- 696 - 1w005g thru 1W10G single phase 1.0 amp. glass passivated bridge rectifiers voltage range 50 to 1000 volts current 1.0 ampere f eatures ul recognized file # e-96005 glass passivated junction surge overload ratings to 30 amperes peak ideal for printed circuit board reliable low cost construction technique results in inexpensive product high temperature so ldering guaranteed: 260 / 10 seconds / 0.375? ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension m echanical data case: molded plastic lead: solder plated polarity: as marked weight: 1.07 grams rb-15 dimensions in inches and (millimeters) m aximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz , resistive or inductive load. for capacitive load, derate current by 20% type number symbol 1w 005g 1w 01g 1w 02g 1w 04g 1w 06g 1w 08g 1w 10g unit s maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current @t a = 50 i (av) 1.0 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method ) i fsm 30 a maximum instantaneous forward voltage @ 1.0a v f 1.0 v maximum dc reverse current @ t a =25 at rated dc blocking voltage @ t a =125 i r 10 500 ua ua typical thermal resistance (note) r ja r jl 36 13 /w operating temperature range t j -55 to +150 storage temperature range t stg -55 to +150 note: thermal resistance from junction to ambi ent and from junction to lead mounted on p.c.b. with 0.2? x 0.2? (5mm x 5mm) copper pads.
- 697 - ratings and characteristic curves (1w005g thru 1W10G) fig.1- maximum non-repetitive forward surge current per bridge element peak for ward surge current . (a) 1 2 10 20 100 40 60 0 10 40 30 20 50 number of cycles at 60hz fig.2- maximum forward current derating curve average for ward current . (a) 20 40 60 80 100 120 140 150 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 ambient temperature. ( c) o fig.4- typical reverse characteristics per bridge element 0 20 40 60 80 100 120 140 0.1 1 10 100 percent of rated peak reverse voltage. (%) tj=125 c 0 tj=25 c 0 fig.3- typical forward characteristics per bridge element instantaneous for ward current . (a) 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.1 0.01 1 10 20 forward voltage. (v) tj=25 c pulse width-300 s 1% duty cycle 0 instantaneous reverse current .( a)
|