saw bandpass filter F1G5A part no. ncmb02-F1G5A rev. date 2011-3-16 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 1/7 4 5 6 1 23 1 23 65 4 features gps application high attenuation usable bandwidth 2.4mhz no matching 50 single-ended operation ceramic surface mounted device (smd) package ( 3.0 mm * 3.0 mm ) rohs compliant package dimension C smd 3.0 3.0 dimensions shown are nominal in millimeters body : al 2 o 3 ceramic lid : kovar, ni plated terminations : au plating 0.3 ~ 1.0 um, over a 1.27 ~ 8.89 um ni plating maximum ratings parameter unit minimum typical maximum operating temperature range -30 25 70 storage temperature range -40 25 85 power handling capability dbm 10 electrostatics sensitive device ( esd ) pin configuration 2 input 5 output 1, 3, 4, 6 case ground i 1g5a
saw bandpass filter F1G5A part no. ncmb02-F1G5A rev. date 2011-3-16 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 2/7 specifications fc = 1575.42 mhz terminating source impedance : 50 terminating load impedance : 50 notes : 1) all specifications are based on the matching s chematic shown below, measured by agilent network a nalyzer and full 2 port calibration. 2) electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances minimum typical maximum unit center frequency ( fc ) - 1575.42 - mhz insertion loss (in fc +/- 2.4 mhz) - 1.5 2.0 db amplitude ripple (in fc +/- 2.4 mhz) - 0.2 1.0 dbp- p vswr (in fc +/- 2.4 mhz) - 1.5 2.0 relative attenuation dc ~ 1400 mhz 1400 ~ 1490 mhz 1490 ~ 1520 mhz 1625 ~ 1635 mhz 1800 ~ 3000 mhz 37 40 33 30 33 42 45 40 49 38 - - - - - db temperature range (operational) -30 25 70 input rf power (in fc +/- 2.4 mhz) - 10 - dbm input/output impedance 50 ohms
saw bandpass filter F1G5A part no. ncmb02-F1G5A rev. date 2011-3-16 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 3/7 input 50 output 50 matching schematic ( actual matching values may vary due to pcb layout and parasitics ) marking configuration 1) i 2) 1g5a 3) 1) pad number 1 index 2) manufacturer name 3) marking number * ink or laser marking available
saw bandpass filter F1G5A part no. ncmb02-F1G5A rev. date 2011-3-16 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 4/7 typical performance ( at 25 )
saw bandpass filter F1G5A part no. ncmb02-F1G5A rev. date 2011-3-16 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 5/7 input / output vswr charts input / output smith charts
saw bandpass filter F1G5A part no. ncmb02-F1G5A rev. date 2011-3-16 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 6/7 packing specification 1. reeling quantity : 1000 pcs / reel 2. taping structure : the tape shall be wound around t he reel in the direction shown below. tape specification 1. leader part and vacant position specification 2. tensile strength of carrier tape 4.4n/mm width 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g reel reel reel reel top cover tape top cover tape top cover tape top cover tape carrier tape carrier tape carrier tape carrier tape end end end end start start start start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 0~15 degree top cover tape direction of pull carrier tape
saw bandpass filter F1G5A part no. ncmb02-F1G5A rev. date 2011-3-16 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 7/7 carrier tape dimensions [unit : mm] part direction reel dimensions [unit : mm] a 3.40 0.1 b 3.40 0.1 c 7.25 0.1 d 1.70 0.1 e 12.00 0.1 f 8.00 0.1 tape running direction
|