2 industrial media converter w w w. o r i n g - n e t wo rk i n g. co m 2-14 rmc-121fb series industrial rack-mount card type ethernet to fber media converter with 2x10/100base-t(x) and 1x100base-fx ? each converter supports two 10/100base-t(x) ports with auto- negotiation and auto-mdi/mdi-x ? support ethernet to fiber port conversion for long distance communication ? 2 x 10/100 base-t(x) ports to save the usage of copper ports ? support store-and-forward transmission ? hot-swappable, high reliability and easy installation ? up to 18 slots of high-density installation in rmc-1000 chassis on the 19-inch rack introduction rmc-121fb series are industrial rack-mount card type ethernet to fiber media converters for the rack-mount chassis box of rmc-1000, as these converters are hot-swappable and can be easily installed on rmc-1000. rmc-121fb series provide media conversion between 2x10/100base-t(x) and 1x100base- fx. rmc-121 series allow you to extend communication distance by optical fiber. rmc-121fb series support mdi/mdix auto detection, so you dont need to use crossover wires. therefore, the rmc-121fb series, with rmc-1000 as their host, are reliable media converters that can satisfy most demands of operating environment. features v1.2 / dec, 2011 industrial media converter rack-mount ethernet to fiber media converter voltage ip surveillance and auto-controller system high reliability easy installation current temperature a v swappable hot swappable hot
d e s i g n e d fo r r u g g e d e xce l l e n ce 2-15 2-15 dimensions (unit=mm) specifcations industrial media converter rack-mount ethernet to fiber media converter v1.2 / dec, 2011 oring card-type media converter model rmc-121fb-mm-sc RMC-121FB-SS-SC physical ports 10/100base-t(x) ports in rj45 auto mdi/mdix 2 2 100base-fx fber port fiber ports specifcations fiber ports number 1 1 fiber ports standard 100base-fx 100base - fx fiber mode multi-mode single-mode fiber diameter (m) 62.5/125 m 50/125 m 9/125 m fiber optical connector sc sc typical distance (km) 2 km 30 km wavelength (nm) 1310 nm 1310 nm max. output optical power (dbm) -14 dbm -8 dbm min. output optical power (dbm) -23.5 dbm -15 dbm max. input optical power (saturation) 0db 0 dbm min. input optical power (sensitivity) -31 dbm -34 dbm link budget (db) 7.5 db 19 db technology ethernet standards ieee 802.3 for 10base-t ieee 802.3u for 100base-tx and 100base-fx ieee 802.3xfor fow control processing store-and-foward industria l ethernet switch industria l media converte r industrial device server industrial wireless access point industrial cellular vpn router network management utility accessorie s
2 industrial media converter w w w. o r i n g - n e t wo rk i n g. co m 2-16 rmc-1 a b c b - dd - ee led indicators power indicator green : power led x 1 10/100base-t(x) rj45 port indicator green for port link/act. amber for duplex/collision 100base-fx fiber port indicator green for fber port link/act power power consumption (typ.) 4.5 watts overload current protection present physical characteristics dimensions (w x d x h) 21.8 (w) x 73.1 (d) x 126 (h) mm weight (g) 137 g environmental storage temperature -40 to 85c(-40 to 185f) operating temperature -10 to 60c (14 to 140f) operating humidity 5% to 95% non-condensing regulatory approvals emi fcc part 15, cispr (en55022) class a ems en61000-4-2 (esd), en61000-4-3 (rs), en61000-4-4 (eft), en61000-4-5 (surge), en61000-4-6 (cs), en61000-4-8, en61000-4-11 shock iec60068-2-27 free fall iec60068-2-32 vibration iec60068-2-6 warranty 2 years available model model name description rmc-121fb-mm-sc industrial rack-mount card type ethernet to fber media converter with 2x10/100base-t(x) and 1x100base-fx, multi-mode, 2km/1310nm, sc connector RMC-121FB-SS-SC industrial rack-mount card type ethernet to fber media converter with 2x10/100base-t(x) and 1x100base-fx, single-mode, 30km/1310nm, sc connector packing list ? rmc-121fb ? quick installation guide optional accessories (can be purchased separately) ? fpc series : fiber patch cord ordering information code defnition 10/100base-t(x) port number fiber port number fiber port type fiber optical mode fiber optical connector option - 2 : 2 port - 1 : 1 port - f : 100base-fx - mm : multi-mode - ss : single-mode - sc : sc connector v1.2 / dec, 2011 industrial media converter rack-mount ethernet to fiber media converter
|