View A089SW01V0_7871901.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

doc . v er s io n : 0. 4 tota l pa g es : 17 da te : 20 0 8/ 2/ 2 0 product specification 8.9" color tft-lcd module model name: a089sw01 v0 < >preliminary specification < >final specification ? 2007 au optronics all rights reserved, do not copy. note: the content of this specification is subject to change . www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 1/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. record of revision version revise date page content 0 2007/11/14 draft. 0.1 2007/12/17 all first edition for customer. 0.2 2007/12/17 4 add the max. thickness. 5/6 drawing update. 7/8 pin assigement update. 8 delete typical vaule of absolute maximum rating s. 2007/12/19 8 add absolute ratings of backlight unit. 11 revise the backlight driving conditions. 11 updated led lightbar diagram. 11 updated the input data(lvds) format diagram. 0.3 2007/12/19 8 add absolute ratings of backlight unit 11 revise the backlight driving conditions. 11 updated led lightbar diagram 11 updated the input data(lvds) format diagram 0.4 2008/2/14 6 upate mechanical drawing 9 update input volatge range from 3.0v (min) to 2 .7v (min) 14 update minimun brightness value. 9 updated lcd inrush current. 11 updated led power current and led inrush curre nt. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 2/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. contents a. general description ................................ ................................................... ..................... 3 b. features ........................................... ................................................... ............................. 3 c. function block ..................................... ................................................... ........................ 3 d. general information ................................ ................................................... ..................... 4 e. outline dimension.................................. ................................................... ...................... 5 1. tft-lcd module ? front view ..................... ................................................... ...........................................5 2. tft-lcd module ? rear view...................... ................................................... ............................................6 f. electrical specifications .......................... ................................................... .................... 7 1. fpc pin assignment recommended connector ipex 20347-340e-12 ................................. ............7 2. absolute maximum ratings ........................ ................................................... ............................................8 3. absolute rating of backlight unit ............... ................................................... ...........................................8 g. electrical characteristics......................... ................................................... .................... 9 1. tft-lcd typical operation condition ............. ................................................... ......................................9 2. signal electrical characteristics............... ................................................... ............................................10 3. backlight driving conditions .................... ................................................... ............................................11 h. signal characteristic.............................. ................................................... .................... 11 1. the input data(lvds) format..................... ................................................... ...........................................11 2. interface timing................................ ................................................... ................................................... ...12 3. power on/off sequence ........................... ................................................... ...........................................13 i. optical specification (note 1, 2) ................. ................................................... ............ 14 j. absolute ratings of ambient environment ............ ................................................... . 16 k. packing form....................................... ................................................... ....................... 