alternative device available SFH690ABT, sfh690at, sfh690bt, sfh690ct, sfh690dt www.vishay.com vishay semiconductors rev. 2.5, 23-may-13 1 document number: 83686 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 optocoupler phototransistor output, sop-4, 100 mil pitch, mini-flat package description the SFH690ABT, sfh690at, sfh690bt, sfh690ct, sfh690dt family has a gaas infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a 4 pin 100 mil lead pitch miniflat package. it features a high current transfer ratio, low coupling capacitance, and high isolation voltage. the coupling devices are design ed for signal transmission between two electrically sepa rated circuits. the sfh690 series is available only on tape and reel. there are 2000 parts per reel. marking for sfh690at is 690a; sfh690bt is 690b; sfh690ct is 690c; sfh690dt is 690d; SFH690ABT will be marked as 690a or 690b. features ? sop (small outline package) ? isolation test voltage, 3750 v rms (1 s) ? high collector emitter breakdown voltage, v ceo = 70 v ? low saturation voltage ? fast switching times ? temperature stable ? low coupling capacitance ? end-stackable, 0.100" (2.54 mm) spacing ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? high density mounting or space sensitive pcbs ?plcs ? telecommunication agency approvals ? ul1577, file no. e5 2744 system code u ? cul tested to csa 22.2 bulletin 5a ? bsi en 60950; en 60065 ? din en 60747-5-5 (vde 0885-5) available with option 1 ? cqc gb4943.1-2011 and gb8898-2011 (suitable for installation altitude below 2000 m) notes (1) product is rotated 180 in tape and reel cavity (2) also available in tubes, do not put t to the end 1 2 4 3 e c a c v de i179066 ordering information sfh690xx-x001t part number ctr bin package option tape and reel agency certified/package ctr (%) ul, cul, bsi 50 to 300 50 to 150 100 to 300 100 to 200 200 to 400 sop-4, 100 mil pitch SFH690ABT sfh690at3 (1) , sfh690at (2) sfh690bt3 (1) , sfh690bt (2) sfh690ct sfh690dt vde, ul, cul, bsi 50 to 300 50 to 150 100 to 300 100 to 200 200 to 400 sop-4, 100 mil pitch - - sfh690b-x001t sfh690c-x001t sfh690d-x001t s op-# 7.21 mm
alternative device available SFH690ABT, sfh690at, sfh690bt, sfh690ct, sfh690dt www.vishay.com vishay semiconductors rev. 2.5, 23-may-13 2 document number: 83686 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? stresses in excess of the absolu te maximum ratings can ca use permanent damage to the device. functional operation of the devic e is not implied at these or any other conditions in excess of those give n in the operational sections of this document. exposure to abs olute maximum ratings for extended periods of th e time can adversely affect reliability. (3) refer to reflow profile for soldering conditions for surface mounted devices. fig. 1 - permissible power dissipation vs. ambient temperature absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit input reverse voltage v r 6v dc forward current i f 50 ma surge forward current t p ? 10 s i fsm 2.5 a power di ssipation p diss 80 mw output collector emitter voltage v ceo 70 v emitter collector voltage v eco 7v collector current i c 50 ma t p ? 1 ms i c 100 ma power di ssipation p diss 150 mw coupler isolation test voltage between emitter and detector (1 s) v iso 3750 v rms isolation resistance v io = 500 v, t amb = 25 c r io ?? 10 12 ? v io = 500 v, t amb = 100 c r io ?? 10 11 ? storage temperature range t stg - 55 to + 150 c ambient temperature range t amb - 55 to + 100 c soldering temperature (1) max. 10 s dip soldering distance to seating plane ? 1.5 mm t sld 260 c 0 50 100 150 200 0 255075100125150 18484 p tot - power dissipation (mw) phototransistor diode t amb - ambient temperature (c)
alternative device available SFH690ABT, sfh690at, sfh690bt, sfh690ct, sfh690dt www.vishay.com vishay semiconductors rev. 2.5, 23-may-13 3 document number: 83686 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? minimum and maximum values are testing requirements. typical values are characteristics of the device and are the result of en gineering evaluation. typical values are for information only and are not part of the testing requirements. fig. 2 - switching operation (without saturation) electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit input forward voltage i f = 5 ma v f 1.15 1.4 v reverse current v r = 6 v i r 0.01 10 a capacitance v r = 0 v, f = 1 mhz c o 14 pf thermal resistance r thja 750 k/w output collector emitter leakage current v ce = 20 v i ceo 100 na collector emitte r capacitance v ce = 5 v, f = 1 mhz c ce 2.8 pf thermal resistance r thja 500 k/w coupler collector emitter sa turation voltage i f = 10 ma, i c = 2 ma v cesat 0.1 0.3 v coupling capaci tance f = 1 mhz c c 0.3 pf current transfer ratio (t amb = 25 c, unless otherwise specified) parameter test condition part symbol min. typ. max. unit i c /i f i f = 5 ma, v ce = 5 v SFH690ABT ctr 50 300 % sfh690at ctr 50 150 % sfh690bt ctr 100 300 % sfh690ct ctr 100 200 % sfh690dt ctr 200 400 % switching characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit rise time i c = 2 ma, v cc = 5 v, r l = 100 ? t r 3s fall time i c = 2 ma, v cc = 5 v, r l = 100 ? t f 4s turn-on time i c = 2 ma, v cc = 5 v, r l = 100 ? t on 5s turn-off time i c = 2 ma, v cc = 5 v, r l = 100 ? t off 3s isfh690at_01 r l =100 v cc =5v 50 i f
