title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 700dp7b11m2reh 2:1 9/11/2006 ST721016 c bo 1 1 without locking ring panel mounting with standard locking ring 4 5 6 63 notes: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for reference only 4. contact material: gold 5. rating: 0.4va max. @ 20 vac or vdc max. 6. electric life: 50,000 make-and-break cycles at full load 7. insulation resistance: 1,000 mega-ohm min. 8. acuation force: 300 100gf 9. travel: 1.0 0.2mm 10. contact resistance: 20 mohm max. typical @ 2-4 vdc 11. dielectric strength: 1,000 v rms @ sea level. 12. operating temp.: -30c to 85c 13. denotes critical parameter. 14. 2002/95/ec (rohs) compliant. 15. hardware to be shipped bulk t100000 - hexnut - qty 2 t100011 - lockwasher - qty 1 t100002 - lockring - qty 1 pos. 1 pos. 2 switch function (on) on 1-3, 4-6 1-2, 4-5 () = momentary a 16421 released for production 9/11/06 bo p.c. mounting 4.83 [.190 in] 4.70 [.185 in] n 1.85 [.073 in] 1 4 2 5 3 6 b 18091 dim was 6.35 5/9/08 rc 5.54 [.218 in] 6.35 [.250 in] 9.93 [.391 in] 1.30 [.051 in] 4.83 [.190 in] 1.27 [.050 in] n 3.10 [.122 in] 1.02 [.040 in] 6.35 [.250 in] 4.70 [.185 in] .76 [.030 in] nc com. 13 4 push 2 no 6 circuit diagram 5 n 6.35 [.250 in] n 6.35 [.250 in] n 1.98 [.078 in] 5.95 [.234 in] 4.75 [.187 in] c 20041 drawing clean-up / update 6/30/11 bgl 12.70 [.500 in] 11.43 [.450 in] 5.72 [.225 in] flat 1/4-40 uns - 2a e-switch logo on opposite side epoxy seal
|