17 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 3/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. a. general description a089sw01 is an amorphous transmissive type tft (thi n film transistor) lcd (liquid crystal display). th is model is composed of tft-lcd, pcb (printed circuit board) with drive ic, fpc (flexible printed circuit ), and backlight unit.the timing controller is embedded, s o it is easily to design for consumer product. b. features 8.9-inch display size swvga (1024x600) resolution and stripe dot arrange ment built in timing controller led backlight sync + de mode 6 bits lvds interface support 262k color supported wide viewing angle rohs compliant green design singal power 3.3v led power 5v c. function block vdd gnd vled led tft array/cell tcon lcd driving board backlight unit 1024(r/g/b) x 3 x 600 dc-dc converter y-driver x-driver rxin0 rxin1 rxin2 rxclkin (4 pairs lvds) lcd connector(40pin) www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 4/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. d. general information no. item unit specification remark 1 display resolution dot 1024rgb(h)600(v) 2 active area mm 195.07(h) x 113.4(v) 3 screen size inch 8.9 (diagonal) 4 pixel pitch mm 0.1905(h)0.189(v) 5 color configuration -- r. g. b. stripe note 1 6 color depth -- 262k colors note 2 7 overall dimension mm 213.36(h) 129.55(v) 5.15+/-0.3(t) (with mylar) note 3 8 weight g 190g 9 panel surface treatment -- anti-glare 10 display mode -- normally white note 1: below figure shows dot stripe arrangement. note 2: the 262k color display depends on 6-bit dat a signal. note 3: not include boss. refer next page to get fu rther information. ?????????? ?? . ?????????? ?? . ???? ? ? ? ( 1 2 3?????????????? ..3070 3071 3072) (1???????? .600) www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 5/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. e. outline dimension 1. tft-lcd module ? front view www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 6/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. 2. tft-lcd module ? rear view www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 7/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. f. electrical specifications 1. fpc pin assignment recommended connector ipex 20347-340e-12 pin no symbol i/o description remark 1 gnd g ground 2 vdd p +3.3v power supply 3 vdd p +3.3v power supply 4 v edid -- +3.3v edid power 5 nc p no connection (reserve for auo test) 6 clk edid -- edid clock input 7 data edid -- edid data input 8 rxin0- i lvds differential data input(r0-r5, g0) 9 rxin0+ i lvds differential data input(r0-r5, g0) 10 gnd g ground 11 rxin1- i lvds differential data input(g1-g5, b0-b1) 12 rxin1+ i lvds differential data input(g1-g5, b0-b1) 13 gnd g ground 14 rxin2- i lvds differential data input(b2-b5, hs, vs, de) 15 rxin2+ i lvds differential data input(b2-b5, hs, vs, de) 16 gnd g ground 17 rxclkin- i lvds differential clock input 18 rxclkin+ i lvds differential clock input 19 gnd g ground 20 nc -- no connection (reserve for auo test) 21 nc -- no connection (reserve for auo test) 22 gnd g ground 23 nc -- no connection (reserve for auo test) 24 nc -- no connection (reserve for auo test) 25 gnd g ground 26 nc -- no connection (reserve for auo test) 27 nc -- no connection (reserve for auo test) 28 gnd g ground 29 vled p led power supply +5v 30 vled p led power supply +5v 31 vled_gnd g led ground 32 vled_gnd g led ground 33 vled_gnd g led ground 34 nc -- no connection (reserve for auo test) www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 8/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 35 nc -- no connection (reserve for auo test) 36 nc -- no connection (reserve for auo test) 37 nc -- no connection (reserve for auo test) 38 s_pwmin i system pwm signal input note1 39 nc -- no connection (reserve for auo test) 40 nc -- no connection (reserve for auo test) i: input pin; p: power pin; g: ground pin; note 1: the pwm pin should not connect to ground, i t should pull-high if not adjust brightness. 2. absolute maximum ratings product specification items symbol min. max. unit power voltage vcc -0.3 4 v operation temperature topa 0 60 storage temperature tstg -20 50 note 1: functional operation should be restricted u nder normal ambient temperature. 3. absolute rating of backlight unit product specification items symbol min. max. unit led driving voltage vled 6 v www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 9/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. +5.0v +12.0v vcc r1 47k r2 1k vr1 47k sw1 sw mag-spst 1 2 f1 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v (high to low) control signal (lcd module input) g. electrical characteristics the following items are measured under a stable con dition and suggested application circuit. 1. tft-lcd typical operation condition symble parameter min. typ. max. unit condition vcc logic/lcd voltage 2.7 3.3 3.6 [volt] icc vcc current - 260 [ma] vcc=3.3v,black pattern, at 60hz irush lcd inrush current - 650 - [ma] vcc rising time = 470us pcc vcc power 0.858 - [watt] vcc=3.3v , black pattern,at 60hz note: measurement conditions: www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 10/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. signal electrical characteristics input signals shall be low or hi-z state when vcc i s off it is recommended to refer the specifications of sn 75lvds82dgg (texas instruments) in detail. each signal characteristics are as follows; symbol parameter min typ max units condition vth differential input high threshold - - 100 [mv] vicm = 1.2v vtl differential input low threshold -100 - - [mv] vicm = 1.2v vid input differential voltage 250 350 450 [mv] vicm differential input common mode voltage 1.0 1.25 2 [v] vth/vtl = 100mv note: lvds signal waveform vth vid vtl vicm vss www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 11/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 3. backlight driving conditions parameter symbol min. typ. max. unit remark led power voltage vled 4.5 5 5.5 v --- led power current iled 350 400 ma input=5v led inrush current i inrush 950 1000 ma led pwm frequency l freq --- --- 1k hz led life time l l 10,000 --- --- hr note 2, 3 note 1: the led driving condition is defined for le d module (24 led). note 2: define ?led lifetime?: brightness is decrea sed to 50% of the initial value. led lifetime is re stricted under normal condition, ambient temperature = 25 and led lightbar voltage = 10v. note 3: if it uses larger led lightbar voltage more than 10v, it maybe decreases the led lifetime. h. signal characteristic 1. the input data(lvds) format note1 : please follow pswg. