriate upgrade kit. please refer to the tla family upgrade guide for further details. tla7acx logic analyzer modules tla7acx modules includes: certificate of calibration, and one-year warranty (return to tektronix). probes must be ordered separately. tla7ac2 68-channel logic analyzer module, 8 ghz timing, 235 mhz state, 2 mb record length. options for up to 128 mb record length and/ or up to 450 mhz state. tla7ac3 102-channel logic analyzer module, 8 ghz timing, 235 mhz state, 2 mb record length. options for up to 128 mb record length and/or up to 450 mhz state. tla7ac4 136-channel logic analyzer module, 8 ghz timing, 235 mhz state, 2 mb record length. options for up to 128 mb record length and/or up to 450 mhz state. tla7acx module options base configuration is 2 mb record length at 235 mhz state with basic analog multiplexer capability. opt 1s increase to 8 mb record length at 235 mhz state opt 2s increase to 32 mb record length at 235 mhz state opt 3s increase to 128 mb record length at 235 mhz state opt 4s increase to 2 mb record length at 450 mhz state opt 5s increase to 8 mb record length at 450 mhz state opt 6s increase to 32 mb record length at 450 mhz state opt 7s increase to 128 mb record length at 450 mhz state opt am enable full analog multiplexer opt. 88 factory install datasheet 18 www.tektronix.com
tla7acx language options opt. lg1 global manual opt. l99 no manual tla7bbx logic analyzer modules tla7bbx modules includes: certificate of calibration, and one-year warranty (return to tektronix). probes must be ordered separately. tla7bb2 68-channel logic analyzer module, 50 ghz magnivu timing, 750 mhz state clock, 2 mb record length. options for up to 64 mb record length and/or up to 1.4 ghz state clock. tla7bb3 102-channel logic analyzer module, 50 ghz magnivu timing, 750 mhz state clock, 2 mb record length. options for up to 64 mb record length and/or up to 1.4 ghz state clock. tla7bb4 136-channel logic analyzer module, 50 ghz magnivu timing, 750 mhz state clock, 2 mb record length. options for up to 64 mb record length and/or up to 1.4 ghz state clock. tla7bbx module options base configuration is 2 mb record length at 750 mhz state clock with full analog multiplexer capability. opt. 1s increase to 4 mb record length at 750 mhz state clock opt. 2s increase to 8 mb record length at 750 mhz state clock opt. 3s increase to 16 mb record length at 750 mhz state clock opt. 4s increase to 32 mb record length at 750 mhz state clock opt. 5s increase to 64 mb record length at 750 mhz state clock opt. 6s increase to 2 mb record length at 1.4 ghz state clock opt. 7s increase to 4 mb record length at 1.4 ghz state clock opt. 8s increase to 8 mb record length at 1.4 ghz state clock opt. 9s increase to 16 mb record length at 1.4 ghz state clock opt. as increase to 32 mb record length at 1.4 ghz state clock opt. bs increase to 64 mb record length at 1.4 ghz state clock opt. 88 factory install tla7bbx customer deskew fixture 020-2942-xx tla7bbx customer deskew fixture for p6800 series probes 020-2940-xx tla7bbx customer deskew fixture for p6900 series probes tektronix logic analyzers C tla7000 series www.tektronix.com 19
tla7bbx language options opt. l0 english manual opt. l5 japanese manual opt. l10 russian manual opt. l99 no manual service options the following service options are offered for the tla logic analyzer products. option tla7000 mainframes tla7acx modules tla7bbx modules tla7saxx modules opt. c3 calibration service 3 years x x x x opt. c5 calibration service 5 years x x x x opt. d1 calibration data report x x x opt. d3 calibration data report 3 years (with opt. c3) x x x opt. d5 calibration data report 5 years (with opt. c5) x x x opt. g3 complete care 3 years (includes loaner, scheduled calibration and more). tla7012, tla7bb2, tla7bb3, tla7bb4, tla7sa08, tla7sa16 only x x opt. g5 complete care 5 years (includes loaner, scheduled calibration and more). tla7012, tla7bb2, tla7bb3, tla7bb4, tla7sa08, tla7sa16 only x x opt. r3 repair service 3 years x x x x opt. r5 repair service 5 years x x x x opt. s1 on-site service 1 year x opt. s3 on-site service 3 years (with r or c options) x opt. r3dw repair service coverage 3 years (includes product warranty period). 3-year period starts at time of instrument purchase. x x x x opt. r5dw repair service coverage 5 years (includes product warranty period). 5-year period starts at time of instrument purchase. x x x x warranty enter the actual information in this section. tektronix is registered to iso 9001 and iso 14001 by sri quality system registrar. datasheet 20 www.tektronix.com
tektronix logic analyzers C tla7000 series www.tektronix.com 21
datasheet asean / australasia (65) 6356 3900 austria 00800 2255 4835* balkans, israel, south africa and other ise countries +41 52 675 3777 belgium 00800 2255 4835* brazil +55 (11) 3759 7627 canada 1 800 833 9200 central east europe and the baltics +41 52 675 3777 central europe & greece +41 52 675 3777 denmark +45 80 88 1401 finland +41 52 675 3777 france 00800 2255 4835* germany 00800 2255 4835* hong kong 400 820 5835 india 000 800 650 1835 italy 00800 2255 4835* japan 81 (3) 6714 3010 luxembourg +41 52 675 3777 mexico, central/south america & caribbean 52 (55) 56 04 50 90 middle east, asia, and north africa +41 52 675 3777 the netherlands 00800 2255 4835* norway 800 16098 people's republic of china 400 820 5835 poland +41 52 675 3777 portugal 80 08 12370 republic of korea 001 800 8255 2835 russia & cis +7 (495) 6647564 south africa +41 52 675 3777 spain 00800 2255 4835* sweden 00800 2255 4835* switzerland 00800 2255 4835* taiwan 886 (2) 2722 9622 united kingdom & ireland 00800 2255 4835* usa 1 800 833 9200 * european toll-free number. if not accessible, call: +41 52 675 3777 updated 10 april 2013 for further information. tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. please visit www.tektronix.com . copyright ? tektronix, inc. all rights reserved. tektronix products are covered by u.s. and foreign patents, issued and pending. information in this publication supersedes that in all previously published material. specification and price change privileges reserved. tektronix and tek are registered trademarks of tektronix, inc. all other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies. 23 sep 2013 52w-15053-17 www.tektronix.com

▲Up To Search▲

Price & Availability of 119-7054-XX

	To Download 119-7054-XX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .