View EAIPL3528Z0_9045497.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lifecyclephase: lifecyclephase: lifecyclephase: revision : 2 expired period: forever release date:2016-03-09 09:17:20.0 1 copyright ? 2010, everlight all rights reserved. release date : dec.09.2015. issue no: dir-0001528 rev.2 www.everlightamericas.com technical data sheet top infrared led EAIPL3528Z0 features ?compatible with infrared and vapor phase reflow solder process. ? low forward voltage. ? view angle 120 ?pb free ?the product itself will remain within rohs compliant version. description ? EAIPL3528Z0 is an infrared emitting diode in miniature smd package which is molded in a water clear plastic with flat top view lens the device is spectrally matched with silicon photodiode and phototransistor. applications ? sensor ? optoelectronic switch ? camera ? vcr ? video ? smoke detector device selection guide device no. chip material lens color EAIPL3528Z0 gaalas water clear
lifecyclephase: lifecyclephase: lifecyclephase: revision : 2 expired period: forever release date:2016-03-09 09:17:20.0 datasheet EAIPL3528Z0 2 copyright ? 2010, everlight all rights reserved. release date : dec.09.2015. issue no: dir-0001528 rev.2 www.everlightamericas.com package dimensions notes: 1.all dimensions are in millimeters 2.tolerances unless dimensions ? 0.1mm absolute maximum ratings (ta=25
) parameter symbol rating unit continuous forward current i f 65 ma peak forward current *1 i fp 1.0 a reverse voltage v r 5 v operating temperature t opr -40 ~ +85
storage temperature t stg -40 ~ +100
soldering temperature *2 t sol 260
power dissipation at(or below) 25
free air temperature p d 130 mw temperature resistance junction ambient rthj-a 400 k/w notes: *1: i fp conditions--pulse width 100?s and duty 1%. *2: soldering time 5 seconds.
lifecyclephase: lifecyclephase: lifecyclephase: revision : 2 expired period: forever release date:2016-03-09 09:17:20.0 datasheet EAIPL3528Z0 3 copyright ? 2010, everlight all rights reserved. release date : dec.09.2015. issue no: dir-0001528 rev.2 www.everlightamericas.com electro -optical characteristics (ta=25
) rankings rank test condition min max unit g i f =20ma 1.0 2.5 mw/sr h 2.0 3.5 j 3.0 4.5 k 4.0 6.0 parameter symbol min. typ. max. unit condition radiant intensity ie 1.0 1.5 -- mw /sr i f =20ma 4 8 20 . i f =100ma pulse width 100?s ,duty 1% peak wavelength ?p -- 940 -- nm i f =100ma spectral bandwidth ? -- 45 -- nm i f =100ma forward voltage v f -- 1.2 1.5 v i f =20ma -- 1.4 1.8 i f =100ma pulse width 100?s ,duty 1% reverse current i r -- -- 10 ?a v r =5v view angle 2 1/2 -- 120 -- deg i f =20ma
lifecyclephase: lifecyclephase: lifecyclephase: revision : 2 expired period: forever release date:2016-03-09 09:17:20.0 datasheet EAIPL3528Z0 4 copyright ? 2010, everlight all rights reserved. release date : dec.09.2015. issue no: dir-0001528 rev.2 www.everlightamericas.com 0 -25 0 4020 60 10080 20 40 60 100 80 120 140 0 10 1 10 10 2 3 10 4 21 3 4 5 6 7 8 880 0 20 40 60 80 100 980 940 900 920 960 10201000 1040 i f =20ma ta=25c typical electrical/optical/characteristics cur ves for ir forward current vs. ambient temperature spectral distribution peak emission wavelength vs. ambient temperature forward current vs. forward voltage 75 -25 900 0 920 940 25 50 960 980 100
lifecyclephase: lifecyclephase: lifecyclephase: revision : 2 expired period: forever release date:2016-03-09 09:17:20.0 datasheet EAIPL3528Z0 5 copyright ? 2010, everlight all rights reserved. release date : dec.09.2015. issue no: dir-0001528 rev.2 www.everlightamericas.com 0 10 20 30 40 50 60 70 80 90 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 relativeradiant intensity angle(degree) relative radiant intensity vs. angular displacement
lifecyclephase: lifecyclephase: lifecyclephase: revision : 2 expired period: forever release date:2016-03-09 09:17:20.0 datasheet EAIPL3528Z0 6 copyright ? 2010, everlight all rights reserved. release date : dec.09.2015. issue no: dir-0001528 rev.2 www.everlightamericas.com precautions for use 1. over-current-proof customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package, the leds should be kept at 30
or less and 90%rh or less. 2.3 the leds should be used within a year. 2.4 after opening the package, the leds should be kept at 30
or less and 70%rh or less. 2.5 the leds should be used within 72 hours (3 days) after opening the package 2.6 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 ? 5
for min. 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
lifecyclephase: lifecyclephase: lifecyclephase: revision : 2 expired period: forever release date:2016-03-09 09:17:20.0 datasheet EAIPL3528Z0 7 copyright ? 2010, everlight all rights reserved. release date : dec.09.2015. issue no: dir-0001528 rev.2 www.everlightamericas.com 4. soldering iron each terminal is to go to the tip of soldering iron temperature less than 350
for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5. repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing.
lifecyclephase: lifecyclephase: lifecyclephase: revision : 2 expired period: forever release date:2016-03-09 09:17:20.0 datasheet EAIPL3528Z0 8 copyright ? 2010, everlight all rights reserved. release date : dec.09.2015. issue no: dir-0001528 rev.2 www.everlightamericas.com package dimensions note: the tolerances unless mentioned is ? 0.1mm ,unit = mm carrier tape dimensions:(quantity: 8000pcs/reel) note: the tolerances unless mentioned is ? 0.1mm ,unit = mm
lifecyclephase: lifecyclephase: lifecyclephase: revision : 2 expired period: forever release date:2016-03-09 09:17:20.0 datasheet EAIPL3528Z0 9 copyright ? 2010, everlight all rights reserved. release date : dec.09.2015. issue no: dir-0001528 rev.2 www.everlightamericas.com packing procedure aluminum moistue-proof bag label desiccant label label form specification cpn: customer?s production number p/n : production number qty: packing quantity cat: ranks hue: peak wavelength ref: reference lot no: lot number made in taiwan: production place notes 1. above specification may be changed without notice. everlight will reserve authority on material change for above specification. 2. when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. these specification sheets include materials protected under copyright of everlight corporation. please don?t reproduce or cause anyone to reproduce them without everlight?s consent.

▲Up To Search▲

Price & Availability of EAIPL3528Z0

	To Download EAIPL3528Z0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .