skyworks solutions, inc. ? phone [781] 376 - 3000 ? fax [781] 376 - 3100 ? sales@skyworksinc.com ? www.skyworksinc.com 204493a ? skyworks proprietary and confidential information. ? products and product information are subject to change without notice. ? february 3, 2017 1 product summary sky77 360 - 12a p ower a mplifier module for quad - band gsm / gprs / edge / td - scdma / tdd lte applications ? quad - band cellular handsets ? gmsk modulation - class 4 gsm850/900 - class 1 dcs1800/ pcs1900 - class 12 gprs multi - slot operation ? edge modulation - class e2 gsm850/900 - class e2 dcs1800/ pcs1900 ? td - scdma - bands 34 and 39 ? tdd lte - band 39 features ? high efficiency ? programmable bias for improved backed - off efficiency ? high linearit y ? low standby leakage ? compatible with dc - dc converter ? programmable current clamp ? autonomous over - voltage protection ? small , low profile package - 3 .0 x 3. 0 mm x 0 . 72 mm max. - 12- pad configuration description the sky77 360- 12a power amplifier module (pam) is designed for 2g quad - band cellular handsets support ing fixed gain gaussian minimum - shift keying (gmsk) , fixed gain linear enhanced data for gsm evolution (edge) modulation in the gsm850/900 and dcs1800/pcs1900 bands, and td - scdma modulation in b ands 34 and 39 . class12 general packet radio service (gprs) multi - slot operation is also supported. the compact 3.0 mm x 3. 0 mm x 0.72 mm ( max ) module consists of gsm850/900 and dcs1800/pcs1900 /b34/b39 power amplifier blocks, 50 - ohm input and output matching circuitry, and a multi - function power amplifier control (mfc) block. the custom silicon cmos mfc provides pa bias and product identification read - back capability and is fully programmable through the rf front - end mobile industry p rocessor interface (rffe mipi ? ). the heterojunction bipolar transistor (hbt) power amplifier blocks are fabricated onto a single lngap die; one support s the gsm850/900 bands and the other support s the dcs1800/pcs1900 / b34/b39 bands. bot h pa blocks share two common power supply pads. the ingap die, silicon die, and the passive components are mounted on a multi - layer laminate substrate. the entire assembly is encapsulated with plastic over mold.
ordering information product name order number evaluation board part number sky77 360 - 12a power amplifier module sky77 360 - 12a copyright ? 2017 , skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyworks solutions, inc. (skyworks) products or services. these materials, including the information contained herein, are provided by skyworks as a service to its customers and may be used for informational purposes only by the customer. skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentation, products, services, specifications or product descriptio n s at any time, without notice. skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other di fficulties arising from any future changes. no license, whether exp ress, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of skyworks products, information or materials, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are provided as is without warranty of any kind, whether express, implied, statutor y, or otherwise, i ncluding fitness for a particular purpose or use, merchantability, performance, quality or non - infringement of any intellectual property right; all such warranties are hereby expressly disclaimed. skyworks does not warrant the accuracy or completeness of t he information, text, graphics or other items contained within these materials. skyworks shall not be liable for any damages, including but not limited to any special, indirect, incidental, statutory, or consequent ial damages, including without limitation, lost revenues or lost profits that may result from the use of the materials or information, whether or not the recipient of m aterials has been advised of the possibility of such damage. skyworks products are not intended for use in medical, life - saving or life - sustaining applications, or other equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyworks customers using or selling skyworks products for use in such applications d o so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications using skyworks products, which may deviate from published speci fications as a r esult of design defects, errors, or operation of products outside of published parameters or design specifications. customers should include design and operating safeguards t o minimize these and other risks. skyworks assumes no liability for applications a ssistance, customer product design, or damage to any equipment resulting from the use of skyworks products outside of stated published specifications or parameters. skyworks and the skyworks symbol are trademarks or registered trademarks of skyworks soluti ons, inc., in the united states and other countries. third - party brands and names are for identification purposes only, and are the property of their respective owners. additional information, including relevant ter ms and conditions, posted at www.skyworks inc.com, are incorporated by reference.
|
