50c02ss no.7519-1/7 applications ? low-frequency amplifer, high-speed switching small motor drive, muting circuit features ? large current capacity ? low collector-to-emitter saturation voltage (resistance) : r ce (sat) typ=175m [i c =0.5a, i b =50ma] ? ultrasmall package facilitates miniaturization in end products ? small on-resistance (ron) speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo 60 v collector-to-emitter voltage v ceo 50 v emitter-to-base voltage v ebo 5v collector current i c 400 ma collector current (pulse) i cp 800 ma collector dissipation p c mounted on a glass-epoxy board (20 30 1.6mm) 200 mw junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7029a-002 ordering number : EN7519a 71812 tkim/52703 tsim ta-100152 sanyo semiconductors data sheet 50c02ss npn epitaxial planar silicon transistor low-frequency general-purpose ampli er applications http:// semicon.sanyo.com/en/network product & package information ? package : ssfp ? jeita, jedec : sc-81 ? minimum packing quantity : 8,000 pcs./reel packing type: tl marking electrical connection tl yn lot no. lot no. 3 2 1 1 : base 2 : emitter 3 : collector sanyo : ssfp 1 3 12 2 3 1.4 1.4 0.3 0.3 0.8 0.6 0.07 0.07 0 to 0.02 0.25 0.2 0.45 0.1 50c02ss-tl-e
50c02ss no.7519-2/7 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb =40v, i e =0a 100 na emitter cutoff current i ebo v eb =4v, i c =0a 100 na dc current gain h fe v ce =2v, i c =10ma 300 800 gain-bandwidth product f t v ce =10v, i c =50ma 500 mhz output capacitance cob v cb =10v, f=1mhz 2.8 pf collector-to-emitter saturation voltage v ce (sat) i c =100ma, i b =10ma 50 100 mv base-to-emitter saturation voltage v be (sat) i c =100ma, i b =10ma 0.9 1.2 v collector-to-base breakdown voltage v (br)cbo i c =10 a, i e =0a 60 v collector-to-emitter breakdown voltage v (br)ceo i c =1ma, r be = 50 v emitter-to-base breakdown voltage v (br)ebo i e =10 a, i c =0a 5 v turn-on time t on see speci ed test circuit. 30 ns storage time t stg 340 ns fall time t f 55 ns switching time test circuit ordering information device package shipping memo 50c02ss-tl-e ssfp 8,000pcs./reel pb free v r r b v cc =25v v be = --5v ++ 50 input outpu t r l 220 f 470 f pw=20 s i b1 d.c. 1% i b2 i c =20i b1 = --20i b2 =200ma
50c02ss no.7519-3/7 h fe -- i c it05108 i c -- v ce it05106 i c -- v be it05107 collector-to-emitter voltage, v ce -- mv collector current, i c -- ma base-to-emitter voltage, v be -- v collector current, i c -- ma collector current, i c -- ma dc current gain, h fe 1.0 10 100 1000 3 257 3 257 3 257 1000 100 10 2 3 5 7 2 3 5 7 0 0 350 400 300 200 250 500 450 200 150 100 50 0 200 300 600 500 400 100 500 1000 800 900 100 300 400 600 700 0 0.2 0.4 0.6 0.8 1.2 1.0 ta=75 c --25 c 25 c v ce =2v v ce =2v i b =0 200 a 600 a 1ma 2ma 3ma 5ma 7ma 8ma 30ma 20ma 15ma 10ma ta=75 c 25 c - -25 c it05411 1.0 23 5 10 100 72357 1000 23 57 2 5 7 5 7 3 2 100 3 10 --25 c 25 c ta=75 c i c / i b =10 v ce (sat) -- i c collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- mv cob -- v cb it05112 v ce (sat) -- i c it05110 collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- ma output capacitance, cob -- pf collector-to-base voltage, v cb -- v it05111 v be (sat) -- i c collector current, i c -- ma base-to-emitter saturation voltage, v be (sat) -- v 27 35 2 7 35 10 100 1.0 10 1.0 7 5 3 2 1.0 23 5 357 10 272357 100 1000 10 1.0 0.1 7 5 3 2 7 5 3 2 75 c ta= - -25 c 25 c i c / i b =20 f=1mhz it05110 1000 2 3 100 7 5 2 3 7 5 10 1.0 23 5 10 100 7 23 5 7 23 5 7 1000 i c / i b =50 --25 c 25 c ta=75 c v ce (sat) -- i c it05109 collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- mv 1.0 23 5 10 100 72357 1000 23 57 2 5 7 3 2 100 3 10 --25 c 25 c ta=75 c i c / i b =20
50c02ss no.7519-4/7 f t -- i c it05113 collector current, i c -- ma gain-bandwidth product, f t -- mhz 0 0 20 40 60 80 100 120 200 150 100 50 250 140 160 p c -- ta it05114 collector dissipation, p c -- m w ambient temperature, ta -- c 1.0 5 3 100 1000 7 5 3 2 1000 100 27 5 3 27 5 3 27 10 v ce =10v base current, i b -- m a ron -- i b on resistance, ron -- f=1mhz 0.1 0.1 it06092 7 5 3 2 10 7 5 3 2 7 5 3 2 1.0 100 3 2 57 3 2 57 1.0 10 out in 1k 1k i b mounted on a glass-epoxy board(20 ? 30 ? 1.6mm)
50c02ss no.7519-5/7 embossed taping speci cation 50c02ss-tl-e
50c02ss no.7519-6/7 outline drawing land pattern example 50c02ss-tl-e mass (g) unit 0.0018 * for reference mm unit: mm 0.5 0.5 0.45 0.45 0.45 0.45 1.2
50c02ss ps no.7519-7/7 this catalog provides information as of july, 2012. speci cations and information herein are subject to change without notice. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. regarding monolithic semiconductors, if you should intend to use this ic continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. please contact us for a confirmation. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above.
|