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 12/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. note2 : 6-bit in note3 : r/g/b data 5:msb, r/g/b data 0:lsb 2. interface timing a. timing characteristics signal item symbol min typ max unit clock timing clock frequency 1/t clock 50.4 85 mhz horizontal active t hd 1024 1024 1024 t clock horizontal blanking t hb 22 320 510 t clock horizontal timing horizontal period t h 1046 1344 1534 t clock vertical active t vd 600 600 600 th vertical blanking t vb 3 25 50 th vertical timing vertical period t v 603 625 650 th note: typical value refer to vesa standard b. timing digram www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 13/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 3. power on/off sequence vcc power and led on/off sequence is as follows. in terface signals are also shown in the chart. signal s from any system shall be hi-z state or low level wh en vcc is off. power sequence timing value parameter min. typ. max. unit t1 0.5 - 10 [ms] t2 30 40 50 [ms] t3 200 - - [ms] t4 100 - - [ms] t5 0 16 50 [ms] t6 - - 10 [ms] t7 1000 - - [ms] t7 t 5 t2 t3 valid data t1 10% 90% 10% 90% t4 t 6 power supply vcc lvds signal backlight on www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 14/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. --------------------------- ---- i. optical specification (note 1, 2) item symbol condition min. typ. max. unit remark response time rise fall tr tf =0 - - 12 18 20 30 ms ms note 3 contrast ratio cr at optimized viewing angle 200 300 - note 4 viewing angle top bottom left right cr R 10 30 50 50 50 40 60 65 65 - - - - deg. note 5 brightness y l =0 150 180 - cd/m 2 note 6 x =0 0.26 0.31 0.36 white chromaticity y =0 0.28 0.33 0.38 note 1:ambient temperature =25 , and led lightbar current i = 160 ma. to be measured in the dark room. note 2:to be measured on the center area of panel with a viewing cone of 1 by topcon luminance meter bm-7, after 15 minutes operation. note 3. definition of response time: the output signals of photo detector are measured when the input signals are changed from ?black? to ?white?(falling time) and from ?white? to ?black?(r ising time), respectively. the response time is defined as the time interval between the 10% and 90% of amplitudes. refer to figure as below. note 4.definition of contrast ratio: s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 15/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. contrast ratio is calculated with the following fo rmula. contrast ratio (cr)= note 5. definition of viewing angle, , refer to figure as below. note 6. measured at the center area of the panel wh en all the input terminals of lcd panel are electri cally opened. photo detector output when lcd is at ?white? state photo detector output when lcd is at ?black? state www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 16/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. j. absolute ratings of ambient environment no. test items conditions remark 1 high temperature storage ta= 60 240hrs 2 low temperature storage ta= -20 240hrs 3 high ttemperature operation ta= 50 240hrs 4 low temperature operation ta= 0 240hrs 5 high temperature & high humidity ta= 50 . 80% rh 240hrs operation 6 heat shock -10 ~60 , 50 cycle, 2hrs/cycle non-operation contact discharge: 4kv, 150pf(330 ? ) 1sec, 8 points, 25 times/ point. 7 esd (electrostatic discharge) air discharge: 8kv, 150pf(330 ? ) 1sec 8 points, 25 times/ point. note 3 frequency range : 10 ~ 55hz stoke : 1.5mm sweep :10~55~10hz 2 hours for each direction of x,y,z 8 vibration total 6 hours non-operation jis c7021, a-10 9 mechanical shock 220g . 2ms, x,y,z 1 times for each direction non-operation jis c7021, a-7 condition c 10 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz ?6db/octave from 200~500hz iec 68-34 11 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces note 1: ta: ambient temperature. note 2: in the standard conditions, there is not di splay function ng issue occurred. all the cosmetic specification is judged before the reliability stre ss. note 3: according to en61000-4-2, esd class b: some performance degradation allowed. no data lost. self-recoverable. no hardware failures. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 17/17 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. k. packing form 7 5 3 2 www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of A089SW01V0

	To Download A089SW01V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .