switchmode/high frequency toroidal inductor web: www.triadmagnetics.com phone 951-277-0757 fax 951-277-2757 460 harley knox blvd. perris, california 92571 publish date: december 4, 2013 leads tinned to d a b e c f g (dia.) mtg surface min. FIT80-6 description: the FIT80-6 toroidal inductor is specifically designed to minimize transients. it stores energy and therefore, conditions the output signal by leveling the current waveform providing a more stable current supply. generally used in high frequency circuits, its standard design provides an economical solution in differential mode applications or as an output inductor. electrical specifications (@25c): min. inductance (h) rated dc amps max dcr (m ? ) no bias at bias 38.07 18.11 9.7 17.0 note: no bias inductance measured at .25v, 10khz. dimensions: a b c d e f g .975 .625 1.10 .450 .624 .125 .045.003 units: in inches weight: .045 lbs. technical notes: 1. nominal inductance values are typically 10% higher than minimal rating. 2. biased inductance measured at rated dc amps. 3. operation at rated current yields approximately 40c temperature rise over 20c ambient. rohs compliance: as of manufacturing date february 2005, all standard products meet the requirements of 2011/65/eu, known as the rohs initiative. * upon printing, this document is considered ?uncontrolled?. please contact triad magnetics? website for the most current version.
|