alternative device available SFH690ABT, sfh690at, sfh690bt, sfh690ct, sfh690dt www.vishay.com vishay semiconductors rev. 2.5, 23-may-13 4 document number: 83686 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? as per iec 60747-5-5, 7.4.3.8.2, this optoco upler is suitable for safe electrical in sulation only within the safety ratings . compliance with the safety ratings shall be ensured by means of protective circuits. typical characteristics (t amb = 25 c, unless otherwise specified) fig. 3 - forward voltage vs. forward current fig. 4 - collector current vs. collector emitter voltage (ns) fig. 5 - leakage current vs. ambient temperature fig. 6 - collector current vs. collector emitter voltage (sat) safety and insulation ratings parameter test condition symbol min. typ. max. unit climatic classification (according to iec 68 part 1) 55/100/21 comparative tracking index cti 175 399 v iotm 6000 v v iorm 707 v p so 350 mw i si 150 ma t si 175 c creepage distance 5 mm clearance distance 5 mm insulation thickness 0.4 mm 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 0.1 1 10 100 v f - forward voltage (v) i f - forward current (ma) t amb = 25 c t amb = 75 c t amb = 100 c t amb = 0 c t amb = - 55 c 0 5 10 15 20 25 30 35 40 012345678 i c - collector current (ma) v ce - collector emitter voltage (n s ) (v) i f = 20 ma i f = 15 ma i f = 10 ma i f = 5 ma 0.001 0.01 0.1 1 10 100 1000 10 000 - 60 - 40 - 20 0 20 40 60 80 100 i ce0 - leakage current (na) t amb - ambient temperature ( c) i f = 0 ma v ce = 40 v v ce = 24 v v ce = 12 v 0 2 4 6 8 10 12 14 00.10.20.30.4 i c - collector current (ma) v ce - collector emitter voltage ( s at) (v) i f = 1 ma i f = 10 ma i f = 5 ma i f = 2 ma
alternative device available SFH690ABT, sfh690at, sfh690bt, sfh690ct, sfh690dt www.vishay.com vishay semiconductors rev. 2.5, 23-may-13 5 document number: 83686 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - normalized current transfer ratio (sat) vs. ambient temperature fig. 8 - normalized current transfer ratio (ns) vs. ambient temperature fig. 9 - normalized ctr (ns) vs. forward current fig. 10 - normalized ctr (sat) vs. forward current fig. 11 - f ctr vs. phase angle fig. 12 - f ctr vs. collector current 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 - 60 - 40 - 20 0 20 40 60 80 100 n ctr - normalized ctr (n s ) t amb - ambient temperature ( c) normalized to: i f = 5 ma, v ce = 5 v, t amb = 25 c i f = 10 ma i f = 5 ma i f = 1 ma 0 0.2 0.4 0.6 0.8 1.0 1.2 - 60 - 40 - 20 0 20 40 60 80 100 n ctr - normalized ctr ( s at) t amb - ambient temperature ( c) v ce =0.4 v normalized to: i f = 5 ma, v ce = 5 v, t amb = 25 c i f = 5 ma i f = 10 ma i f = 1 ma 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.1 1 10 100 n ctr - normalized ctr (n s ) i f - forward current (ma) normalized to: i f = 5 a, v ce = 5 v, t amb = 25 c t amb = 0 c t amb = 100 c t amb = 75 c t amb = - 55 c t amb = 25 c 0 0.2 0.4 0.6 0.8 1.0 1.2 0.1 1 10 100 n ctr - normalized ctr ( s at) i f - forward current (ma) v ce = 0.4 v normalized to: i f = 5 ma, v ce = 5 v, t amb = 25 c t amb = 0 c t amb = 75 c t amb = - 55 c t amb = 25 c t amb = 100 c - 160 - 140 - 120 - 100 -80 -60 -40 -20 0 1 10 100 1000 pha s e (deg) f (khz) v ce = 5 v 1 10 100 1000 0.1 1 10 100 f ctr (khz) i c (ma) v cc = 5 v
alternative device available SFH690ABT, sfh690at, sfh690bt, sfh690ct, sfh690dt www.vishay.com vishay semiconductors rev. 2.5, 23-may-13 6 document number: 83686 for technical questions, contact: optocoupleranswe rs@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 13 - switching time vs. load resistance package dimensions in millimeters package marking (example of sfh690at) notes ? only option 1 is reflected in the pa ckage marking with the characters x1 ? tape and reel suffix (t) is not part of the package marking 0.1 1 10 100 1000 0.1 1 10 100 t on , t off s witching time ( s ) r l -load re s i s tance (k ) t off t on v ce = 5 v, i f = 5 ma i178037 0.61 0.86 0.46 0.36 2.67 2.41 lead coplanarity 0.10 max. 2.03 1.91 6 0.46 0.33 0.63 0.38 5.59 5.08 40 10 0.20 0.10 7.21 6.71 r 0.25 0.91 0.36 5.08 1.14 7.37 2.54 4.83 4.32 4.67 4.17 1 4 2 3 iso method a pin one id (on chamfer side of package) 690a v yww u68x1
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
