published date : feb 26, 2008 drawing no : sdsa4493 v4 checked : b.l.liu p.1/4 part number: ZVG88W 3.2x1.0mm right angle smd chip led lamp www.sunled.com part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. ZVG88W green ingaalp water clear 18 59 574 120 features z 3.2mmx1.0mm right angle smt led, 1.5mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z package : 2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0. 004") unless otherwise noted. 3.specifications are subject to change without notice. absolute maximum ratings (t a =25c ) vg (ingaalp) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 150 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 vg (ingaalp) unit forward voltage (typ.) (i f =20ma) v f 2.1 v forward voltage (max.) (i f =20ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 574 nm wavelength of dominant emission (typ.) (i f =20ma) d 570 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 20 nm capacitance (typ.) (v f =0v, f=1mhz) c 15 pf operating characteristics (t a =25c )
published date : feb 26, 2008 drawing no : sdsa4493 v4 checked : b.l.liu p.2/4 part number: ZVG88W 3.2x1.0mm right angle smd chip led lamp www.sunled.com ? vg
published date : feb 26, 2008 drawing no : sdsa4493 v4 checked : b.l.liu p.3/4 part number: ZVG88W 3.2x1.0mm right angle smd chip led lamp www.sunled.com remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. ? tape specification (units : mm) ? recommended soldering pattern (units : mm; tolerance: 0.1) ? the device has a single mounting surface. the device must be mounted according to the specifications.
published date : feb 26, 2008 drawing no : sdsa4493 v4 checked : b.l.liu p.4/4 part number: ZVG88W 3.2x1.0mm right angle smd chip led lamp www.sunled.com packing & label specifications ZVG88W
|